--- xserver-xorg-video-nv-1.2.0.orig/aclocal.m4
+++ xserver-xorg-video-nv-1.2.0/aclocal.m4
@@ -13,7 +13,7 @@
 
 # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
 
-# serial 48 AC_PROG_LIBTOOL
+# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL
 
 
 # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
@@ -219,14 +219,6 @@
     [pic_mode=default])
 test -z "$pic_mode" && pic_mode=default
 
-# Check if we have a version mismatch between libtool.m4 and ltmain.sh.
-#
-# Note:  This should be in AC_LIBTOOL_SETUP, _after_ $ltmain have been defined.
-#        We also should do it _before_ AC_LIBTOOL_LANG_C_CONFIG that actually
-#        calls AC_LIBTOOL_CONFIG and creates libtool.
-#
-_LT_VERSION_CHECK
-
 # Use C for the default configuration in the libtool script
 tagname=
 AC_LIBTOOL_LANG_C_CONFIG
@@ -234,41 +226,6 @@
 ])# AC_LIBTOOL_SETUP
 
 
-# _LT_VERSION_CHECK
-# -----------------
-AC_DEFUN([_LT_VERSION_CHECK],
-[AC_MSG_CHECKING([for correct ltmain.sh version])
-if test "x$ltmain" = "x" ; then
-  AC_MSG_RESULT(no)
-  AC_MSG_ERROR([
-
-*** @<:@Gentoo@:>@ sanity check failed! ***
-*** \$ltmain is not defined, please check the patch for consistency! ***
-])
-fi
-gentoo_lt_version="1.5.22"
-gentoo_ltmain_version=`sed -n '/^[[ 	]]*VERSION=/{s/^[[ 	]]*VERSION=//;p;q;}' "$ltmain"`
-if test "x$gentoo_lt_version" != "x$gentoo_ltmain_version" ; then
-  AC_MSG_RESULT(no)
-  AC_MSG_ERROR([
-
-*** @<:@Gentoo@:>@ sanity check failed! ***
-*** libtool.m4 and ltmain.sh have a version mismatch! ***
-*** (libtool.m4 = $gentoo_lt_version, ltmain.sh = $gentoo_ltmain_version) ***
-
-Please run:
-
-  libtoolize --copy --force
-
-if appropriate, please contact the maintainer of this
-package (or your distribution) for help.
-])
-else
-  AC_MSG_RESULT(yes)
-fi
-])# _LT_VERSION_CHECK
-
-
 # _LT_AC_SYS_COMPILER
 # -------------------
 AC_DEFUN([_LT_AC_SYS_COMPILER],
@@ -1399,30 +1356,6 @@
     esac
     ;;
 
-  linux*)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      supports_anon_versioning=no
-      case `$LD -v 2>/dev/null` in
-        *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11
-        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-        *\ 2.11.*) ;; # other 2.11 versions
-        *) supports_anon_versioning=yes ;;
-      esac
-      if test $supports_anon_versioning = yes; then
-        archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
-        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-      else
-        $archive_expsym_cmds="$archive_cmds"
-      fi
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
   *)
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
@@ -1464,18 +1397,6 @@
   dynamic_linker=no
   ;;
 
-kfreebsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -1487,14 +1408,7 @@
     *) objformat=elf ;;
     esac
   fi
-  # Handle Gentoo/FreeBSD as it was Linux
-  case $host_vendor in
-    gentoo)
-      version_type=linux ;;
-    *)
-      version_type=freebsd-$objformat ;;
-  esac
-
+  version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
@@ -1505,12 +1419,6 @@
       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
-    linux)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-      soname_spec='${libname}${release}${shared_ext}$major'
-      need_lib_prefix=no
-      need_version=no
-      ;;
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
@@ -1644,7 +1552,7 @@
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -1673,7 +1581,7 @@
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-knetbsd*-gnu)
+netbsdelf*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -1682,7 +1590,7 @@
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
+  dynamic_linker='NetBSD ld.elf_so'
   ;;
 
 netbsd*)
@@ -2390,7 +2298,7 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd* | kfreebsd*-gnu | dragonfly*)
+freebsd* | dragonfly*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
@@ -2444,11 +2352,11 @@
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd*)
+netbsd* | netbsdelf*-gnu)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$'
   else
@@ -3196,7 +3104,7 @@
   freebsd-elf*)
     _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no
     ;;
-  freebsd* | kfreebsd*-gnu | dragonfly*)
+  freebsd* | dragonfly*)
     # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
     # conventions
     _LT_AC_TAGVAR(ld_shlibs, $1)=yes
@@ -3355,7 +3263,7 @@
     _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir'
     _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=:
     ;;
-  linux*)
+  linux* | k*bsd*-gnu)
     case $cc_basename in
       KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -3457,7 +3365,7 @@
 	;;
     esac
     ;;
-  netbsd*)
+  netbsd* | netbsdelf*-gnu)
     if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
       _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
       wlarc=
@@ -4722,7 +4630,7 @@
   lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
   lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
   ;;
-linux*)
+linux* | k*bsd*-gnu)
   if test "$host_cpu" = ia64; then
     symcode='[[ABCDGIRSTW]]'
     lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
@@ -4995,7 +4903,7 @@
 	    ;;
 	esac
 	;;
-      freebsd* | kfreebsd*-gnu | dragonfly*)
+      freebsd* | dragonfly*)
 	# FreeBSD uses GNU C++
 	;;
       hpux9* | hpux10* | hpux11*)
@@ -5038,7 +4946,7 @@
 	    ;;
 	esac
 	;;
-      linux*)
+      linux* | k*bsd*-gnu)
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
@@ -5081,7 +4989,7 @@
 	    ;;
 	esac
 	;;
-      netbsd*)
+      netbsd* | netbsdelf*-gnu)
 	;;
       osf3* | osf4* | osf5*)
 	case $cc_basename in
@@ -5292,7 +5200,7 @@
       _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic'
       ;;
 
-    linux*)
+    linux* | k*bsd*-gnu)
       case $cc_basename in
       icc* | ecc*)
 	_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,'
@@ -5433,6 +5341,9 @@
   cygwin* | mingw*)
     _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
+  linux* | k*bsd*-gnu)
+    _LT_AC_TAGVAR(link_all_deplibs, $1)=no
+  ;;
   *)
     _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
@@ -5603,7 +5514,7 @@
       _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    linux*)
+    linux* | k*bsd*-gnu)
       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
 	tmp_addflag=
 	case $cc_basename,$host_cpu in
@@ -5629,12 +5540,13 @@
   $echo "local: *; };" >> $output_objdir/$libname.ver~
 	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
 	fi
+	_LT_AC_TAGVAR(link_all_deplibs, $1)=no
       else
 	_LT_AC_TAGVAR(ld_shlibs, $1)=no
       fi
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -5964,7 +5876,7 @@
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu | dragonfly*)
+    freebsd* | dragonfly*)
       _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir'
       _LT_AC_TAGVAR(hardcode_direct, $1)=yes
@@ -6066,7 +5978,7 @@
       _LT_AC_TAGVAR(link_all_deplibs, $1)=yes
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	_LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -6625,35 +6537,69 @@
 fi[]dnl
 ])# PKG_CHECK_MODULES
 
-dnl $Id: xorg-macros.m4,v 1.8 2005/12/09 15:28:41 kem Exp $
 dnl
-dnl Copyright 2005 Sun Microsystems, Inc.  All rights reserved.
-dnl 
-dnl Permission to use, copy, modify, distribute, and sell this software and its
-dnl documentation for any purpose is hereby granted without fee, provided that
-dnl the above copyright notice appear in all copies and that both that
-dnl copyright notice and this permission notice appear in supporting
-dnl documentation.
-dnl 
-dnl The above copyright notice and this permission notice shall be included
-dnl in all copies or substantial portions of the Software.
+dnl Copyright 2005-2006 Sun Microsystems, Inc.  All rights reserved.
 dnl 
+dnl Permission is hereby granted, free of charge, to any person obtaining a
+dnl copy of this software and associated documentation files (the
+dnl "Software"), to deal in the Software without restriction, including
+dnl without limitation the rights to use, copy, modify, merge, publish,
+dnl distribute, and/or sell copies of the Software, and to permit persons
+dnl to whom the Software is furnished to do so, provided that the above
+dnl copyright notice(s) and this permission notice appear in all copies of
+dnl the Software and that both the above copyright notice(s) and this
+dnl permission notice appear in supporting documentation.
+dnl
 dnl THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
 dnl OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-dnl IN NO EVENT SHALL THE OPEN GROUP BE LIABLE FOR ANY CLAIM, DAMAGES OR
-dnl OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
-dnl ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-dnl OTHER DEALINGS IN THE SOFTWARE.
-dnl 
-dnl Except as contained in this notice, the name of the copyright holders shall
-dnl not be used in advertising or otherwise to promote the sale, use or
-dnl other dealings in this Software without prior written authorization
-dnl from the copyright holders.
-dnl 
+dnl MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT
+dnl OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+dnl HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL
+dnl INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING
+dnl FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,
+dnl NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
+dnl WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+dnl
+dnl Except as contained in this notice, the name of a copyright holder
+dnl shall not be used in advertising or otherwise to promote the sale, use
+dnl or other dealings in this Software without prior written authorization
+dnl of the copyright holder.
+
+# XORG_MACROS_VERSION(required-version)
+# -------------------------------------
+# Minimum version: 1.1.0
+#
+# If you're using a macro added in Version 1.1 or newer, include this in
+# your configure.ac with the minimum required version, such as:
+# XORG_MACROS_VERSION(1.1)
+#
+# To force at least a version with this macro defined, also add:
+# m4_ifndef([XORG_MACROS_VERSION], [AC_FATAL([must install xorg-macros 1.1 or later before running autoconf/autogen])])
+#
+#
+# See the "minimum version" comment for each macro you use to see what 
+# version you require.
+AC_DEFUN([XORG_MACROS_VERSION],[
+	[XORG_MACROS_needed_version=$1
+	XORG_MACROS_needed_major=`echo $XORG_MACROS_needed_version | sed 's/\..*$//'`
+	XORG_MACROS_needed_minor=`echo $XORG_MACROS_needed_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
+	AC_MSG_CHECKING([if xorg-macros used to generate configure is at least ${XORG_MACROS_needed_major}.${XORG_MACROS_needed_minor}])
+	[XORG_MACROS_version=1.1.0
+	XORG_MACROS_major=`echo $XORG_MACROS_version | sed 's/\..*$//'`
+	XORG_MACROS_minor=`echo $XORG_MACROS_version | sed -e 's/^[0-9]*\.//' -e 's/\..*$//'`]
+	if test $XORG_MACROS_major -ne $XORG_MACROS_needed_major ; then
+		AC_MSG_ERROR([configure built with incompatible version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.x])
+	fi
+	if test $XORG_MACROS_minor -lt $XORG_MACROS_needed_minor ; then
+		AC_MSG_ERROR([configure built with too old of a version of xorg-macros.m4 - requires version ${XORG_MACROS_major}.${XORG_MACROS_minor}.0 or newer])
+	fi
+	AC_MSG_RESULT([yes, $XORG_MACROS_version])
+]) # XORG_MACROS_VERSION
 
 # XORG_PROG_RAWCPP()
 # ------------------
+# Minimum version: 1.0.0
+#
 # Find cpp program and necessary flags for use in pre-processing text files
 # such as man pages and config files
 AC_DEFUN([XORG_PROG_RAWCPP],[
@@ -6696,6 +6642,8 @@
 
 # XORG_MANPAGE_SECTIONS()
 # -----------------------
+# Minimum version: 1.0.0
+#
 # Determine which sections man pages go in for the different man page types
 # on this OS - replaces *ManSuffix settings in old Imake *.cf per-os files.
 # Not sure if there's any better way than just hardcoding by OS name.
@@ -6706,40 +6654,37 @@
 
 if test x$APP_MAN_SUFFIX = x    ; then
     case $host_os in
-	linux* | k*bsd*-gnu)	APP_MAN_SUFFIX=1x ;;
+	gnu* | k*bsd*-gnu)	APP_MAN_SUFFIX=1x ;;
 	*)	APP_MAN_SUFFIX=1  ;;
     esac
 fi
 if test x$APP_MAN_DIR = x    ; then
     case $host_os in
-	linux* | k*bsd*-gnu)	APP_MAN_DIR='$(mandir)/man1' ;;
+	gnu* | k*bsd*-gnu)	APP_MAN_DIR='$(mandir)/man1' ;;
 	*)	APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)' ;;
     esac
 fi
 
 if test x$LIB_MAN_SUFFIX = x    ; then
     case $host_os in
-	linux* | k*bsd*-gnu)	LIB_MAN_SUFFIX=3x ;;
 	*)	LIB_MAN_SUFFIX=3  ;;
     esac
 fi
 if test x$LIB_MAN_DIR = x    ; then
     case $host_os in
-	linux* | k*bsd*-gnu)	LIB_MAN_DIR='$(mandir)/man3' ;;
 	*)	LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)' ;;
     esac
 fi
 
 if test x$FILE_MAN_SUFFIX = x    ; then
     case $host_os in
-	linux* | k*bsd*-gnu)		FILE_MAN_SUFFIX=5x ;;
 	solaris*)	FILE_MAN_SUFFIX=4  ;;
 	*)		FILE_MAN_SUFFIX=5  ;;
     esac
 fi
 if test x$FILE_MAN_DIR = x    ; then
     case $host_os in
-	linux* | k*bsd*-gnu)	FILE_MAN_DIR='$(mandir)/man5' ;;
+	gnu* | k*bsd*-gnu)	FILE_MAN_DIR='$(mandir)/man5' ;;
 	*)	FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)' ;;
     esac
 fi
@@ -6748,14 +6693,12 @@
 # LinuxDebian, not other Linuxes, so we leave it unchanged here
 if test x$MISC_MAN_SUFFIX = x    ; then
     case $host_os in
-#	linux* | k*bsd*-gnu)		MISC_MAN_SUFFIX=7x ;;
 	solaris*)	MISC_MAN_SUFFIX=5  ;;
 	*)		MISC_MAN_SUFFIX=7  ;;
     esac
 fi
 if test x$MISC_MAN_DIR = x    ; then
     case $host_os in
-#	linux* | k*bsd*-gnu)	MISC_MAN_DIR='$(mandir)/man7' ;;
 	*)	MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)' ;;
     esac
 fi
@@ -6764,14 +6707,14 @@
 # LinuxDebian, not other Linuxes, so we leave it unchanged here
 if test x$DRIVER_MAN_SUFFIX = x    ; then
     case $host_os in
-#	linux* | k*bsd*-gnu)		DRIVER_MAN_SUFFIX=4x ;;
+#	gnu* | k*bsd*-gnu)		DRIVER_MAN_SUFFIX=4x ;;
 	solaris*)	DRIVER_MAN_SUFFIX=7  ;;
 	*)		DRIVER_MAN_SUFFIX=4  ;;
     esac
 fi
 if test x$DRIVER_MAN_DIR = x    ; then
     case $host_os in
-#	linux* | k*bsd*-gnu)	DRIVER_MAN_DIR='$(mandir)/man4' ;;
+#	gnu* | k*bsd*-gnu)	DRIVER_MAN_DIR='$(mandir)/man4' ;;
 	*)	DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)' ;;
     esac
 fi
@@ -6803,6 +6746,8 @@
 
 # XORG_CHECK_LINUXDOC
 # -------------------
+# Minimum version: 1.0.0
+#
 # Defines the variable MAKE_TEXT if the necessary tools and
 # files are found. $(MAKE_TEXT) blah.sgml will then produce blah.txt.
 # Whether or not the necessary tools and files are found can be checked
@@ -6854,6 +6799,8 @@
 
 # XORG_CHECK_MALLOC_ZERO
 # ----------------------
+# Minimum version: 1.0.0
+#
 # Defines {MALLOC,XMALLOC,XTMALLOC}_ZERO_CFLAGS appropriately if
 # malloc(0) returns NULL.  Packages should add one of these cflags to
 # their AM_CFLAGS (or other appropriate *_CFLAGS) to use them.
@@ -6898,6 +6845,78 @@
 AC_SUBST([XTMALLOC_ZERO_CFLAGS])
 ]) # XORG_CHECK_MALLOC_ZERO
 
+# XORG_WITH_LINT()
+# ----------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for source checkers such as lint and sparse if --with-lint
+# is specified.   (Use --with-lint=sparse for sparse.)
+# Sets $LINT to name of source checker passed with --with-lint (default: lint)
+# Sets $LINT_FLAGS to flags to pass to source checker
+# Sets LINT automake conditional if enabled (default: disabled)
+#
+AC_DEFUN([XORG_WITH_LINT],[
+
+# Allow checking code with lint, sparse, etc.
+AC_ARG_WITH(lint, [AC_HELP_STRING([--with-lint],
+		[Use a lint-style source code checker (default: disabled)])],
+		[use_lint=$withval], [use_lint=no])
+if test "x$use_lint" = "xyes" ; then
+	LINT="lint"
+else
+	LINT="$use_lint"
+fi
+if test "x$LINT_FLAGS" = "x" -a "x$LINT" != "xno" ; then
+    case $LINT in
+	lint|*/lint)
+	    case $host_os in
+		solaris*)
+			LINT_FLAGS="-u -b -h -erroff=E_INDISTING_FROM_TRUNC2"
+			;;
+	    esac
+	    ;;
+    esac
+fi
+
+AC_SUBST(LINT)
+AC_SUBST(LINT_FLAGS)
+AM_CONDITIONAL(LINT, [test x$LINT != xno])
+
+]) # XORG_WITH_LINT
+
+# XORG_LINT_LIBRARY(LIBNAME)
+# --------------------------
+# Minimum version: 1.1.0
+#
+# Sets up flags for building lint libraries for checking programs that call
+# functions in the library.
+# Disabled by default, enable with --enable-lint-library
+# Sets: 
+#	@LINTLIB@		- name of lint library file to make
+#	MAKE_LINT_LIB		- automake conditional
+#
+
+AC_DEFUN([XORG_LINT_LIBRARY],[
+AC_REQUIRE([XORG_WITH_LINT])
+# Build lint "library" for more indepth checks of programs calling this library
+AC_ARG_ENABLE(lint-library, [AC_HELP_STRING([--enable-lint-library],
+	[Create lint library (default: disabled)])],
+	[make_lint_lib=$enableval], [make_lint_lib=no])
+if test "x$make_lint_lib" != "xno" ; then
+	if test "x$LINT" = "xno" ; then
+		AC_MSG_ERROR([Cannot make lint library without --with-lint])
+	fi
+	if test "x$make_lint_lib" = "xyes" ; then
+		LINTLIB=llib-l$1.ln
+	else
+		LINTLIB=$make_lint_lib
+	fi
+fi
+AC_SUBST(LINTLIB)
+AM_CONDITIONAL(MAKE_LINT_LIB, [test x$make_lint_lib != xno])
+
+]) # XORG_LINT_LIBRARY
+
 dnl Copyright 2005 Red Hat, Inc
 dnl 
 dnl Permission to use, copy, modify, distribute, and sell this software and its
--- xserver-xorg-video-nv-1.2.0.orig/Makefile.in
+++ xserver-xorg-video-nv-1.2.0/Makefile.in
@@ -58,7 +58,7 @@
 DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
 	$(top_srcdir)/configure COPYING ChangeLog config.guess \
-	config.sub depcomp install-sh ltmain.sh missing
+	config.sub depcomp install-sh ltmain.sh missing mkinstalldirs
 subdir = .
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
@@ -66,7 +66,7 @@
 	$(ACLOCAL_M4)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno configure.status.lineno
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
 CONFIG_HEADER = config.h
 CONFIG_CLEAN_FILES =
 SOURCES =
@@ -129,6 +129,7 @@
 FFLAGS = @FFLAGS@
 FILE_MAN_DIR = @FILE_MAN_DIR@
 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+GREP = @GREP@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -163,13 +164,9 @@
 VERSION = @VERSION@
 XORG_CFLAGS = @XORG_CFLAGS@
 XORG_LIBS = @XORG_LIBS@
-ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-ac_pt_PKG_CONFIG = @ac_pt_PKG_CONFIG@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
@@ -186,24 +183,31 @@
 build_os = @build_os@
 build_vendor = @build_vendor@
 datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
+htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moduledir = @moduledir@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
--- xserver-xorg-video-nv-1.2.0.orig/configure
+++ xserver-xorg-video-nv-1.2.0/configure
@@ -1,10 +1,11 @@
 #! /bin/sh
 # Guess values for system-dependent variables and create Makefiles.
-# Generated by GNU Autoconf 2.59 for xf86-video-nv 1.2.0.
+# Generated by GNU Autoconf 2.60 for xf86-video-nv 1.2.0.
 #
 # Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
 #
-# Copyright (C) 2003 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
 # This configure script is free software; the Free Software Foundation
 # gives unlimited permission to copy, distribute and modify it.
 ## --------------------- ##
@@ -18,11 +19,35 @@
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
 fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
 # Support unset when possible.
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
   as_unset=unset
@@ -31,8 +56,43 @@
 fi
 
 
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
 # Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
@@ -46,18 +106,19 @@
   if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
-    $as_unset $as_var
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
   fi
 done
 
 # Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
@@ -65,157 +126,386 @@
 
 
 # Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
+# CDPATH.
+$as_unset CDPATH
 
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
 
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
+if test "x$CONFIG_SHELL" = x; then
+  if (eval ":") 2>/dev/null; then
+  as_have_required=yes
+else
+  as_have_required=no
 fi
 
+  if test $as_have_required = yes && 	 (eval ":
+(as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
 
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0) || { (exit 1); exit 1; }
+
+(
+  as_lineno_1=\$LINENO
+  as_lineno_2=\$LINENO
+  test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
+  test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
+") 2> /dev/null; then
+  :
+else
+  as_candidate_shells=
     as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
+for as_dir in /usr/bin/posix$PATH_SEPARATOR/bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
 do
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
+  case $as_dir in
 	 /*)
-	   if ("$as_dir/$as_base" -c '
+	   for as_base in sh bash ksh sh5; do
+	     as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
+	   done;;
+       esac
+done
+IFS=$as_save_IFS
+
+
+      for as_shell in $as_candidate_shells $SHELL; do
+	 # Try only shells that exist, to save several forks.
+	 if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
+		{ ("$as_shell") 2> /dev/null <<\_ASEOF
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+:
+_ASEOF
+}; then
+  CONFIG_SHELL=$as_shell
+	       as_have_required=yes
+	       if { "$as_shell" 2> /dev/null <<\_ASEOF
+# Be Bourne compatible
+if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
+  emulate sh
+  NULLCMD=:
+  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
+  # is contrary to our usage.  Disable this feature.
+  alias -g '${1+"$@"}'='"$@"'
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
+DUALCASE=1; export DUALCASE # for MKS sh
+
+:
+(as_func_return () {
+  (exit $1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = "$1" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test $exitcode = 0) || { (exit 1); exit 1; }
+
+(
   as_lineno_1=$LINENO
   as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
+
+_ASEOF
+}; then
+  break
+fi
+
+fi
+
+      done
+
+      if test "x$CONFIG_SHELL" != x; then
+  for as_var in BASH_ENV ENV
+        do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+        done
+        export CONFIG_SHELL
+        exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
+fi
+
+
+    if test $as_have_required = no; then
+  echo This script requires a shell more modern than all the
+      echo shells that I found on your system.  Please install a
+      echo modern shell, or manually run the script under such a
+      echo shell if you do have one.
+      { (exit 1); exit 1; }
+fi
+
+
+fi
+
+fi
+
+
+
+(eval "as_func_return () {
+  (exit \$1)
+}
+as_func_success () {
+  as_func_return 0
+}
+as_func_failure () {
+  as_func_return 1
+}
+as_func_ret_success () {
+  return 0
+}
+as_func_ret_failure () {
+  return 1
+}
+
+exitcode=0
+if as_func_success; then
+  :
+else
+  exitcode=1
+  echo as_func_success failed.
+fi
+
+if as_func_failure; then
+  exitcode=1
+  echo as_func_failure succeeded.
+fi
+
+if as_func_ret_success; then
+  :
+else
+  exitcode=1
+  echo as_func_ret_success failed.
+fi
+
+if as_func_ret_failure; then
+  exitcode=1
+  echo as_func_ret_failure succeeded.
+fi
+
+if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
+  :
+else
+  exitcode=1
+  echo positional parameters were not saved.
+fi
+
+test \$exitcode = 0") || {
+  echo No shell found that supports shell functions.
+  echo Please tell autoconf@gnu.org about your system,
+  echo including any error possibly output before this
+  echo message
+}
+
+
+
+  as_lineno_1=$LINENO
+  as_lineno_2=$LINENO
+  test "x$as_lineno_1" != "x$as_lineno_2" &&
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
 
   # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
   # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
   # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
     sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
       N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
       t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
+      s/-\n.*//
     ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
+  chmod +x "$as_me.lineno" ||
     { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
   # Exit status is that of the last command.
   exit
 }
 
 
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
 rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir
+fi
 echo >conf$$.file
 if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
+  as_ln_s='ln -s'
+  # ... but there are two gotchas:
+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+  # In both cases, we have to default to `cp -p'.
+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
     as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
 elif ln conf$$.file conf$$ 2>/dev/null; then
   as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
@@ -224,7 +514,19 @@
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+# Find out whether ``test -x'' works.  Don't use a zero-byte file, as
+# systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  as_executable_p="test -x"
+else
+  as_executable_p=:
+fi
+rm -f conf$$.file
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -233,15 +535,6 @@
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
 
 
 # Check that we are running under the correct shell.
@@ -397,29 +690,26 @@
 
 tagnames=${tagnames+${tagnames},}F77
 
+exec 7<&0 </dev/null 6>&1
+
 # Name of the host.
 # hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
 # so uname gets run too.
 ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
 
-exec 6>&1
-
 #
 # Initializations.
 #
 ac_default_prefix=/usr/local
+ac_clean_files=
 ac_config_libobj_dir=.
+LIBOBJS=
 cross_compiling=no
 subdirs=
 MFLAGS=
 MAKEFLAGS=
 SHELL=${CONFIG_SHELL-/bin/sh}
 
-# Maximum number of lines to put in a shell here document.
-# This variable seems obsolete.  It should probably be removed, and
-# only ac_max_sed_lines should be used.
-: ${ac_max_here_lines=38}
-
 # Identity of this package.
 PACKAGE_NAME='xf86-video-nv'
 PACKAGE_TARNAME='xf86-video-nv'
@@ -456,17 +746,155 @@
 #endif
 #if HAVE_INTTYPES_H
 # include <inttypes.h>
-#else
-# if HAVE_STDINT_H
-#  include <stdint.h>
-# endif
+#endif
+#if HAVE_STDINT_H
+# include <stdint.h>
 #endif
 #if HAVE_UNISTD_H
 # include <unistd.h>
 #endif"
 
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM mkdir_p AWK SET_MAKE am__leading_dot AMTAR am__tar am__untar MAINTAINER_MODE_TRUE MAINTAINER_MODE_FALSE MAINT build build_cpu build_vendor build_os host host_cpu host_vendor host_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE EGREP LN_S ECHO AR ac_ct_AR RANLIB ac_ct_RANLIB CPP CXX CXXFLAGS ac_ct_CXX CXXDEPMODE am__fastdepCXX_TRUE am__fastdepCXX_FALSE CXXCPP F77 FFLAGS ac_ct_F77 LIBTOOL PKG_CONFIG ac_pt_PKG_CONFIG XORG_CFLAGS XORG_LIBS moduledir DRIVER_NAME APP_MAN_SUFFIX LIB_MAN_SUFFIX FILE_MAN_SUFFIX MISC_MAN_SUFFIX DRIVER_MAN_SUFFIX ADMIN_MAN_SUFFIX APP_MAN_DIR LIB_MAN_DIR FILE_MAN_DIR MISC_MAN_DIR DRIVER_MAN_DIR ADMIN_MAN_DIR LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL
+PATH_SEPARATOR
+PACKAGE_NAME
+PACKAGE_TARNAME
+PACKAGE_VERSION
+PACKAGE_STRING
+PACKAGE_BUGREPORT
+exec_prefix
+prefix
+program_transform_name
+bindir
+sbindir
+libexecdir
+datarootdir
+datadir
+sysconfdir
+sharedstatedir
+localstatedir
+includedir
+oldincludedir
+docdir
+infodir
+htmldir
+dvidir
+pdfdir
+psdir
+libdir
+localedir
+mandir
+DEFS
+ECHO_C
+ECHO_N
+ECHO_T
+LIBS
+build_alias
+host_alias
+target_alias
+INSTALL_PROGRAM
+INSTALL_SCRIPT
+INSTALL_DATA
+CYGPATH_W
+PACKAGE
+VERSION
+ACLOCAL
+AUTOCONF
+AUTOMAKE
+AUTOHEADER
+MAKEINFO
+install_sh
+STRIP
+INSTALL_STRIP_PROGRAM
+mkdir_p
+AWK
+SET_MAKE
+am__leading_dot
+AMTAR
+am__tar
+am__untar
+MAINTAINER_MODE_TRUE
+MAINTAINER_MODE_FALSE
+MAINT
+build
+build_cpu
+build_vendor
+build_os
+host
+host_cpu
+host_vendor
+host_os
+CC
+CFLAGS
+LDFLAGS
+CPPFLAGS
+ac_ct_CC
+EXEEXT
+OBJEXT
+DEPDIR
+am__include
+am__quote
+AMDEP_TRUE
+AMDEP_FALSE
+AMDEPBACKSLASH
+CCDEPMODE
+am__fastdepCC_TRUE
+am__fastdepCC_FALSE
+GREP
+EGREP
+LN_S
+ECHO
+AR
+RANLIB
+CPP
+CXX
+CXXFLAGS
+ac_ct_CXX
+CXXDEPMODE
+am__fastdepCXX_TRUE
+am__fastdepCXX_FALSE
+CXXCPP
+F77
+FFLAGS
+ac_ct_F77
+LIBTOOL
+PKG_CONFIG
+XORG_CFLAGS
+XORG_LIBS
+moduledir
+DRIVER_NAME
+APP_MAN_SUFFIX
+LIB_MAN_SUFFIX
+FILE_MAN_SUFFIX
+MISC_MAN_SUFFIX
+DRIVER_MAN_SUFFIX
+ADMIN_MAN_SUFFIX
+APP_MAN_DIR
+LIB_MAN_DIR
+FILE_MAN_DIR
+MISC_MAN_DIR
+DRIVER_MAN_DIR
+ADMIN_MAN_DIR
+LIBOBJS
+LTLIBOBJS'
 ac_subst_files=''
+      ac_precious_vars='build_alias
+host_alias
+target_alias
+CC
+CFLAGS
+LDFLAGS
+CPPFLAGS
+CPP
+CXX
+CXXFLAGS
+CCC
+CXXCPP
+F77
+FFLAGS
+PKG_CONFIG
+XORG_CFLAGS
+XORG_LIBS'
+
 
 # Initialize some variables set by options.
 ac_init_help=
@@ -493,34 +921,48 @@
 # and all the variables that are supposed to be based on exec_prefix
 # by default will actually change.
 # Use braces instead of parens because sh, perl, etc. also accept them.
+# (The list follows the same order as the GNU Coding Standards.)
 bindir='${exec_prefix}/bin'
 sbindir='${exec_prefix}/sbin'
 libexecdir='${exec_prefix}/libexec'
-datadir='${prefix}/share'
+datarootdir='${prefix}/share'
+datadir='${datarootdir}'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
-libdir='${exec_prefix}/lib'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
-infodir='${prefix}/info'
-mandir='${prefix}/man'
+docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
+infodir='${datarootdir}/info'
+htmldir='${docdir}'
+dvidir='${docdir}'
+pdfdir='${docdir}'
+psdir='${docdir}'
+libdir='${exec_prefix}/lib'
+localedir='${datarootdir}/locale'
+mandir='${datarootdir}/man'
 
 ac_prev=
+ac_dashdash=
 for ac_option
 do
   # If the previous option needs an argument, assign it.
   if test -n "$ac_prev"; then
-    eval "$ac_prev=\$ac_option"
+    eval $ac_prev=\$ac_option
     ac_prev=
     continue
   fi
 
-  ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'`
+  case $ac_option in
+  *=*)	ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
+  *)	ac_optarg=yes ;;
+  esac
 
   # Accept the important Cygnus configure options, so we can diagnose typos.
 
-  case $ac_option in
+  case $ac_dashdash$ac_option in
+  --)
+    ac_dashdash=yes ;;
 
   -bindir | --bindir | --bindi | --bind | --bin | --bi)
     ac_prev=bindir ;;
@@ -542,12 +984,18 @@
   --config-cache | -C)
     cache_file=config.cache ;;
 
-  -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+  -datadir | --datadir | --datadi | --datad)
     ac_prev=datadir ;;
-  -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
-  | --da=*)
+  -datadir=* | --datadir=* | --datadi=* | --datad=*)
     datadir=$ac_optarg ;;
 
+  -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
+  | --dataroo | --dataro | --datar)
+    ac_prev=datarootdir ;;
+  -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
+  | --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
+    datarootdir=$ac_optarg ;;
+
   -disable-* | --disable-*)
     ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
     # Reject names that are not valid shell variable names.
@@ -555,7 +1003,17 @@
       { echo "$as_me: error: invalid feature name: $ac_feature" >&2
    { (exit 1); exit 1; }; }
     ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    eval "enable_$ac_feature=no" ;;
+    eval enable_$ac_feature=no ;;
+
+  -docdir | --docdir | --docdi | --doc | --do)
+    ac_prev=docdir ;;
+  -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
+    docdir=$ac_optarg ;;
+
+  -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
+    ac_prev=dvidir ;;
+  -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
+    dvidir=$ac_optarg ;;
 
   -enable-* | --enable-*)
     ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
@@ -564,11 +1022,7 @@
       { echo "$as_me: error: invalid feature name: $ac_feature" >&2
    { (exit 1); exit 1; }; }
     ac_feature=`echo $ac_feature | sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "enable_$ac_feature='$ac_optarg'" ;;
+    eval enable_$ac_feature=\$ac_optarg ;;
 
   -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
   | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
@@ -595,6 +1049,12 @@
   -host=* | --host=* | --hos=* | --ho=*)
     host_alias=$ac_optarg ;;
 
+  -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
+    ac_prev=htmldir ;;
+  -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
+  | --ht=*)
+    htmldir=$ac_optarg ;;
+
   -includedir | --includedir | --includedi | --included | --include \
   | --includ | --inclu | --incl | --inc)
     ac_prev=includedir ;;
@@ -619,13 +1079,16 @@
   | --libexe=* | --libex=* | --libe=*)
     libexecdir=$ac_optarg ;;
 
+  -localedir | --localedir | --localedi | --localed | --locale)
+    ac_prev=localedir ;;
+  -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
+    localedir=$ac_optarg ;;
+
   -localstatedir | --localstatedir | --localstatedi | --localstated \
-  | --localstate | --localstat | --localsta | --localst \
-  | --locals | --local | --loca | --loc | --lo)
+  | --localstate | --localstat | --localsta | --localst | --locals)
     ac_prev=localstatedir ;;
   -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
-  | --localstate=* | --localstat=* | --localsta=* | --localst=* \
-  | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+  | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
     localstatedir=$ac_optarg ;;
 
   -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
@@ -690,6 +1153,16 @@
   | --progr-tra=* | --program-tr=* | --program-t=*)
     program_transform_name=$ac_optarg ;;
 
+  -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
+    ac_prev=pdfdir ;;
+  -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
+    pdfdir=$ac_optarg ;;
+
+  -psdir | --psdir | --psdi | --psd | --ps)
+    ac_prev=psdir ;;
+  -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
+    psdir=$ac_optarg ;;
+
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
@@ -746,11 +1219,7 @@
       { echo "$as_me: error: invalid package name: $ac_package" >&2
    { (exit 1); exit 1; }; }
     ac_package=`echo $ac_package| sed 's/-/_/g'`
-    case $ac_option in
-      *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;;
-      *) ac_optarg=yes ;;
-    esac
-    eval "with_$ac_package='$ac_optarg'" ;;
+    eval with_$ac_package=\$ac_optarg ;;
 
   -without-* | --without-*)
     ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
@@ -759,7 +1228,7 @@
       { echo "$as_me: error: invalid package name: $ac_package" >&2
    { (exit 1); exit 1; }; }
     ac_package=`echo $ac_package | sed 's/-/_/g'`
-    eval "with_$ac_package=no" ;;
+    eval with_$ac_package=no ;;
 
   --x)
     # Obsolete; use --with-x.
@@ -790,8 +1259,7 @@
     expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
       { echo "$as_me: error: invalid variable name: $ac_envvar" >&2
    { (exit 1); exit 1; }; }
-    ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`
-    eval "$ac_envvar='$ac_optarg'"
+    eval $ac_envvar=\$ac_optarg
     export $ac_envvar ;;
 
   *)
@@ -811,27 +1279,19 @@
    { (exit 1); exit 1; }; }
 fi
 
-# Be sure to have absolute paths.
-for ac_var in exec_prefix prefix
-do
-  eval ac_val=$`echo $ac_var`
-  case $ac_val in
-    [\\/$]* | ?:[\\/]* | NONE | '' ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
-  esac
-done
-
-# Be sure to have absolute paths.
-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \
-	      localstatedir libdir includedir oldincludedir infodir mandir
+# Be sure to have absolute directory names.
+for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
+		datadir sysconfdir sharedstatedir localstatedir includedir \
+		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
+		libdir localedir mandir
 do
-  eval ac_val=$`echo $ac_var`
+  eval ac_val=\$$ac_var
   case $ac_val in
-    [\\/$]* | ?:[\\/]* ) ;;
-    *)  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
-   { (exit 1); exit 1; }; };;
+    [\\/$]* | ?:[\\/]* )  continue;;
+    NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
   esac
+  { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
+   { (exit 1); exit 1; }; }
 done
 
 # There might be people who depend on the old broken behavior: `$host'
@@ -858,22 +1318,43 @@
 test "$silent" = yes && exec 6>/dev/null
 
 
+ac_pwd=`pwd` && test -n "$ac_pwd" &&
+ac_ls_di=`ls -di .` &&
+ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
+  { echo "$as_me: error: Working directory cannot be determined" >&2
+   { (exit 1); exit 1; }; }
+test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
+  { echo "$as_me: error: pwd does not report name of working directory" >&2
+   { (exit 1); exit 1; }; }
+
+
 # Find the source files, if location was not specified.
 if test -z "$srcdir"; then
   ac_srcdir_defaulted=yes
-  # Try the directory containing this script, then its parent.
-  ac_confdir=`(dirname "$0") 2>/dev/null ||
+  # Try the directory containing this script, then the parent directory.
+  ac_confdir=`$as_dirname -- "$0" ||
 $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$0" : 'X\(//\)[^/]' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$0" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   srcdir=$ac_confdir
   if test ! -r "$srcdir/$ac_unique_file"; then
     srcdir=..
@@ -882,82 +1363,31 @@
   ac_srcdir_defaulted=no
 fi
 if test ! -r "$srcdir/$ac_unique_file"; then
-  if test "$ac_srcdir_defaulted" = yes; then
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2
+  test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
+  { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
    { (exit 1); exit 1; }; }
-  else
-    { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
-   { (exit 1); exit 1; }; }
-  fi
 fi
-(cd $srcdir && test -r "./$ac_unique_file") 2>/dev/null ||
-  { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2
+ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
+ac_abs_confdir=`(
+	cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
    { (exit 1); exit 1; }; }
-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'`
-ac_env_build_alias_set=${build_alias+set}
-ac_env_build_alias_value=$build_alias
-ac_cv_env_build_alias_set=${build_alias+set}
-ac_cv_env_build_alias_value=$build_alias
-ac_env_host_alias_set=${host_alias+set}
-ac_env_host_alias_value=$host_alias
-ac_cv_env_host_alias_set=${host_alias+set}
-ac_cv_env_host_alias_value=$host_alias
-ac_env_target_alias_set=${target_alias+set}
-ac_env_target_alias_value=$target_alias
-ac_cv_env_target_alias_set=${target_alias+set}
-ac_cv_env_target_alias_value=$target_alias
-ac_env_CC_set=${CC+set}
-ac_env_CC_value=$CC
-ac_cv_env_CC_set=${CC+set}
-ac_cv_env_CC_value=$CC
-ac_env_CFLAGS_set=${CFLAGS+set}
-ac_env_CFLAGS_value=$CFLAGS
-ac_cv_env_CFLAGS_set=${CFLAGS+set}
-ac_cv_env_CFLAGS_value=$CFLAGS
-ac_env_LDFLAGS_set=${LDFLAGS+set}
-ac_env_LDFLAGS_value=$LDFLAGS
-ac_cv_env_LDFLAGS_set=${LDFLAGS+set}
-ac_cv_env_LDFLAGS_value=$LDFLAGS
-ac_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_env_CPPFLAGS_value=$CPPFLAGS
-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set}
-ac_cv_env_CPPFLAGS_value=$CPPFLAGS
-ac_env_CPP_set=${CPP+set}
-ac_env_CPP_value=$CPP
-ac_cv_env_CPP_set=${CPP+set}
-ac_cv_env_CPP_value=$CPP
-ac_env_CXX_set=${CXX+set}
-ac_env_CXX_value=$CXX
-ac_cv_env_CXX_set=${CXX+set}
-ac_cv_env_CXX_value=$CXX
-ac_env_CXXFLAGS_set=${CXXFLAGS+set}
-ac_env_CXXFLAGS_value=$CXXFLAGS
-ac_cv_env_CXXFLAGS_set=${CXXFLAGS+set}
-ac_cv_env_CXXFLAGS_value=$CXXFLAGS
-ac_env_CXXCPP_set=${CXXCPP+set}
-ac_env_CXXCPP_value=$CXXCPP
-ac_cv_env_CXXCPP_set=${CXXCPP+set}
-ac_cv_env_CXXCPP_value=$CXXCPP
-ac_env_F77_set=${F77+set}
-ac_env_F77_value=$F77
-ac_cv_env_F77_set=${F77+set}
-ac_cv_env_F77_value=$F77
-ac_env_FFLAGS_set=${FFLAGS+set}
-ac_env_FFLAGS_value=$FFLAGS
-ac_cv_env_FFLAGS_set=${FFLAGS+set}
-ac_cv_env_FFLAGS_value=$FFLAGS
-ac_env_PKG_CONFIG_set=${PKG_CONFIG+set}
-ac_env_PKG_CONFIG_value=$PKG_CONFIG
-ac_cv_env_PKG_CONFIG_set=${PKG_CONFIG+set}
-ac_cv_env_PKG_CONFIG_value=$PKG_CONFIG
-ac_env_XORG_CFLAGS_set=${XORG_CFLAGS+set}
-ac_env_XORG_CFLAGS_value=$XORG_CFLAGS
-ac_cv_env_XORG_CFLAGS_set=${XORG_CFLAGS+set}
-ac_cv_env_XORG_CFLAGS_value=$XORG_CFLAGS
-ac_env_XORG_LIBS_set=${XORG_LIBS+set}
-ac_env_XORG_LIBS_value=$XORG_LIBS
-ac_cv_env_XORG_LIBS_set=${XORG_LIBS+set}
-ac_cv_env_XORG_LIBS_value=$XORG_LIBS
+	pwd)`
+# When building in place, set srcdir=.
+if test "$ac_abs_confdir" = "$ac_pwd"; then
+  srcdir=.
+fi
+# Remove unnecessary trailing slashes from srcdir.
+# Double slashes in file names in object file debugging info
+# mess up M-x gdb in Emacs.
+case $srcdir in
+*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
+esac
+for ac_var in $ac_precious_vars; do
+  eval ac_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_env_${ac_var}_value=\$${ac_var}
+  eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
+  eval ac_cv_env_${ac_var}_value=\$${ac_var}
+done
 
 #
 # Report the --help message.
@@ -986,9 +1416,6 @@
   -n, --no-create         do not create output files
       --srcdir=DIR        find the sources in DIR [configure dir or \`..']
 
-_ACEOF
-
-  cat <<_ACEOF
 Installation directories:
   --prefix=PREFIX         install architecture-independent files in PREFIX
 			  [$ac_default_prefix]
@@ -1006,15 +1433,22 @@
   --bindir=DIR           user executables [EPREFIX/bin]
   --sbindir=DIR          system admin executables [EPREFIX/sbin]
   --libexecdir=DIR       program executables [EPREFIX/libexec]
-  --datadir=DIR          read-only architecture-independent data [PREFIX/share]
   --sysconfdir=DIR       read-only single-machine data [PREFIX/etc]
   --sharedstatedir=DIR   modifiable architecture-independent data [PREFIX/com]
   --localstatedir=DIR    modifiable single-machine data [PREFIX/var]
   --libdir=DIR           object code libraries [EPREFIX/lib]
   --includedir=DIR       C header files [PREFIX/include]
   --oldincludedir=DIR    C header files for non-gcc [/usr/include]
-  --infodir=DIR          info documentation [PREFIX/info]
-  --mandir=DIR           man documentation [PREFIX/man]
+  --datarootdir=DIR      read-only arch.-independent data root [PREFIX/share]
+  --datadir=DIR          read-only architecture-independent data [DATAROOTDIR]
+  --infodir=DIR          info documentation [DATAROOTDIR/info]
+  --localedir=DIR        locale-dependent data [DATAROOTDIR/locale]
+  --mandir=DIR           man documentation [DATAROOTDIR/man]
+  --docdir=DIR           documentation root [DATAROOTDIR/doc/xf86-video-nv]
+  --htmldir=DIR          html documentation [DOCDIR]
+  --dvidir=DIR           dvi documentation [DOCDIR]
+  --pdfdir=DIR           pdf documentation [DOCDIR]
+  --psdir=DIR            ps documentation [DOCDIR]
 _ACEOF
 
   cat <<\_ACEOF
@@ -1041,10 +1475,8 @@
   --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
   --enable-maintainer-mode  enable make rules and dependencies not useful
 			  (and sometimes confusing) to the casual installer
-  --enable-static[=PKGS]
-                          build static libraries [default=no]
-  --enable-shared[=PKGS]
-                          build shared libraries [default=yes]
+  --enable-static[=PKGS]  build static libraries [default=no]
+  --enable-shared[=PKGS]  build shared libraries [default=yes]
   --enable-fast-install[=PKGS]
                           optimize for fast installation [default=yes]
   --disable-dependency-tracking  speeds up one-time build
@@ -1057,8 +1489,7 @@
   --with-gnu-ld           assume the C compiler uses GNU ld [default=no]
   --with-pic              try to use only PIC/non-PIC objects [default=use
                           both]
-  --with-tags[=TAGS]
-                          include additional configurations [automatic]
+  --with-tags[=TAGS]      include additional configurations [automatic]
   --with-xorg-module-dir=DIR
                           Default xorg module directory
                           [default=$libdir/xorg/modules]
@@ -1070,8 +1501,8 @@
   CFLAGS      C compiler flags
   LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
               nonstandard directory <lib dir>
-  CPPFLAGS    C/C++ preprocessor flags, e.g. -I<include dir> if you have
-              headers in a nonstandard directory <include dir>
+  CPPFLAGS    C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
+              you have headers in a nonstandard directory <include dir>
   CPP         C preprocessor
   CXX         C++ compiler command
   CXXFLAGS    C++ compiler flags
@@ -1087,120 +1518,86 @@
 
 Report bugs to <https://bugs.freedesktop.org/enter_bug.cgi?product=xorg>.
 _ACEOF
+ac_status=$?
 fi
 
 if test "$ac_init_help" = "recursive"; then
   # If there are subdirs, report their specific --help.
-  ac_popdir=`pwd`
   for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
-    test -d $ac_dir || continue
+    test -d "$ac_dir" || continue
     ac_builddir=.
 
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
   ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
-
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-    cd $ac_dir
-    # Check for guested configure; otherwise get Cygnus style configure.
-    if test -f $ac_srcdir/configure.gnu; then
-      echo
-      $SHELL $ac_srcdir/configure.gnu  --help=recursive
-    elif test -f $ac_srcdir/configure; then
-      echo
-      $SHELL $ac_srcdir/configure  --help=recursive
-    elif test -f $ac_srcdir/configure.ac ||
-	   test -f $ac_srcdir/configure.in; then
-      echo
-      $ac_configure --help
+    cd "$ac_dir" || { ac_status=$?; continue; }
+    # Check for guested configure.
+    if test -f "$ac_srcdir/configure.gnu"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure.gnu" --help=recursive
+    elif test -f "$ac_srcdir/configure"; then
+      echo &&
+      $SHELL "$ac_srcdir/configure" --help=recursive
     else
       echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
-    fi
-    cd $ac_popdir
+    fi || ac_status=$?
+    cd "$ac_pwd" || { ac_status=$?; break; }
   done
 fi
 
-test -n "$ac_init_help" && exit 0
+test -n "$ac_init_help" && exit $ac_status
 if $ac_init_version; then
   cat <<\_ACEOF
 xf86-video-nv configure 1.2.0
-generated by GNU Autoconf 2.59
+generated by GNU Autoconf 2.60
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
+2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
 This configure script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it.
 _ACEOF
-  exit 0
+  exit
 fi
-exec 5>config.log
-cat >&5 <<_ACEOF
+cat >config.log <<_ACEOF
 This file contains any messages produced by compilers while
 running configure, to aid debugging if configure makes a mistake.
 
 It was created by xf86-video-nv $as_me 1.2.0, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+generated by GNU Autoconf 2.60.  Invocation command line was
 
   $ $0 $@
 
 _ACEOF
+exec 5>>config.log
 {
 cat <<_ASUNAME
 ## --------- ##
@@ -1219,7 +1616,7 @@
 /bin/arch              = `(/bin/arch) 2>/dev/null              || echo unknown`
 /usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null       || echo unknown`
 /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
-hostinfo               = `(hostinfo) 2>/dev/null               || echo unknown`
+/usr/bin/hostinfo      = `(/usr/bin/hostinfo) 2>/dev/null      || echo unknown`
 /bin/machine           = `(/bin/machine) 2>/dev/null           || echo unknown`
 /usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null       || echo unknown`
 /bin/universe          = `(/bin/universe) 2>/dev/null          || echo unknown`
@@ -1233,6 +1630,7 @@
   test -z "$as_dir" && as_dir=.
   echo "PATH: $as_dir"
 done
+IFS=$as_save_IFS
 
 } >&5
 
@@ -1254,7 +1652,6 @@
 ac_configure_args=
 ac_configure_args0=
 ac_configure_args1=
-ac_sep=
 ac_must_keep_next=false
 for ac_pass in 1 2
 do
@@ -1265,7 +1662,7 @@
     -q | -quiet | --quiet | --quie | --qui | --qu | --q \
     | -silent | --silent | --silen | --sile | --sil)
       continue ;;
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
+    *\'*)
       ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
     esac
     case $ac_pass in
@@ -1287,9 +1684,7 @@
 	  -* ) ac_must_keep_next=true ;;
 	esac
       fi
-      ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'"
-      # Get rid of the leading space.
-      ac_sep=" "
+      ac_configure_args="$ac_configure_args '$ac_arg'"
       ;;
     esac
   done
@@ -1300,8 +1695,8 @@
 # When interrupted or exit'd, cleanup temporary files, and complete
 # config.log.  We remove comments because anyway the quotes in there
 # would cause problems or look ugly.
-# WARNING: Be sure not to use single quotes in there, as some shells,
-# such as our DU 5.0 friend, will then `close' the trap.
+# WARNING: Use '\'' to represent an apostrophe within the trap.
+# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
 trap 'exit_status=$?
   # Save into config.log some information that might help in debugging.
   {
@@ -1314,20 +1709,34 @@
 _ASBOX
     echo
     # The following way of writing the cache mishandles newlines in values,
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
   (set) 2>&1 |
-    case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
+    case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
       sed -n \
-	"s/'"'"'/'"'"'\\\\'"'"''"'"'/g;
-	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p"
-      ;;
+	"s/'\''/'\''\\\\'\'''\''/g;
+	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
+      ;; #(
     *)
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-}
+    esac |
+    sort
+)
     echo
 
     cat <<\_ASBOX
@@ -1338,22 +1747,28 @@
     echo
     for ac_var in $ac_subst_vars
     do
-      eval ac_val=$`echo $ac_var`
-      echo "$ac_var='"'"'$ac_val'"'"'"
+      eval ac_val=\$$ac_var
+      case $ac_val in
+      *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+      esac
+      echo "$ac_var='\''$ac_val'\''"
     done | sort
     echo
 
     if test -n "$ac_subst_files"; then
       cat <<\_ASBOX
-## ------------- ##
-## Output files. ##
-## ------------- ##
+## ------------------- ##
+## File substitutions. ##
+## ------------------- ##
 _ASBOX
       echo
       for ac_var in $ac_subst_files
       do
-	eval ac_val=$`echo $ac_var`
-	echo "$ac_var='"'"'$ac_val'"'"'"
+	eval ac_val=\$$ac_var
+	case $ac_val in
+	*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
+	esac
+	echo "$ac_var='\''$ac_val'\''"
       done | sort
       echo
     fi
@@ -1365,26 +1780,24 @@
 ## ----------- ##
 _ASBOX
       echo
-      sed "/^$/d" confdefs.h | sort
+      cat confdefs.h
       echo
     fi
     test "$ac_signal" != 0 &&
       echo "$as_me: caught signal $ac_signal"
     echo "$as_me: exit $exit_status"
   } >&5
-  rm -f core *.core &&
-  rm -rf conftest* confdefs* conf$$* $ac_clean_files &&
+  rm -f core *.core core.conftest.* &&
+    rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
     exit $exit_status
-     ' 0
+' 0
 for ac_signal in 1 2 13 15; do
   trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
 done
 ac_signal=0
 
 # confdefs.h avoids OS command line length limits that DEFS can exceed.
-rm -rf conftest* confdefs.h
-# AIX cpp loses on an empty file, so make sure it contains at least a newline.
-echo >confdefs.h
+rm -f -r conftest* confdefs.h
 
 # Predefined preprocessor variables.
 
@@ -1415,14 +1828,17 @@
 
 # Let the site file select an alternate cache file if it wants to.
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-  fi
+if test -n "$CONFIG_SITE"; then
+  set x "$CONFIG_SITE"
+elif test "x$prefix" != xNONE; then
+  set x "$prefix/share/config.site" "$prefix/etc/config.site"
+else
+  set x "$ac_default_prefix/share/config.site" \
+	"$ac_default_prefix/etc/config.site"
 fi
-for ac_site_file in $CONFIG_SITE; do
+shift
+for ac_site_file
+do
   if test -r "$ac_site_file"; then
     { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5
 echo "$as_me: loading site script $ac_site_file" >&6;}
@@ -1438,8 +1854,8 @@
     { echo "$as_me:$LINENO: loading cache $cache_file" >&5
 echo "$as_me: loading cache $cache_file" >&6;}
     case $cache_file in
-      [\\/]* | ?:[\\/]* ) . $cache_file;;
-      *)                      . ./$cache_file;;
+      [\\/]* | ?:[\\/]* ) . "$cache_file";;
+      *)                      . "./$cache_file";;
     esac
   fi
 else
@@ -1451,12 +1867,11 @@
 # Check that the precious variables saved in the cache have kept the same
 # value.
 ac_cache_corrupted=false
-for ac_var in `(set) 2>&1 |
-	       sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do
+for ac_var in $ac_precious_vars; do
   eval ac_old_set=\$ac_cv_env_${ac_var}_set
   eval ac_new_set=\$ac_env_${ac_var}_set
-  eval ac_old_val="\$ac_cv_env_${ac_var}_value"
-  eval ac_new_val="\$ac_env_${ac_var}_value"
+  eval ac_old_val=\$ac_cv_env_${ac_var}_value
+  eval ac_new_val=\$ac_env_${ac_var}_value
   case $ac_old_set,$ac_new_set in
     set,)
       { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
@@ -1481,8 +1896,7 @@
   # Pass precious variables to config.status.
   if test "$ac_new_set" = set; then
     case $ac_new_val in
-    *" "*|*"	"*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*)
-      ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
+    *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
     *) ac_arg=$ac_var=$ac_new_val ;;
     esac
     case " $ac_configure_args " in
@@ -1499,12 +1913,6 @@
    { (exit 1); exit 1; }; }
 fi
 
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
 
 
 
@@ -1529,6 +1937,11 @@
 
 
 
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
@@ -1549,32 +1962,38 @@
 
 
 
-          ac_config_headers="$ac_config_headers config.h"
+ac_config_headers="$ac_config_headers config.h"
 
 ac_aux_dir=
-for ac_dir in . $srcdir/.; do
-  if test -f $ac_dir/install-sh; then
+for ac_dir in . "$srcdir"/.; do
+  if test -f "$ac_dir/install-sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
     break
-  elif test -f $ac_dir/install.sh; then
+  elif test -f "$ac_dir/install.sh"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install.sh -c"
     break
-  elif test -f $ac_dir/shtool; then
+  elif test -f "$ac_dir/shtool"; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/shtool install -c"
     break
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in . $srcdir/." >&5
-echo "$as_me: error: cannot find install-sh or install.sh in . $srcdir/." >&2;}
+  { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in . \"$srcdir\"/." >&5
+echo "$as_me: error: cannot find install-sh or install.sh in . \"$srcdir\"/." >&2;}
    { (exit 1); exit 1; }; }
 fi
-ac_config_guess="$SHELL $ac_aux_dir/config.guess"
-ac_config_sub="$SHELL $ac_aux_dir/config.sub"
-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure.
+
+# These three variables are undocumented and unsupported,
+# and are intended to be withdrawn in a future Autoconf release.
+# They can cause serious problems if a builder's source tree is in a directory
+# whose full name contains unusual characters.
+ac_config_guess="$SHELL $ac_aux_dir/config.guess"  # Please don't use this var.
+ac_config_sub="$SHELL $ac_aux_dir/config.sub"  # Please don't use this var.
+ac_configure="$SHELL $ac_aux_dir/configure"  # Please don't use this var.
+
 
 
 am__api_version="1.9"
@@ -1591,8 +2010,8 @@
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # OS/2's system install, which has a completely different semantic
 # ./install, which can be erroneously created by make from ./install.sh.
-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5
+echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
 if test -z "$INSTALL"; then
 if test "${ac_cv_path_install+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -1614,7 +2033,7 @@
     # by default.
     for ac_prog in ginstall scoinst install; do
       for ac_exec_ext in '' $ac_executable_extensions; do
-	if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then
+	if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; }; then
 	  if test $ac_prog = install &&
 	    grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
 	    # AIX install.  It has an incompatible calling convention.
@@ -1633,21 +2052,22 @@
     ;;
 esac
 done
+IFS=$as_save_IFS
 
 
 fi
   if test "${ac_cv_path_install+set}" = set; then
     INSTALL=$ac_cv_path_install
   else
-    # As a last resort, use the slow shell script.  We don't cache a
-    # path for INSTALL within a source directory, because that will
+    # As a last resort, use the slow shell script.  Don't cache a
+    # value for INSTALL within a source directory, because that will
     # break other packages using the cache if that directory is
-    # removed, or if the path is relative.
+    # removed, or if the value is a relative name.
     INSTALL=$ac_install_sh
   fi
 fi
-echo "$as_me:$LINENO: result: $INSTALL" >&5
-echo "${ECHO_T}$INSTALL" >&6
+{ echo "$as_me:$LINENO: result: $INSTALL" >&5
+echo "${ECHO_T}$INSTALL" >&6; }
 
 # Use test -z because SunOS4 sh mishandles braces in ${var-val}.
 # It thinks the first close brace ends the variable substitution.
@@ -1657,8 +2077,8 @@
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
-echo "$as_me:$LINENO: checking whether build environment is sane" >&5
-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5
+echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
 # Just in case
 sleep 1
 echo timestamp > conftest.file
@@ -1700,20 +2120,20 @@
 Check your system clock" >&2;}
    { (exit 1); exit 1; }; }
 fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 test "$program_prefix" != NONE &&
-  program_transform_name="s,^,$program_prefix,;$program_transform_name"
+  program_transform_name="s&^&$program_prefix&;$program_transform_name"
 # Use a double $ so make ignores it.
 test "$program_suffix" != NONE &&
-  program_transform_name="s,\$,$program_suffix,;$program_transform_name"
+  program_transform_name="s&\$&$program_suffix&;$program_transform_name"
 # Double any \ or $.  echo might interpret backslashes.
 # By default was `s,x,x', remove it if useless.
 cat <<\_ACEOF >conftest.sed
 s/[\\$]/&&/g;s/;s,x,x,$//
 _ACEOF
 program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
-rm conftest.sed
+rm -f conftest.sed
 
 # expand $ac_aux_dir to an absolute path
 am_aux_dir=`cd $ac_aux_dir && pwd`
@@ -1765,8 +2185,8 @@
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_AWK+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -1779,54 +2199,57 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AWK="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AWK=$ac_cv_prog_AWK
 if test -n "$AWK"; then
-  echo "$as_me:$LINENO: result: $AWK" >&5
-echo "${ECHO_T}$AWK" >&6
+  { echo "$as_me:$LINENO: result: $AWK" >&5
+echo "${ECHO_T}$AWK" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -n "$AWK" && break
 done
 
-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6
-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'`
-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5
+echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
+set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
+if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.make <<\_ACEOF
+SHELL = /bin/sh
 all:
-	@echo 'ac_maketemp="$(MAKE)"'
+	@echo '@@@%%%=$(MAKE)=@@@%%%'
 _ACEOF
 # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=`
-if test -n "$ac_maketemp"; then
-  eval ac_cv_prog_make_${ac_make}_set=yes
-else
-  eval ac_cv_prog_make_${ac_make}_set=no
-fi
+case `${MAKE-make} -f conftest.make 2>/dev/null` in
+  *@@@%%%=?*=@@@%%%*)
+    eval ac_cv_prog_make_${ac_make}_set=yes;;
+  *)
+    eval ac_cv_prog_make_${ac_make}_set=no;;
+esac
 rm -f conftest.make
 fi
-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
+  { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
   SET_MAKE=
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
   SET_MAKE="MAKE=${MAKE-make}"
 fi
 
@@ -1897,8 +2320,8 @@
   if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -1911,32 +2334,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 STRIP=$ac_cv_prog_STRIP
 if test -n "$STRIP"; then
-  echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
+  { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_STRIP"; then
   ac_ct_STRIP=$STRIP
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -1949,27 +2374,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_STRIP="strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
 fi
 fi
 ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
 if test -n "$ac_ct_STRIP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  STRIP=$ac_ct_STRIP
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
 else
   STRIP="$ac_cv_prog_STRIP"
 fi
@@ -1990,17 +2429,17 @@
 
 
 
-echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
-echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6
-    # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+{ echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo $ECHO_N "checking whether to enable maintainer-specific portions of Makefiles... $ECHO_C" >&6; }
+    # Check whether --enable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
-  enableval="$enable_maintainer_mode"
-  USE_MAINTAINER_MODE=$enableval
+  enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
 else
   USE_MAINTAINER_MODE=no
-fi;
-  echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
-echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6
+fi
+
+  { echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5
+echo "${ECHO_T}$USE_MAINTAINER_MODE" >&6; }
 
 
 if test $USE_MAINTAINER_MODE = yes; then
@@ -2016,10 +2455,9 @@
 
 
 # Checks for programs.
-# Check whether --enable-static or --disable-static was given.
+# Check whether --enable-static was given.
 if test "${enable_static+set}" = set; then
-  enableval="$enable_static"
-  p=${PACKAGE-default}
+  enableval=$enable_static; p=${PACKAGE-default}
     case $enableval in
     yes) enable_static=yes ;;
     no) enable_static=no ;;
@@ -2038,13 +2476,13 @@
     esac
 else
   enable_static=no
-fi;
+fi
 
 
-# Check whether --enable-shared or --disable-shared was given.
+
+# Check whether --enable-shared was given.
 if test "${enable_shared+set}" = set; then
-  enableval="$enable_shared"
-  p=${PACKAGE-default}
+  enableval=$enable_shared; p=${PACKAGE-default}
     case $enableval in
     yes) enable_shared=yes ;;
     no) enable_shared=no ;;
@@ -2063,12 +2501,12 @@
     esac
 else
   enable_shared=yes
-fi;
+fi
 
-# Check whether --enable-fast-install or --disable-fast-install was given.
+
+# Check whether --enable-fast-install was given.
 if test "${enable_fast_install+set}" = set; then
-  enableval="$enable_fast_install"
-  p=${PACKAGE-default}
+  enableval=$enable_fast_install; p=${PACKAGE-default}
     case $enableval in
     yes) enable_fast_install=yes ;;
     no) enable_fast_install=no ;;
@@ -2087,65 +2525,95 @@
     esac
 else
   enable_fast_install=yes
-fi;
+fi
+
 
 # Make sure we can run config.sub.
-$ac_config_sub sun4 >/dev/null 2>&1 ||
-  { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5
-echo "$as_me: error: cannot run $ac_config_sub" >&2;}
+$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
+  { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
+echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
    { (exit 1); exit 1; }; }
 
-echo "$as_me:$LINENO: checking build system type" >&5
-echo $ECHO_N "checking build system type... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking build system type" >&5
+echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
 if test "${ac_cv_build+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_cv_build_alias=$build_alias
-test -z "$ac_cv_build_alias" &&
-  ac_cv_build_alias=`$ac_config_guess`
-test -z "$ac_cv_build_alias" &&
+  ac_build_alias=$build_alias
+test "x$ac_build_alias" = x &&
+  ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
+test "x$ac_build_alias" = x &&
   { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5
 echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
    { (exit 1); exit 1; }; }
-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;}
+ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
+  { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
    { (exit 1); exit 1; }; }
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_build" >&5
-echo "${ECHO_T}$ac_cv_build" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5
+echo "${ECHO_T}$ac_cv_build" >&6; }
+case $ac_cv_build in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5
+echo "$as_me: error: invalid value of canonical build" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
 build=$ac_cv_build
-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_build
+shift
+build_cpu=$1
+build_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+build_os=$*
+IFS=$ac_save_IFS
+case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
 
 
-echo "$as_me:$LINENO: checking host system type" >&5
-echo $ECHO_N "checking host system type... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking host system type" >&5
+echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
 if test "${ac_cv_host+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_cv_host_alias=$host_alias
-test -z "$ac_cv_host_alias" &&
-  ac_cv_host_alias=$ac_cv_build_alias
-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` ||
-  { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5
-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;}
+  if test "x$host_alias" = x; then
+  ac_cv_host=$ac_cv_build
+else
+  ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
+    { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
+echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
    { (exit 1); exit 1; }; }
+fi
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_host" >&5
-echo "${ECHO_T}$ac_cv_host" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5
+echo "${ECHO_T}$ac_cv_host" >&6; }
+case $ac_cv_host in
+*-*-*) ;;
+*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5
+echo "$as_me: error: invalid value of canonical host" >&2;}
+   { (exit 1); exit 1; }; };;
+esac
 host=$ac_cv_host
-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+ac_save_IFS=$IFS; IFS='-'
+set x $ac_cv_host
+shift
+host_cpu=$1
+host_vendor=$2
+shift; shift
+# Remember, the first character of IFS is used to create $*,
+# except with old shells:
+host_os=$*
+IFS=$ac_save_IFS
+case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
 
 
 DEPDIR="${am__leading_dot}deps"
 
-          ac_config_commands="$ac_config_commands depfiles"
+ac_config_commands="$ac_config_commands depfiles"
 
 
 am_make=${MAKE-make}
@@ -2155,8 +2623,8 @@
 .PHONY: am__doit
 END
 # If we don't find an include directive, just comment out the code.
-echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
-echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5
+echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
 am__include="#"
 am__quote=
 _am_result=none
@@ -2183,15 +2651,15 @@
 fi
 
 
-echo "$as_me:$LINENO: result: $_am_result" >&5
-echo "${ECHO_T}$_am_result" >&6
+{ echo "$as_me:$LINENO: result: $_am_result" >&5
+echo "${ECHO_T}$_am_result" >&6; }
 rm -f confinc confmf
 
-# Check whether --enable-dependency-tracking or --disable-dependency-tracking was given.
+# Check whether --enable-dependency-tracking was given.
 if test "${enable_dependency_tracking+set}" = set; then
-  enableval="$enable_dependency_tracking"
+  enableval=$enable_dependency_tracking;
+fi
 
-fi;
 if test "x$enable_dependency_tracking" != xno; then
   am_depcomp="$ac_aux_dir/depcomp"
   AMDEPBACKSLASH='\'
@@ -2216,8 +2684,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2230,32 +2698,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_CC"; then
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2268,36 +2738,51 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 else
   CC="$ac_cv_prog_CC"
 fi
 
 if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2310,74 +2795,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
 
+  fi
 fi
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2391,7 +2836,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
@@ -2402,6 +2847,7 @@
   fi
 done
 done
+IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
   # We found a bogon in the path, so make sure we never use it.
@@ -2419,22 +2865,23 @@
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$CC"; then
   if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl
+  for ac_prog in cl.exe
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2447,36 +2894,38 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
     test -n "$CC" && break
   done
 fi
 if test -z "$CC"; then
   ac_ct_CC=$CC
-  for ac_prog in cl
+  for ac_prog in cl.exe
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2489,29 +2938,45 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -n "$ac_ct_CC" && break
 done
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 fi
 
 fi
@@ -2524,21 +2989,35 @@
    { (exit 1); exit 1; }; }
 
 # Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C compiler version" >&5
+echo "$as_me:$LINENO: checking for C compiler version" >&5
 ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler --version >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -v >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -V >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
@@ -2563,46 +3042,70 @@
 # Try to create an executable without -o first, disregard a.out.
 # It will help us diagnose broken compilers, and finding out an intuition
 # of exeext.
-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5
+echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
 ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5
-  (eval $ac_link_default) 2>&5
+#
+# List of possible output files, starting from the most likely.
+# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
+# only as a last resort.  b.out is created by i960 compilers.
+ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
+#
+# The IRIX 6 linker writes into existing files which may not be
+# executable, retaining their permissions.  Remove them first so a
+# subsequent execution test works.
+ac_rmfiles=
+for ac_file in $ac_files
+do
+  case $ac_file in
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
+    * ) ac_rmfiles="$ac_rmfiles $ac_file";;
+  esac
+done
+rm -f $ac_rmfiles
+
+if { (ac_try="$ac_link_default"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link_default") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-  # Find the output, starting from the most likely.  This scheme is
-# not robust to junk in `.', hence go to wildcards (a.*) only as a last
-# resort.
-
-# Be careful to initialize this variable, since it used to be cached.
-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile.
-ac_cv_exeext=
-# b.out is created by i960 compilers.
-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out
+  # Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
+# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
+# in a Makefile.  We should not override ac_cv_exeext if it was cached,
+# so that the user can short-circuit this test for compilers unknown to
+# Autoconf.
+for ac_file in $ac_files
 do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj )
-	;;
-    conftest.$ac_ext )
-	# This is the source file.
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
 	;;
     [ab].out )
 	# We found the default executable, but exeext='' is most
 	# certainly right.
 	break;;
     *.* )
-	ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	# FIXME: I believe we export ac_cv_exeext for Libtool,
-	# but it would be cool to find out if it's true.  Does anybody
-	# maintain Libtool? --akim.
-	export ac_cv_exeext
+        if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
+	then :; else
+	   ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
+	fi
+	# We set ac_cv_exeext here because the later test for it is not
+	# safe: cross compilers may not add the suffix if given an `-o'
+	# argument, so we may need to know it at that point already.
+	# Even if this section looks crufty: it has the advantage of
+	# actually working.
 	break;;
     * )
 	break;;
   esac
 done
+test "$ac_cv_exeext" = no && ac_cv_exeext=
+
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
@@ -2615,19 +3118,23 @@
 fi
 
 ac_exeext=$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_file" >&5
-echo "${ECHO_T}$ac_file" >&6
+{ echo "$as_me:$LINENO: result: $ac_file" >&5
+echo "${ECHO_T}$ac_file" >&6; }
 
-# Check the compiler produces executables we can run.  If not, either
+# Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether the C compiler works" >&5
-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5
+echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
 # FIXME: These cross compiler hacks should be removed for Autoconf 3.0
 # If not cross compiling, check that we can run a simple program.
 if test "$cross_compiling" != yes; then
   if { ac_try='./$ac_file'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -2646,22 +3153,27 @@
     fi
   fi
 fi
-echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 
 rm -f a.out a.exe conftest$ac_cv_exeext b.out
 ac_clean_files=$ac_clean_files_save
-# Check the compiler produces executables we can run.  If not, either
+# Check that the compiler produces executables we can run.  If not, either
 # the compiler is broken, or we cross compile.
-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $cross_compiling" >&5
-echo "${ECHO_T}$cross_compiling" >&6
-
-echo "$as_me:$LINENO: checking for suffix of executables" >&5
-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5
+echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
+{ echo "$as_me:$LINENO: result: $cross_compiling" >&5
+echo "${ECHO_T}$cross_compiling" >&6; }
+
+{ echo "$as_me:$LINENO: checking for suffix of executables" >&5
+echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
@@ -2672,9 +3184,8 @@
 for ac_file in conftest.exe conftest conftest.*; do
   test -f "$ac_file" || continue
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
     *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
-	  export ac_cv_exeext
 	  break;;
     * ) break;;
   esac
@@ -2688,14 +3199,14 @@
 fi
 
 rm -f conftest$ac_cv_exeext
-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
-echo "${ECHO_T}$ac_cv_exeext" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5
+echo "${ECHO_T}$ac_cv_exeext" >&6; }
 
 rm -f conftest.$ac_ext
 EXEEXT=$ac_cv_exeext
 ac_exeext=$EXEEXT
-echo "$as_me:$LINENO: checking for suffix of object files" >&5
-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for suffix of object files" >&5
+echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
 if test "${ac_cv_objext+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2715,14 +3226,20 @@
 }
 _ACEOF
 rm -f conftest.o conftest.obj
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>&5
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; then
-  for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do
+  for ac_file in conftest.o conftest.obj conftest.*; do
+  test -f "$ac_file" || continue;
   case $ac_file in
-    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;;
+    *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
     *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
        break;;
   esac
@@ -2740,12 +3257,12 @@
 
 rm -f conftest.$ac_cv_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
-echo "${ECHO_T}$ac_cv_objext" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5
+echo "${ECHO_T}$ac_cv_objext" >&6; }
 OBJEXT=$ac_cv_objext
 ac_objext=$OBJEXT
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
 if test "${ac_cv_c_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -2768,24 +3285,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -2794,24 +3323,28 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_compiler_gnu=no
+	ac_compiler_gnu=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
 GCC=`test $ac_compiler_gnu = yes && echo yes`
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
 if test "${ac_cv_prog_cc_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -2827,24 +3360,147 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	CFLAGS=""
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -2853,12 +3509,20 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_prog_cc_g=no
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
@@ -2874,12 +3538,12 @@
     CFLAGS=
   fi
 fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_cv_prog_cc_stdc=no
+  ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -2913,12 +3577,17 @@
 /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
    function prototypes and stuff, but not '\xHH' hex character constants.
    These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std1 is added to get
+   as 'x'.  The following induces an error, until -std is added to get
    proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
    array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std1.  */
+   that's true only with -std.  */
 int osf4_cc_array ['\x00' == 0 ? 1 : -1];
 
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
 int test (int i, double x);
 struct s1 {int (*f) (int a);};
 struct s2 {int (*f) (double a);};
@@ -2933,205 +3602,74 @@
   return 0;
 }
 _ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX			-qlanglvl=ansi
-# Ultrix and OSF/1	-std1
-# HP-UX 10.20 and later	-Ae
-# HP-UX older versions	-Aa -D_HPUX_SOURCE
-# SVR4			-Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
 do
   CC="$ac_save_CC $ac_arg"
   rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
-  ac_cv_prog_cc_stdc=$ac_arg
-break
+  ac_cv_prog_cc_c89=$ac_arg
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext
+
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
 done
-rm -f conftest.$ac_ext conftest.$ac_objext
+rm -f conftest.$ac_ext
 CC=$ac_save_CC
 
 fi
-
-case "x$ac_cv_prog_cc_stdc" in
-  x|xno)
-    echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6; } ;;
+  xno)
+    { echo "$as_me:$LINENO: result: unsupported" >&5
+echo "${ECHO_T}unsupported" >&6; } ;;
   *)
-    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-    CC="$CC $ac_cv_prog_cc_stdc" ;;
+    CC="$CC $ac_cv_prog_cc_c89"
+    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
 esac
 
-# Some people use a C++ compiler to compile C.  Since we use `exit',
-# in C++ we need to declare it.  In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
-  choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  for ac_declaration in \
-   '' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
-fi
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
 
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
@@ -3140,8 +3678,8 @@
 
 depcc="$CC"   am_compiler_list=
 
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
 if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3230,8 +3768,8 @@
 fi
 
 fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
 
@@ -3247,8 +3785,8 @@
 fi
 
 
-echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5
+echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
 if test "${lt_cv_path_SED+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3301,37 +3839,184 @@
 fi
 
 SED=$lt_cv_path_SED
-echo "$as_me:$LINENO: result: $SED" >&5
-echo "${ECHO_T}$SED" >&6
+{ echo "$as_me:$LINENO: result: $SED" >&5
+echo "${ECHO_T}$SED" >&6; }
+
+{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5
+echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
+if test "${ac_cv_path_GREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  # Extract the first word of "grep ggrep" to use in msg output
+if test -z "$GREP"; then
+set dummy grep ggrep; ac_prog_name=$2
+if test "${ac_cv_path_GREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  ac_path_GREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in grep ggrep; do
+  for ac_exec_ext in '' $ac_executable_extensions; do
+    ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
+    { test -f "$ac_path_GREP" && $as_executable_p "$ac_path_GREP"; } || continue
+    # Check for GNU ac_path_GREP and select it if it is found.
+  # Check for GNU $ac_path_GREP
+case `"$ac_path_GREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
+*)
+  ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    echo 'GREP' >> "conftest.nl"
+    "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_GREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_GREP="$ac_path_GREP"
+      ac_path_GREP_max=$ac_count
+    fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
 
-echo "$as_me:$LINENO: checking for egrep" >&5
-echo $ECHO_N "checking for egrep... $ECHO_C" >&6
-if test "${ac_cv_prog_egrep+set}" = set; then
+
+    $ac_path_GREP_found && break 3
+  done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+GREP="$ac_cv_path_GREP"
+if test -z "$GREP"; then
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+else
+  ac_cv_path_GREP=$GREP
+fi
+
+
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5
+echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
+ GREP="$ac_cv_path_GREP"
+
+
+{ echo "$as_me:$LINENO: checking for egrep" >&5
+echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
+if test "${ac_cv_path_EGREP+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
+else
+  if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
+   then ac_cv_path_EGREP="$GREP -E"
+   else
+     # Extract the first word of "egrep" to use in msg output
+if test -z "$EGREP"; then
+set dummy egrep; ac_prog_name=$2
+if test "${ac_cv_path_EGREP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  if echo a | (grep -E '(a|b)') >/dev/null 2>&1
-    then ac_cv_prog_egrep='grep -E'
-    else ac_cv_prog_egrep='egrep'
+  ac_path_EGREP_found=false
+# Loop through the user's path and test for each of PROGNAME-LIST
+as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  for ac_prog in egrep; do
+  for ac_exec_ext in '' $ac_executable_extensions; do
+    ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
+    { test -f "$ac_path_EGREP" && $as_executable_p "$ac_path_EGREP"; } || continue
+    # Check for GNU ac_path_EGREP and select it if it is found.
+  # Check for GNU $ac_path_EGREP
+case `"$ac_path_EGREP" --version 2>&1` in
+*GNU*)
+  ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
+*)
+  ac_count=0
+  echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
+  while :
+  do
+    cat "conftest.in" "conftest.in" >"conftest.tmp"
+    mv "conftest.tmp" "conftest.in"
+    cp "conftest.in" "conftest.nl"
+    echo 'EGREP' >> "conftest.nl"
+    "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
+    diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
+    ac_count=`expr $ac_count + 1`
+    if test $ac_count -gt ${ac_path_EGREP_max-0}; then
+      # Best one so far, save it but keep looking for a better one
+      ac_cv_path_EGREP="$ac_path_EGREP"
+      ac_path_EGREP_max=$ac_count
     fi
+    # 10*(2^10) chars as input seems more than enough
+    test $ac_count -gt 10 && break
+  done
+  rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
+esac
+
+
+    $ac_path_EGREP_found && break 3
+  done
+done
+
+done
+IFS=$as_save_IFS
+
+
+fi
+
+EGREP="$ac_cv_path_EGREP"
+if test -z "$EGREP"; then
+  { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
+echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
+   { (exit 1); exit 1; }; }
+fi
+
+else
+  ac_cv_path_EGREP=$EGREP
+fi
+
+
+   fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5
-echo "${ECHO_T}$ac_cv_prog_egrep" >&6
- EGREP=$ac_cv_prog_egrep
+{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5
+echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
+ EGREP="$ac_cv_path_EGREP"
 
 
 
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
+# Check whether --with-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
 else
   with_gnu_ld=no
-fi;
+fi
+
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
-  echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -3360,11 +4045,11 @@
     ;;
   esac
 elif test "$with_gnu_ld" = yes; then
-  echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
 else
-  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
 fi
 if test "${lt_cv_path_LD+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -3397,17 +4082,17 @@
 
 LD="$lt_cv_path_LD"
 if test -n "$LD"; then
-  echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6
+  { echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
 echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
    { (exit 1); exit 1; }; }
-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
 if test "${lt_cv_prog_gnu_ld+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3421,20 +4106,20 @@
   ;;
 esac
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
 with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5
+echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
 if test "${lt_cv_ld_reload_flag+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   lt_cv_ld_reload_flag='-r'
 fi
-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5
+echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
 reload_flag=$lt_cv_ld_reload_flag
 case $reload_flag in
 "" | " "*) ;;
@@ -3451,8 +4136,8 @@
     ;;
 esac
 
-echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5
+echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
 if test "${lt_cv_path_NM+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3500,23 +4185,23 @@
   test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
 fi
 fi
-echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
-echo "${ECHO_T}$lt_cv_path_NM" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5
+echo "${ECHO_T}$lt_cv_path_NM" >&6; }
 NM="$lt_cv_path_NM"
 
-echo "$as_me:$LINENO: checking whether ln -s works" >&5
-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether ln -s works" >&5
+echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
 LN_S=$as_ln_s
 if test "$LN_S" = "ln -s"; then
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+  { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 else
-  echo "$as_me:$LINENO: result: no, using $LN_S" >&5
-echo "${ECHO_T}no, using $LN_S" >&6
+  { echo "$as_me:$LINENO: result: no, using $LN_S" >&5
+echo "${ECHO_T}no, using $LN_S" >&6; }
 fi
 
-echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
-echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5
+echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6; }
 if test "${lt_cv_deplibs_check_method+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3566,7 +4251,7 @@
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-freebsd* | kfreebsd*-gnu | dragonfly*)
+freebsd* | dragonfly*)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     case $host_cpu in
     i*86 )
@@ -3620,11 +4305,11 @@
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   lt_cv_deplibs_check_method=pass_all
   ;;
 
-netbsd*)
+netbsd* | netbsdelf*-gnu)
   if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
     lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
   else
@@ -3691,8 +4376,8 @@
 esac
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5
+echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
 file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 test -z "$deplibs_check_method" && deplibs_check_method=unknown
@@ -3710,11 +4395,11 @@
 compiler=$CC
 
 
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+# Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
+  enableval=$enable_libtool_lock;
+fi
 
-fi;
 test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 # Some flags need to be propagated to the compiler or linker for good
@@ -3741,7 +4426,7 @@
   ;;
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 3744 "configure"' > conftest.$ac_ext
+  echo '#line 4429 "configure"' > conftest.$ac_ext
   if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
   (eval $ac_compile) 2>&5
   ac_status=$?
@@ -3826,8 +4511,8 @@
   # On SCO OpenServer 5, we need -belf to get full-featured binaries.
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
-  echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5
+echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
 if test "${lt_cv_cc_needs_belf+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -3853,24 +4538,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -3879,9 +4576,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-lt_cv_cc_needs_belf=no
+	lt_cv_cc_needs_belf=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
      ac_ext=c
 ac_cpp='$CPP $CPPFLAGS'
@@ -3890,8 +4588,8 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5
+echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
   if test x"$lt_cv_cc_needs_belf" != x"yes"; then
     # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
     CFLAGS="$SAVE_CFLAGS"
@@ -3928,8 +4626,8 @@
 ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5
+echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -3963,8 +4661,13 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
@@ -3989,9 +4692,10 @@
   # Broken: fails on valid input.
 continue
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether non-existent headers
+  # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -4001,8 +4705,13 @@
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
@@ -4029,6 +4738,7 @@
 ac_preproc_ok=:
 break
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
 done
@@ -4046,8 +4756,8 @@
 else
   ac_cv_prog_CPP=$CPP
 fi
-echo "$as_me:$LINENO: result: $CPP" >&5
-echo "${ECHO_T}$CPP" >&6
+{ echo "$as_me:$LINENO: result: $CPP" >&5
+echo "${ECHO_T}$CPP" >&6; }
 ac_preproc_ok=false
 for ac_c_preproc_warn_flag in '' yes
 do
@@ -4070,8 +4780,13 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
@@ -4096,9 +4811,10 @@
   # Broken: fails on valid input.
 continue
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether non-existent headers
+  # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -4108,8 +4824,13 @@
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
@@ -4136,6 +4857,7 @@
 ac_preproc_ok=:
 break
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
 done
@@ -4158,8 +4880,8 @@
 ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
 if test "${ac_cv_header_stdc+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4183,24 +4905,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -4209,9 +4943,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_header_stdc=no
+	ac_cv_header_stdc=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
@@ -4267,6 +5002,7 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 #include <ctype.h>
+#include <stdlib.h>
 #if ((' ' & 0x0FF) == 0x020)
 # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
 # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
@@ -4286,18 +5022,27 @@
   for (i = 0; i < 256; i++)
     if (XOR (islower (i), ISLOWER (i))
 	|| toupper (i) != TOUPPER (i))
-      exit(2);
-  exit (0);
+      return 2;
+  return 0;
 }
 _ACEOF
 rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -4310,12 +5055,14 @@
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
+
+
 fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
 if test $ac_cv_header_stdc = yes; then
 
 cat >>confdefs.h <<\_ACEOF
@@ -4338,9 +5085,9 @@
 		  inttypes.h stdint.h unistd.h
 do
 as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   cat >conftest.$ac_ext <<_ACEOF
@@ -4354,24 +5101,36 @@
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -4380,12 +5139,14 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-eval "$as_ac_Header=no"
+	eval "$as_ac_Header=no"
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 if test `eval echo '${'$as_ac_Header'}'` = yes; then
   cat >>confdefs.h <<_ACEOF
 #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
@@ -4400,18 +5161,19 @@
 for ac_header in dlfcn.h
 do
 as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
-  echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
+  { echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 else
   # Is the header compilable?
-echo "$as_me:$LINENO: checking $ac_header usability" >&5
-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking $ac_header usability" >&5
+echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -4422,24 +5184,36 @@
 #include <$ac_header>
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -4448,15 +5222,16 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_header_compiler=no
+	ac_header_compiler=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
-echo "${ECHO_T}$ac_header_compiler" >&6
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5
+echo "${ECHO_T}$ac_header_compiler" >&6; }
 
 # Is the header present?
-echo "$as_me:$LINENO: checking $ac_header presence" >&5
-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking $ac_header presence" >&5
+echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
@@ -4465,8 +5240,13 @@
 /* end confdefs.h.  */
 #include <$ac_header>
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
@@ -4490,9 +5270,10 @@
 
   ac_header_preproc=no
 fi
+
 rm -f conftest.err conftest.$ac_ext
-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
-echo "${ECHO_T}$ac_header_preproc" >&6
+{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5
+echo "${ECHO_T}$ac_header_preproc" >&6; }
 
 # So?  What about this header?
 case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
@@ -4516,25 +5297,24 @@
 echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
     { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
 echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
-    (
-      cat <<\_ASBOX
+    ( cat <<\_ASBOX
 ## ---------------------------------------------------------------------- ##
 ## Report this to https://bugs.freedesktop.org/enter_bug.cgi?product=xorg ##
 ## ---------------------------------------------------------------------- ##
 _ASBOX
-    ) |
-      sed "s/^/$as_me: WARNING:     /" >&2
+     ) | sed "s/^/$as_me: WARNING:     /" >&2
     ;;
 esac
-echo "$as_me:$LINENO: checking for $ac_header" >&5
-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6
-if eval "test \"\${$as_ac_Header+set}\" = set"; then
+{ echo "$as_me:$LINENO: checking for $ac_header" >&5
+echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
+if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
   eval "$as_ac_Header=\$ac_header_preproc"
 fi
-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5
-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6
+ac_res=`eval echo '${'$as_ac_Header'}'`
+	       { echo "$as_me:$LINENO: result: $ac_res" >&5
+echo "${ECHO_T}$ac_res" >&6; }
 
 fi
 if test `eval echo '${'$as_ac_Header'}'` = yes; then
@@ -4546,18 +5326,22 @@
 
 done
 
-ac_ext=cc
+ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-if test -n "$ac_tool_prefix"; then
-  for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+if test -z "$CXX"; then
+  if test -n "$CCC"; then
+    CXX=$CCC
+  else
+    if test -n "$ac_tool_prefix"; then
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CXX+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4570,36 +5354,38 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CXX=$ac_cv_prog_CXX
 if test -n "$CXX"; then
-  echo "$as_me:$LINENO: result: $CXX" >&5
-echo "${ECHO_T}$CXX" >&6
+  { echo "$as_me:$LINENO: result: $CXX" >&5
+echo "${ECHO_T}$CXX" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
     test -n "$CXX" && break
   done
 fi
 if test -z "$CXX"; then
   ac_ct_CXX=$CXX
-  for ac_prog in $CCC g++ c++ gpp aCC CC cxx cc++ cl FCC KCC RCC xlC_r xlC
+  for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4612,55 +5398,85 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CXX="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
 if test -n "$ac_ct_CXX"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
-echo "${ECHO_T}$ac_ct_CXX" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5
+echo "${ECHO_T}$ac_ct_CXX" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -n "$ac_ct_CXX" && break
 done
-test -n "$ac_ct_CXX" || ac_ct_CXX="g++"
 
-  CXX=$ac_ct_CXX
+  if test "x$ac_ct_CXX" = x; then
+    CXX="g++"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    CXX=$ac_ct_CXX
+  fi
 fi
 
-
+  fi
+fi
 # Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C++ compiler version" >&5
+echo "$as_me:$LINENO: checking for C++ compiler version" >&5
 ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler --version >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -v >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -V >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
 
-echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
 if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4683,24 +5499,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -4709,24 +5537,28 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_compiler_gnu=no
+	ac_compiler_gnu=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
 GXX=`test $ac_compiler_gnu = yes && echo yes`
 ac_test_CXXFLAGS=${CXXFLAGS+set}
 ac_save_CXXFLAGS=$CXXFLAGS
-CXXFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
-echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5
+echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
 if test "${ac_cv_prog_cxx_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
+  ac_save_cxx_werror_flag=$ac_cxx_werror_flag
+   ac_cxx_werror_flag=yes
+   ac_cv_prog_cxx_g=no
+   CXXFLAGS="-g"
+   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -4742,24 +5574,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -4768,70 +5612,53 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_prog_cxx_g=no
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6
-if test "$ac_test_CXXFLAGS" = set; then
-  CXXFLAGS=$ac_save_CXXFLAGS
-elif test $ac_cv_prog_cxx_g = yes; then
-  if test "$GXX" = yes; then
-    CXXFLAGS="-g -O2"
-  else
-    CXXFLAGS="-g"
-  fi
-else
-  if test "$GXX" = yes; then
-    CXXFLAGS="-O2"
-  else
-    CXXFLAGS=
-  fi
-fi
-for ac_declaration in \
-   '' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
+	CXXFLAGS=""
+      cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-$ac_declaration
-#include <stdlib.h>
+
 int
 main ()
 {
-exit (42);
+
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -4840,62 +5667,92 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
+	ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+	 CXXFLAGS="-g"
+	 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
-$ac_declaration
+
 int
 main ()
 {
-exit (42);
+
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
-  break
+  ac_cv_prog_cxx_g=yes
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
 
-ac_ext=cc
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_cxx_werror_flag=$ac_save_cxx_werror_flag
+fi
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
+if test "$ac_test_CXXFLAGS" = set; then
+  CXXFLAGS=$ac_save_CXXFLAGS
+elif test $ac_cv_prog_cxx_g = yes; then
+  if test "$GXX" = yes; then
+    CXXFLAGS="-g -O2"
+  else
+    CXXFLAGS="-g"
+  fi
+else
+  if test "$GXX" = yes; then
+    CXXFLAGS="-O2"
+  else
+    CXXFLAGS=
+  fi
+fi
+ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
@@ -4903,8 +5760,8 @@
 
 depcc="$CXX"  am_compiler_list=
 
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
 if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -4993,8 +5850,8 @@
 fi
 
 fi
-echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6
+{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
 CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
 
 
@@ -5015,13 +5872,13 @@
 if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
     ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
     (test "X$CXX" != "Xg++"))) ; then
-  ac_ext=cc
+  ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
-echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
-echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5
+echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; }
 if test -z "$CXXCPP"; then
   if test "${ac_cv_prog_CXXCPP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -5051,8 +5908,13 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
@@ -5077,9 +5939,10 @@
   # Broken: fails on valid input.
 continue
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether non-existent headers
+  # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -5089,8 +5952,13 @@
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
@@ -5117,6 +5985,7 @@
 ac_preproc_ok=:
 break
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
 done
@@ -5134,8 +6003,8 @@
 else
   ac_cv_prog_CXXCPP=$CXXCPP
 fi
-echo "$as_me:$LINENO: result: $CXXCPP" >&5
-echo "${ECHO_T}$CXXCPP" >&6
+{ echo "$as_me:$LINENO: result: $CXXCPP" >&5
+echo "${ECHO_T}$CXXCPP" >&6; }
 ac_preproc_ok=false
 for ac_cxx_preproc_warn_flag in '' yes
 do
@@ -5158,8 +6027,13 @@
 #endif
 		     Syntax error
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
@@ -5184,9 +6058,10 @@
   # Broken: fails on valid input.
 continue
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
-  # OK, works on sane cases.  Now check whether non-existent headers
+  # OK, works on sane cases.  Now check whether nonexistent headers
   # can be detected and how.
   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -5196,8 +6071,13 @@
 /* end confdefs.h.  */
 #include <ac_nonexistent.h>
 _ACEOF
-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5
-  (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1
+if { (ac_try="$ac_cpp conftest.$ac_ext"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
@@ -5224,6 +6104,7 @@
 ac_preproc_ok=:
 break
 fi
+
 rm -f conftest.err conftest.$ac_ext
 
 done
@@ -5239,7 +6120,7 @@
    { (exit 1); exit 1; }; }
 fi
 
-ac_ext=cc
+ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
@@ -5253,12 +6134,12 @@
 ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
 ac_compiler_gnu=$ac_cv_f77_compiler_gnu
 if test -n "$ac_tool_prefix"; then
-  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
+  for ac_prog in g77 f77 xlf frt pgf77 cf77 fort77 fl32 af77 f90 xlf90 pgf90 pghpf epcf90 gfortran g95 f95 fort xlf95 ifort ifc efc pgf95 lf95 ftn
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_F77+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5271,36 +6152,38 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 F77=$ac_cv_prog_F77
 if test -n "$F77"; then
-  echo "$as_me:$LINENO: result: $F77" >&5
-echo "${ECHO_T}$F77" >&6
+  { echo "$as_me:$LINENO: result: $F77" >&5
+echo "${ECHO_T}$F77" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
     test -n "$F77" && break
   done
 fi
 if test -z "$F77"; then
   ac_ct_F77=$F77
-  for ac_prog in g77 f77 xlf frt pgf77 fort77 fl32 af77 f90 xlf90 pgf90 epcf90 f95 fort xlf95 ifc efc pgf95 lf95 gfortran
+  for ac_prog in g77 f77 xlf frt pgf77 cf77 fort77 fl32 af77 f90 xlf90 pgf90 pghpf epcf90 gfortran g95 f95 fort xlf95 ifort ifc efc pgf95 lf95 ftn
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5313,48 +6196,78 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_F77="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_F77=$ac_cv_prog_ac_ct_F77
 if test -n "$ac_ct_F77"; then
-  echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
-echo "${ECHO_T}$ac_ct_F77" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5
+echo "${ECHO_T}$ac_ct_F77" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -n "$ac_ct_F77" && break
 done
 
-  F77=$ac_ct_F77
+  if test "x$ac_ct_F77" = x; then
+    F77=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    F77=$ac_ct_F77
+  fi
 fi
 
 
 # Provide some information about the compiler.
-echo "$as_me:5343:" \
-     "checking for Fortran 77 compiler version" >&5
+echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5
 ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler --version >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -v >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -V >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
@@ -5364,8 +6277,8 @@
 # input file.  (Note that this only needs to work for GNU compilers.)
 ac_save_ext=$ac_ext
 ac_ext=F
-echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; }
 if test "${ac_cv_f77_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5378,24 +6291,36 @@
       end
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_f77_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -5404,20 +6329,21 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_compiler_gnu=no
+	ac_compiler_gnu=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_f77_compiler_gnu=$ac_compiler_gnu
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; }
 ac_ext=$ac_save_ext
 ac_test_FFLAGS=${FFLAGS+set}
 ac_save_FFLAGS=$FFLAGS
 FFLAGS=
-echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
-echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5
+echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; }
 if test "${ac_cv_prog_f77_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5428,24 +6354,36 @@
       end
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_f77_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -5454,13 +6392,14 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_prog_f77_g=no
+	ac_cv_prog_f77_g=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
-echo "${ECHO_T}$ac_cv_prog_f77_g" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5
+echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; }
 if test "$ac_test_FFLAGS" = set; then
   FFLAGS=$ac_save_FFLAGS
 elif test $ac_cv_prog_f77_g = yes; then
@@ -5489,8 +6428,8 @@
 # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
 
 # find the maximum length of command line arguments
-echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
-echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5
+echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
 if test "${lt_cv_sys_max_cmd_len+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5598,19 +6537,19 @@
 fi
 
 if test -n $lt_cv_sys_max_cmd_len ; then
-  echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
-echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6
+  { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5
+echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
 else
-  echo "$as_me:$LINENO: result: none" >&5
-echo "${ECHO_T}none" >&6
+  { echo "$as_me:$LINENO: result: none" >&5
+echo "${ECHO_T}none" >&6; }
 fi
 
 
 
 
 # Check for command to grab the raw symbol name followed by C symbol from nm.
-echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
-echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5
+echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
 if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5645,7 +6584,7 @@
   lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
   lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/  {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/  {\"\2\", (lt_ptr) \&\2},/p'"
   ;;
-linux*)
+linux* | k*bsd*-gnu)
   if test "$host_cpu" = ia64; then
     symcode='[ABCDGIRSTW]'
     lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
@@ -5814,15 +6753,15 @@
   lt_cv_sys_global_symbol_to_cdecl=
 fi
 if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
-  echo "$as_me:$LINENO: result: failed" >&5
-echo "${ECHO_T}failed" >&6
+  { echo "$as_me:$LINENO: result: failed" >&5
+echo "${ECHO_T}failed" >&6; }
 else
-  echo "$as_me:$LINENO: result: ok" >&5
-echo "${ECHO_T}ok" >&6
+  { echo "$as_me:$LINENO: result: ok" >&5
+echo "${ECHO_T}ok" >&6; }
 fi
 
-echo "$as_me:$LINENO: checking for objdir" >&5
-echo $ECHO_N "checking for objdir... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for objdir" >&5
+echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
 if test "${lt_cv_objdir+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5836,8 +6775,8 @@
 fi
 rmdir .libs 2>/dev/null
 fi
-echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
-echo "${ECHO_T}$lt_cv_objdir" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5
+echo "${ECHO_T}$lt_cv_objdir" >&6; }
 objdir=$lt_cv_objdir
 
 
@@ -5888,8 +6827,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_AR+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5902,32 +6841,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_AR="${ac_tool_prefix}ar"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 AR=$ac_cv_prog_AR
 if test -n "$AR"; then
-  echo "$as_me:$LINENO: result: $AR" >&5
-echo "${ECHO_T}$AR" >&6
+  { echo "$as_me:$LINENO: result: $AR" >&5
+echo "${ECHO_T}$AR" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_AR"; then
   ac_ct_AR=$AR
   # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5940,27 +6881,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_AR="ar"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_AR" && ac_cv_prog_ac_ct_AR="false"
 fi
 fi
 ac_ct_AR=$ac_cv_prog_ac_ct_AR
 if test -n "$ac_ct_AR"; then
-  echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
-echo "${ECHO_T}$ac_ct_AR" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5
+echo "${ECHO_T}$ac_ct_AR" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  AR=$ac_ct_AR
+  if test "x$ac_ct_AR" = x; then
+    AR="false"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    AR=$ac_ct_AR
+  fi
 else
   AR="$ac_cv_prog_AR"
 fi
@@ -5968,8 +6923,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_RANLIB+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -5982,32 +6937,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 RANLIB=$ac_cv_prog_RANLIB
 if test -n "$RANLIB"; then
-  echo "$as_me:$LINENO: result: $RANLIB" >&5
-echo "${ECHO_T}$RANLIB" >&6
+  { echo "$as_me:$LINENO: result: $RANLIB" >&5
+echo "${ECHO_T}$RANLIB" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_RANLIB"; then
   ac_ct_RANLIB=$RANLIB
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6020,27 +6977,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_RANLIB="ranlib"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":"
 fi
 fi
 ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
 if test -n "$ac_ct_RANLIB"; then
-  echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
-echo "${ECHO_T}$ac_ct_RANLIB" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5
+echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  RANLIB=$ac_ct_RANLIB
+  if test "x$ac_ct_RANLIB" = x; then
+    RANLIB=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    RANLIB=$ac_ct_RANLIB
+  fi
 else
   RANLIB="$ac_cv_prog_RANLIB"
 fi
@@ -6048,8 +7019,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6062,32 +7033,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_STRIP="${ac_tool_prefix}strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 STRIP=$ac_cv_prog_STRIP
 if test -n "$STRIP"; then
-  echo "$as_me:$LINENO: result: $STRIP" >&5
-echo "${ECHO_T}$STRIP" >&6
+  { echo "$as_me:$LINENO: result: $STRIP" >&5
+echo "${ECHO_T}$STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_STRIP"; then
   ac_ct_STRIP=$STRIP
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6100,27 +7073,41 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_STRIP="strip"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
-  test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":"
 fi
 fi
 ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
 if test -n "$ac_ct_STRIP"; then
-  echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
-echo "${ECHO_T}$ac_ct_STRIP" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5
+echo "${ECHO_T}$ac_ct_STRIP" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  STRIP=$ac_ct_STRIP
+  if test "x$ac_ct_STRIP" = x; then
+    STRIP=":"
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    STRIP=$ac_ct_STRIP
+  fi
 else
   STRIP="$ac_cv_prog_STRIP"
 fi
@@ -6179,8 +7166,8 @@
 case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
-    echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5
+echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
 if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6232,17 +7219,17 @@
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
+  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
-    echo "$as_me:$LINENO: checking for file" >&5
-echo $ECHO_N "checking for file... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for file" >&5
+echo $ECHO_N "checking for file... $ECHO_C" >&6; }
 if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6294,11 +7281,11 @@
 
 MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
 if test -n "$MAGIC_CMD"; then
-  echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
-echo "${ECHO_T}$MAGIC_CMD" >&6
+  { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5
+echo "${ECHO_T}$MAGIC_CMD" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
   else
@@ -6313,83 +7300,22 @@
 enable_dlopen=no
 enable_win32_dll=no
 
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+# Check whether --enable-libtool-lock was given.
 if test "${enable_libtool_lock+set}" = set; then
-  enableval="$enable_libtool_lock"
+  enableval=$enable_libtool_lock;
+fi
 
-fi;
 test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
 
 
-# Check whether --with-pic or --without-pic was given.
+# Check whether --with-pic was given.
 if test "${with_pic+set}" = set; then
-  withval="$with_pic"
-  pic_mode="$withval"
+  withval=$with_pic; pic_mode="$withval"
 else
   pic_mode=default
-fi;
-test -z "$pic_mode" && pic_mode=default
-
-# Check if we have a version mismatch between libtool.m4 and ltmain.sh.
-#
-# Note:  This should be in AC_LIBTOOL_SETUP, _after_ $ltmain have been defined.
-#        We also should do it _before_ AC_LIBTOOL_LANG_C_CONFIG that actually
-#        calls AC_LIBTOOL_CONFIG and creates libtool.
-#
-echo "$as_me:$LINENO: checking for correct ltmain.sh version" >&5
-echo $ECHO_N "checking for correct ltmain.sh version... $ECHO_C" >&6
-if test "x$ltmain" = "x" ; then
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-  { { echo "$as_me:$LINENO: error:
-
-*** [Gentoo] sanity check failed! ***
-*** \$ltmain is not defined, please check the patch for consistency! ***
-" >&5
-echo "$as_me: error:
-
-*** [Gentoo] sanity check failed! ***
-*** \$ltmain is not defined, please check the patch for consistency! ***
-" >&2;}
-   { (exit 1); exit 1; }; }
-fi
-gentoo_lt_version="1.5.22"
-gentoo_ltmain_version=`sed -n '/^[ 	]*VERSION=/{s/^[ 	]*VERSION=//;p;q;}' "$ltmain"`
-if test "x$gentoo_lt_version" != "x$gentoo_ltmain_version" ; then
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-  { { echo "$as_me:$LINENO: error:
-
-*** [Gentoo] sanity check failed! ***
-*** libtool.m4 and ltmain.sh have a version mismatch! ***
-*** (libtool.m4 = $gentoo_lt_version, ltmain.sh = $gentoo_ltmain_version) ***
-
-Please run:
-
-  libtoolize --copy --force
-
-if appropriate, please contact the maintainer of this
-package (or your distribution) for help.
-" >&5
-echo "$as_me: error:
-
-*** [Gentoo] sanity check failed! ***
-*** libtool.m4 and ltmain.sh have a version mismatch! ***
-*** (libtool.m4 = $gentoo_lt_version, ltmain.sh = $gentoo_ltmain_version) ***
-
-Please run:
-
-  libtoolize --copy --force
-
-if appropriate, please contact the maintainer of this
-package (or your distribution) for help.
-" >&2;}
-   { (exit 1); exit 1; }; }
-else
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
 fi
 
+test -z "$pic_mode" && pic_mode=default
 
 # Use C for the default configuration in the libtool script
 tagname=
@@ -6446,8 +7372,8 @@
   lt_prog_compiler_no_builtin_flag=' -fno-builtin'
 
 
-echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6464,11 +7390,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:6467: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7393: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:6471: \$? = $ac_status" >&5
+   echo "$as_me:7397: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -6481,8 +7407,8 @@
    $rm conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
 if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
     lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
@@ -6496,8 +7422,8 @@
 lt_prog_compiler_pic=
 lt_prog_compiler_static=
 
-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
 
   if test "$GCC" = yes; then
     lt_prog_compiler_wl='-Wl,'
@@ -6626,7 +7552,7 @@
       lt_prog_compiler_static='-Bstatic'
       ;;
 
-    linux*)
+    linux* | k*bsd*-gnu)
       case $cc_basename in
       icc* | ecc*)
 	lt_prog_compiler_wl='-Wl,'
@@ -6706,16 +7632,16 @@
     esac
   fi
 
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
 
 #
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic"; then
 
-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
 if test "${lt_prog_compiler_pic_works+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6732,11 +7658,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:6735: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7661: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:6739: \$? = $ac_status" >&5
+   echo "$as_me:7665: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -6749,8 +7675,8 @@
    $rm conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; }
 
 if test x"$lt_prog_compiler_pic_works" = xyes; then
     case $lt_prog_compiler_pic in
@@ -6777,8 +7703,8 @@
 # Check to make sure the static flag actually works.
 #
 wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\"
-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
 if test "${lt_prog_compiler_static_works+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6805,8 +7731,8 @@
    LDFLAGS="$save_LDFLAGS"
 
 fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; }
 
 if test x"$lt_prog_compiler_static_works" = xyes; then
     :
@@ -6815,8 +7741,8 @@
 fi
 
 
-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_c_o+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -6836,11 +7762,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:6839: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:7765: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:6843: \$? = $ac_status" >&5
+   echo "$as_me:7769: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -6862,23 +7788,23 @@
    $rm conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
 
 
 hard_links="nottested"
 if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
-  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
   hard_links=yes
   $rm conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6
+  { echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6; }
   if test "$hard_links" = no; then
     { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
@@ -6888,8 +7814,8 @@
   need_locks=no
 fi
 
-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
 
   runpath_var=
   allow_undefined_flag=
@@ -7065,7 +7991,7 @@
       archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    linux*)
+    linux* | k*bsd*-gnu)
       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
 	tmp_addflag=
 	case $cc_basename,$host_cpu in
@@ -7091,12 +8017,13 @@
   $echo "local: *; };" >> $output_objdir/$libname.ver~
 	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
 	fi
+	link_all_deplibs=no
       else
 	ld_shlibs=no
       fi
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -7304,24 +8231,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -7335,8 +8274,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
@@ -7365,24 +8306,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -7396,8 +8349,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
@@ -7528,7 +8483,7 @@
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu | dragonfly*)
+    freebsd* | dragonfly*)
       archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec='-R$libdir'
       hardcode_direct=yes
@@ -7630,7 +8585,7 @@
       link_all_deplibs=yes
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -7846,8 +8801,8 @@
     esac
   fi
 
-echo "$as_me:$LINENO: result: $ld_shlibs" >&5
-echo "${ECHO_T}$ld_shlibs" >&6
+{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5
+echo "${ECHO_T}$ld_shlibs" >&6; }
 test "$ld_shlibs" = no && can_build_shared=no
 
 #
@@ -7867,8 +8822,8 @@
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
       $rm conftest*
       printf "$lt_simple_compile_test_code" > conftest.$ac_ext
 
@@ -7905,16 +8860,16 @@
         cat conftest.err 1>&5
       fi
       $rm conftest*
-      echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
-echo "${ECHO_T}$archive_cmds_need_lc" >&6
+      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5
+echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
       ;;
     esac
   fi
   ;;
 esac
 
-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
@@ -8079,30 +9034,6 @@
     esac
     ;;
 
-  linux*)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      supports_anon_versioning=no
-      case `$LD -v 2>/dev/null` in
-        *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-        *\ 2.11.*) ;; # other 2.11 versions
-        *) supports_anon_versioning=yes ;;
-      esac
-      if test $supports_anon_versioning = yes; then
-        archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
-        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-      else
-        $archive_expsym_cmds="$archive_cmds"
-      fi
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
   *)
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
@@ -8144,18 +9075,6 @@
   dynamic_linker=no
   ;;
 
-kfreebsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -8167,14 +9086,7 @@
     *) objformat=elf ;;
     esac
   fi
-  # Handle Gentoo/FreeBSD as it was Linux
-  case $host_vendor in
-    gentoo)
-      version_type=linux ;;
-    *)
-      version_type=freebsd-$objformat ;;
-  esac
-
+  version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
@@ -8185,12 +9097,6 @@
       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
-    linux)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-      soname_spec='${libname}${release}${shared_ext}$major'
-      need_lib_prefix=no
-      need_version=no
-      ;;
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
@@ -8324,7 +9230,7 @@
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -8353,7 +9259,7 @@
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-knetbsd*-gnu)
+netbsdelf*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -8362,7 +9268,7 @@
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
+  dynamic_linker='NetBSD ld.elf_so'
   ;;
 
 netbsd*)
@@ -8538,8 +9444,8 @@
   dynamic_linker=no
   ;;
 esac
-echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6
+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
@@ -8547,8 +9453,8 @@
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
 hardcode_action=
 if test -n "$hardcode_libdir_flag_spec" || \
    test -n "$runpath_var" || \
@@ -8572,8 +9478,8 @@
   # directories.
   hardcode_action=unsupported
 fi
-echo "$as_me:$LINENO: result: $hardcode_action" >&5
-echo "${ECHO_T}$hardcode_action" >&6
+{ echo "$as_me:$LINENO: result: $hardcode_action" >&5
+echo "${ECHO_T}$hardcode_action" >&6; }
 
 if test "$hardcode_action" = relink; then
   # Fast installation is not supported
@@ -8586,29 +9492,29 @@
 
 striplib=
 old_striplib=
-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5
+echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
 if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
   test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
   test -z "$striplib" && striplib="$STRIP --strip-unneeded"
-  echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+  { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 else
 # FIXME - insert some real tests, host_os isn't really good enough
   case $host_os in
    darwin*)
        if test -n "$STRIP" ; then
          striplib="$STRIP -x"
-         echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+         { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
        else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
        ;;
    *)
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
     ;;
   esac
 fi
@@ -8640,8 +9546,8 @@
 
   darwin*)
   # if libdl is installed we need to link against it
-    echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
 if test "${ac_cv_lib_dl_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -8654,40 +9560,52 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dlopen ();
 int
 main ()
 {
-dlopen ();
+return dlopen ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -8696,14 +9614,15 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_dl_dlopen=no
+	ac_cv_lib_dl_dlopen=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
 if test $ac_cv_lib_dl_dlopen = yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
@@ -8717,8 +9636,8 @@
    ;;
 
   *)
-    echo "$as_me:$LINENO: checking for shl_load" >&5
-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking for shl_load" >&5
+echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
 if test "${ac_cv_func_shl_load+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -8745,53 +9664,59 @@
 
 #undef shl_load
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char shl_load ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_shl_load) || defined (__stub___shl_load)
+#if defined __stub_shl_load || defined __stub___shl_load
 choke me
-#else
-char (*f) () = shl_load;
-#endif
-#ifdef __cplusplus
-}
 #endif
 
 int
 main ()
 {
-return f != shl_load;
+return shl_load ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -8800,18 +9725,19 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_func_shl_load=no
+	ac_cv_func_shl_load=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
-echo "${ECHO_T}$ac_cv_func_shl_load" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5
+echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
 if test $ac_cv_func_shl_load = yes; then
   lt_cv_dlopen="shl_load"
 else
-  echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5
+echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
 if test "${ac_cv_lib_dld_shl_load+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -8824,40 +9750,52 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char shl_load ();
 int
 main ()
 {
-shl_load ();
+return shl_load ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -8866,19 +9804,20 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_dld_shl_load=no
+	ac_cv_lib_dld_shl_load=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
 if test $ac_cv_lib_dld_shl_load = yes; then
   lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
 else
-  echo "$as_me:$LINENO: checking for dlopen" >&5
-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for dlopen" >&5
+echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
 if test "${ac_cv_func_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -8905,53 +9844,59 @@
 
 #undef dlopen
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
-{
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dlopen ();
 /* The GNU C library defines this for functions which it implements
     to always fail with ENOSYS.  Some functions are actually named
     something starting with __ and the normal name is an alias.  */
-#if defined (__stub_dlopen) || defined (__stub___dlopen)
+#if defined __stub_dlopen || defined __stub___dlopen
 choke me
-#else
-char (*f) () = dlopen;
-#endif
-#ifdef __cplusplus
-}
 #endif
 
 int
 main ()
 {
-return f != dlopen;
+return dlopen ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -8960,18 +9905,19 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_func_dlopen=no
+	ac_cv_func_dlopen=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 fi
-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
-echo "${ECHO_T}$ac_cv_func_dlopen" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5
+echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
 if test $ac_cv_func_dlopen = yes; then
   lt_cv_dlopen="dlopen"
 else
-  echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5
+echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
 if test "${ac_cv_lib_dl_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -8984,40 +9930,52 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dlopen ();
 int
 main ()
 {
-dlopen ();
+return dlopen ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -9026,19 +9984,20 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_dl_dlopen=no
+	ac_cv_lib_dl_dlopen=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
 if test $ac_cv_lib_dl_dlopen = yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
 else
-  echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5
+echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
 if test "${ac_cv_lib_svld_dlopen+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -9051,40 +10010,52 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dlopen ();
 int
 main ()
 {
-dlopen ();
+return dlopen ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -9093,19 +10064,20 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_svld_dlopen=no
+	ac_cv_lib_svld_dlopen=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5
+echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
 if test $ac_cv_lib_svld_dlopen = yes; then
   lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
 else
-  echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5
+echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
 if test "${ac_cv_lib_dld_dld_link+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -9118,40 +10090,52 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 
-/* Override any gcc2 internal prototype to avoid an error.  */
+/* Override any GCC internal prototype to avoid an error.
+   Use char because int might match the return type of a GCC
+   builtin and then its argument prototype would still apply.  */
 #ifdef __cplusplus
 extern "C"
 #endif
-/* We use char because int might match the return type of a gcc2
-   builtin and then its argument prototype would still apply.  */
 char dld_link ();
 int
 main ()
 {
-dld_link ();
+return dld_link ();
   ;
   return 0;
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -9160,14 +10144,15 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_lib_dld_dld_link=no
+	ac_cv_lib_dld_dld_link=no
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 LIBS=$ac_check_lib_save_LIBS
 fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5
+echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
 if test $ac_cv_lib_dld_dld_link = yes; then
   lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
 fi
@@ -9207,8 +10192,8 @@
     save_LIBS="$LIBS"
     LIBS="$lt_cv_dlopen_libs $LIBS"
 
-    echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6
+    { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5
+echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
 if test "${lt_cv_dlopen_self+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -9218,7 +10203,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 9221 "configure"
+#line 10206 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -9302,13 +10287,13 @@
 
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
 
     if test "x$lt_cv_dlopen_self" = xyes; then
       wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\"
-      echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6
+      { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5
+echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
 if test "${lt_cv_dlopen_self_static+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -9318,7 +10303,7 @@
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<EOF
-#line 9321 "configure"
+#line 10306 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -9402,8 +10387,8 @@
 
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5
+echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
     fi
 
     CPPFLAGS="$save_CPPFLAGS"
@@ -9425,13 +10410,13 @@
 
 
 # Report which library types will actually be built
-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6
+{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
+{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6; }
 
-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
 test "$can_build_shared" = "no" && enable_shared=no
 
 # On AIX, shared libraries and static libraries use the same namespace, and
@@ -9451,15 +10436,15 @@
   fi
     ;;
 esac
-echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6
+{ echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6; }
 
-echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
 # Make sure either enable_shared or enable_static is yes.
 test "$enable_shared" = yes || enable_static=yes
-echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6
+{ echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6; }
 
 # The else clause should only fire when bootstrapping the
 # libtool distribution, otherwise you forgot to ship ltmain.sh
@@ -9951,11 +10936,11 @@
 CC="$lt_save_CC"
 
 
-# Check whether --with-tags or --without-tags was given.
+# Check whether --with-tags was given.
 if test "${with_tags+set}" = set; then
-  withval="$with_tags"
-  tagnames="$withval"
-fi;
+  withval=$with_tags; tagnames="$withval"
+fi
+
 
 if test -f "$ltmain" && test -n "$tagnames"; then
   if test ! -f "${ofile}"; then
@@ -10009,7 +10994,7 @@
 	if test -n "$CXX" && ( test "X$CXX" != "Xno" &&
 	    ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) ||
 	    (test "X$CXX" != "Xg++"))) ; then
-	  ac_ext=cc
+	  ac_ext=cpp
 ac_cpp='$CXXCPP $CPPFLAGS'
 ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
 ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
@@ -10128,18 +11113,18 @@
   # Set up default GNU C++ configuration
 
 
-# Check whether --with-gnu-ld or --without-gnu-ld was given.
+# Check whether --with-gnu-ld was given.
 if test "${with_gnu_ld+set}" = set; then
-  withval="$with_gnu_ld"
-  test "$withval" = no || with_gnu_ld=yes
+  withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
 else
   with_gnu_ld=no
-fi;
+fi
+
 ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
-  echo "$as_me:$LINENO: checking for ld used by $CC" >&5
-echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for ld used by $CC" >&5
+echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -10168,11 +11153,11 @@
     ;;
   esac
 elif test "$with_gnu_ld" = yes; then
-  echo "$as_me:$LINENO: checking for GNU ld" >&5
-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for GNU ld" >&5
+echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
 else
-  echo "$as_me:$LINENO: checking for non-GNU ld" >&5
-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking for non-GNU ld" >&5
+echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
 fi
 if test "${lt_cv_path_LD+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
@@ -10205,17 +11190,17 @@
 
 LD="$lt_cv_path_LD"
 if test -n "$LD"; then
-  echo "$as_me:$LINENO: result: $LD" >&5
-echo "${ECHO_T}$LD" >&6
+  { echo "$as_me:$LINENO: result: $LD" >&5
+echo "${ECHO_T}$LD" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5
 echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
    { (exit 1); exit 1; }; }
-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5
+echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
 if test "${lt_cv_prog_gnu_ld+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -10229,8 +11214,8 @@
   ;;
 esac
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5
+echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
 with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
@@ -10280,8 +11265,8 @@
 fi
 
 # PORTME: fill in a description of your system's C++ link characteristics
-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
 ld_shlibs_CXX=yes
 case $host_os in
   aix3*)
@@ -10393,24 +11378,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -10424,8 +11421,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
@@ -10455,24 +11454,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_cxx_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_cxx_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -10486,8 +11497,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
@@ -10635,7 +11648,7 @@
   freebsd-elf*)
     archive_cmds_need_lc_CXX=no
     ;;
-  freebsd* | kfreebsd*-gnu | dragonfly*)
+  freebsd* | dragonfly*)
     # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
     # conventions
     ld_shlibs_CXX=yes
@@ -10794,7 +11807,7 @@
     hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
     hardcode_libdir_separator_CXX=:
     ;;
-  linux*)
+  linux* | k*bsd*-gnu)
     case $cc_basename in
       KCC*)
 	# Kuck and Associates, Inc. (KAI) C++ Compiler
@@ -10896,7 +11909,7 @@
 	;;
     esac
     ;;
-  netbsd*)
+  netbsd* | netbsdelf*-gnu)
     if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
       archive_cmds_CXX='$LD -Bshareable  -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
       wlarc=
@@ -11218,8 +12231,8 @@
     ld_shlibs_CXX=no
     ;;
 esac
-echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-echo "${ECHO_T}$ld_shlibs_CXX" >&6
+{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
 test "$ld_shlibs_CXX" = no && can_build_shared=no
 
 GCC_CXX="$GXX"
@@ -11358,8 +12371,8 @@
 lt_prog_compiler_pic_CXX=
 lt_prog_compiler_static_CXX=
 
-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
 
   # C++ specific cases for pic, static, wl, etc.
   if test "$GXX" = yes; then
@@ -11463,7 +12476,7 @@
 	    ;;
 	esac
 	;;
-      freebsd* | kfreebsd*-gnu | dragonfly*)
+      freebsd* | dragonfly*)
 	# FreeBSD uses GNU C++
 	;;
       hpux9* | hpux10* | hpux11*)
@@ -11506,7 +12519,7 @@
 	    ;;
 	esac
 	;;
-      linux*)
+      linux* | k*bsd*-gnu)
 	case $cc_basename in
 	  KCC*)
 	    # KAI C++ Compiler
@@ -11549,7 +12562,7 @@
 	    ;;
 	esac
 	;;
-      netbsd*)
+      netbsd* | netbsdelf*-gnu)
 	;;
       osf3* | osf4* | osf5*)
 	case $cc_basename in
@@ -11632,16 +12645,16 @@
     esac
   fi
 
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; }
 
 #
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic_CXX"; then
 
-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; }
 if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -11658,11 +12671,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:11661: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:12674: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:11665: \$? = $ac_status" >&5
+   echo "$as_me:12678: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -11675,8 +12688,8 @@
    $rm conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; }
 
 if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
     case $lt_prog_compiler_pic_CXX in
@@ -11703,8 +12716,8 @@
 # Check to make sure the static flag actually works.
 #
 wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\"
-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
 if test "${lt_prog_compiler_static_works_CXX+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -11731,8 +12744,8 @@
    LDFLAGS="$save_LDFLAGS"
 
 fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6; }
 
 if test x"$lt_prog_compiler_static_works_CXX" = xyes; then
     :
@@ -11741,8 +12754,8 @@
 fi
 
 
-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -11762,11 +12775,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:11765: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:12778: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:11769: \$? = $ac_status" >&5
+   echo "$as_me:12782: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -11788,23 +12801,23 @@
    $rm conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; }
 
 
 hard_links="nottested"
 if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
-  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
   hard_links=yes
   $rm conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6
+  { echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6; }
   if test "$hard_links" = no; then
     { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
@@ -11814,8 +12827,8 @@
   need_locks=no
 fi
 
-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
 
   export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   case $host_os in
@@ -11834,13 +12847,16 @@
   cygwin* | mingw*)
     export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
+  linux* | k*bsd*-gnu)
+    link_all_deplibs_CXX=no
+  ;;
   *)
     export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
   ;;
   esac
 
-echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
-echo "${ECHO_T}$ld_shlibs_CXX" >&6
+{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5
+echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
 test "$ld_shlibs_CXX" = no && can_build_shared=no
 
 #
@@ -11860,8 +12876,8 @@
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
       $rm conftest*
       printf "$lt_simple_compile_test_code" > conftest.$ac_ext
 
@@ -11898,16 +12914,16 @@
         cat conftest.err 1>&5
       fi
       $rm conftest*
-      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6
+      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5
+echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; }
       ;;
     esac
   fi
   ;;
 esac
 
-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
@@ -12072,30 +13088,6 @@
     esac
     ;;
 
-  linux*)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      supports_anon_versioning=no
-      case `$LD -v 2>/dev/null` in
-        *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-        *\ 2.11.*) ;; # other 2.11 versions
-        *) supports_anon_versioning=yes ;;
-      esac
-      if test $supports_anon_versioning = yes; then
-        archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
-        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-      else
-        $archive_expsym_cmds="$archive_cmds"
-      fi
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
   *)
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
@@ -12137,18 +13129,6 @@
   dynamic_linker=no
   ;;
 
-kfreebsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -12160,14 +13140,7 @@
     *) objformat=elf ;;
     esac
   fi
-  # Handle Gentoo/FreeBSD as it was Linux
-  case $host_vendor in
-    gentoo)
-      version_type=linux ;;
-    *)
-      version_type=freebsd-$objformat ;;
-  esac
-
+  version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
@@ -12178,12 +13151,6 @@
       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
-    linux)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-      soname_spec='${libname}${release}${shared_ext}$major'
-      need_lib_prefix=no
-      need_version=no
-      ;;
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
@@ -12317,7 +13284,7 @@
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -12346,7 +13313,7 @@
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-knetbsd*-gnu)
+netbsdelf*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -12355,7 +13322,7 @@
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
+  dynamic_linker='NetBSD ld.elf_so'
   ;;
 
 netbsd*)
@@ -12531,8 +13498,8 @@
   dynamic_linker=no
   ;;
 esac
-echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6
+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
@@ -12540,8 +13507,8 @@
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
 hardcode_action_CXX=
 if test -n "$hardcode_libdir_flag_spec_CXX" || \
    test -n "$runpath_var_CXX" || \
@@ -12565,8 +13532,8 @@
   # directories.
   hardcode_action_CXX=unsupported
 fi
-echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
-echo "${ECHO_T}$hardcode_action_CXX" >&6
+{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5
+echo "${ECHO_T}$hardcode_action_CXX" >&6; }
 
 if test "$hardcode_action_CXX" = relink; then
   # Fast installation is not supported
@@ -13091,13 +14058,13 @@
 cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"`
 
 
-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6
-echo "$as_me:$LINENO: result: $can_build_shared" >&5
-echo "${ECHO_T}$can_build_shared" >&6
+{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5
+echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
+{ echo "$as_me:$LINENO: result: $can_build_shared" >&5
+echo "${ECHO_T}$can_build_shared" >&6; }
 
-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5
+echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
 test "$can_build_shared" = "no" && enable_shared=no
 
 # On AIX, shared libraries and static libraries use the same namespace, and
@@ -13116,15 +14083,15 @@
   fi
   ;;
 esac
-echo "$as_me:$LINENO: result: $enable_shared" >&5
-echo "${ECHO_T}$enable_shared" >&6
+{ echo "$as_me:$LINENO: result: $enable_shared" >&5
+echo "${ECHO_T}$enable_shared" >&6; }
 
-echo "$as_me:$LINENO: checking whether to build static libraries" >&5
-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5
+echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
 # Make sure either enable_shared or enable_static is yes.
 test "$enable_shared" = yes || enable_static=yes
-echo "$as_me:$LINENO: result: $enable_static" >&5
-echo "${ECHO_T}$enable_static" >&6
+{ echo "$as_me:$LINENO: result: $enable_static" >&5
+echo "${ECHO_T}$enable_static" >&6; }
 
 GCC_F77="$G77"
 LD_F77="$LD"
@@ -13133,8 +14100,8 @@
 lt_prog_compiler_pic_F77=
 lt_prog_compiler_static_F77=
 
-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
 
   if test "$GCC" = yes; then
     lt_prog_compiler_wl_F77='-Wl,'
@@ -13263,7 +14230,7 @@
       lt_prog_compiler_static_F77='-Bstatic'
       ;;
 
-    linux*)
+    linux* | k*bsd*-gnu)
       case $cc_basename in
       icc* | ecc*)
 	lt_prog_compiler_wl_F77='-Wl,'
@@ -13343,16 +14310,16 @@
     esac
   fi
 
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; }
 
 #
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic_F77"; then
 
-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; }
 if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -13369,11 +14336,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13372: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:14339: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:13376: \$? = $ac_status" >&5
+   echo "$as_me:14343: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -13386,8 +14353,8 @@
    $rm conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; }
 
 if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
     case $lt_prog_compiler_pic_F77 in
@@ -13414,8 +14381,8 @@
 # Check to make sure the static flag actually works.
 #
 wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\"
-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
 if test "${lt_prog_compiler_static_works_F77+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -13442,8 +14409,8 @@
    LDFLAGS="$save_LDFLAGS"
 
 fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6; }
 
 if test x"$lt_prog_compiler_static_works_F77" = xyes; then
     :
@@ -13452,8 +14419,8 @@
 fi
 
 
-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -13473,11 +14440,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:13476: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:14443: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:13480: \$? = $ac_status" >&5
+   echo "$as_me:14447: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -13499,23 +14466,23 @@
    $rm conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; }
 
 
 hard_links="nottested"
 if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
-  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
   hard_links=yes
   $rm conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6
+  { echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6; }
   if test "$hard_links" = no; then
     { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
@@ -13525,8 +14492,8 @@
   need_locks=no
 fi
 
-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
 
   runpath_var=
   allow_undefined_flag_F77=
@@ -13702,7 +14669,7 @@
       archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    linux*)
+    linux* | k*bsd*-gnu)
       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
 	tmp_addflag=
 	case $cc_basename,$host_cpu in
@@ -13728,12 +14695,13 @@
   $echo "local: *; };" >> $output_objdir/$libname.ver~
 	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
 	fi
+	link_all_deplibs_F77=no
       else
 	ld_shlibs_F77=no
       fi
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -13931,24 +14899,36 @@
       end
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_f77_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -13962,8 +14942,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
@@ -13982,24 +14964,36 @@
       end
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_f77_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_f77_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -14013,8 +15007,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
@@ -14145,7 +15141,7 @@
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu | dragonfly*)
+    freebsd* | dragonfly*)
       archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec_F77='-R$libdir'
       hardcode_direct_F77=yes
@@ -14247,7 +15243,7 @@
       link_all_deplibs_F77=yes
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -14463,8 +15459,8 @@
     esac
   fi
 
-echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
-echo "${ECHO_T}$ld_shlibs_F77" >&6
+{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5
+echo "${ECHO_T}$ld_shlibs_F77" >&6; }
 test "$ld_shlibs_F77" = no && can_build_shared=no
 
 #
@@ -14484,8 +15480,8 @@
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
       $rm conftest*
       printf "$lt_simple_compile_test_code" > conftest.$ac_ext
 
@@ -14522,16 +15518,16 @@
         cat conftest.err 1>&5
       fi
       $rm conftest*
-      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6
+      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5
+echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; }
       ;;
     esac
   fi
   ;;
 esac
 
-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
@@ -14696,30 +15692,6 @@
     esac
     ;;
 
-  linux*)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      supports_anon_versioning=no
-      case `$LD -v 2>/dev/null` in
-        *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-        *\ 2.11.*) ;; # other 2.11 versions
-        *) supports_anon_versioning=yes ;;
-      esac
-      if test $supports_anon_versioning = yes; then
-        archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
-        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-      else
-        $archive_expsym_cmds="$archive_cmds"
-      fi
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
   *)
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
@@ -14761,18 +15733,6 @@
   dynamic_linker=no
   ;;
 
-kfreebsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -14784,14 +15744,7 @@
     *) objformat=elf ;;
     esac
   fi
-  # Handle Gentoo/FreeBSD as it was Linux
-  case $host_vendor in
-    gentoo)
-      version_type=linux ;;
-    *)
-      version_type=freebsd-$objformat ;;
-  esac
-
+  version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
@@ -14802,12 +15755,6 @@
       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
-    linux)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-      soname_spec='${libname}${release}${shared_ext}$major'
-      need_lib_prefix=no
-      need_version=no
-      ;;
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
@@ -14941,7 +15888,7 @@
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -14970,7 +15917,7 @@
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-knetbsd*-gnu)
+netbsdelf*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -14979,7 +15926,7 @@
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
+  dynamic_linker='NetBSD ld.elf_so'
   ;;
 
 netbsd*)
@@ -15155,8 +16102,8 @@
   dynamic_linker=no
   ;;
 esac
-echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6
+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
@@ -15164,8 +16111,8 @@
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
 hardcode_action_F77=
 if test -n "$hardcode_libdir_flag_spec_F77" || \
    test -n "$runpath_var_F77" || \
@@ -15189,8 +16136,8 @@
   # directories.
   hardcode_action_F77=unsupported
 fi
-echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
-echo "${ECHO_T}$hardcode_action_F77" >&6
+{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5
+echo "${ECHO_T}$hardcode_action_F77" >&6; }
 
 if test "$hardcode_action_F77" = relink; then
   # Fast installation is not supported
@@ -15627,7 +16574,6 @@
 	if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
 
 
-
 # Source file extension for Java test sources.
 ac_ext=java
 
@@ -15695,8 +16641,8 @@
   lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
 
 
-echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
+echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -15713,11 +16659,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:15716: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:16662: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:15720: \$? = $ac_status" >&5
+   echo "$as_me:16666: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -15730,8 +16676,8 @@
    $rm conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
 
 if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
     lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
@@ -15745,8 +16691,8 @@
 lt_prog_compiler_pic_GCJ=
 lt_prog_compiler_static_GCJ=
 
-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5
+echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
 
   if test "$GCC" = yes; then
     lt_prog_compiler_wl_GCJ='-Wl,'
@@ -15875,7 +16821,7 @@
       lt_prog_compiler_static_GCJ='-Bstatic'
       ;;
 
-    linux*)
+    linux* | k*bsd*-gnu)
       case $cc_basename in
       icc* | ecc*)
 	lt_prog_compiler_wl_GCJ='-Wl,'
@@ -15955,16 +16901,16 @@
     esac
   fi
 
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; }
 
 #
 # Check to make sure the PIC flag actually works.
 #
 if test -n "$lt_prog_compiler_pic_GCJ"; then
 
-echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
-echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
+echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; }
 if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -15981,11 +16927,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:15984: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:16930: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>conftest.err)
    ac_status=$?
    cat conftest.err >&5
-   echo "$as_me:15988: \$? = $ac_status" >&5
+   echo "$as_me:16934: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s "$ac_outfile"; then
      # The compiler can only warn and ignore the option if not recognized
      # So say no if there are warnings other than the usual output.
@@ -15998,8 +16944,8 @@
    $rm conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5
+echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; }
 
 if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
     case $lt_prog_compiler_pic_GCJ in
@@ -16026,8 +16972,8 @@
 # Check to make sure the static flag actually works.
 #
 wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\"
-echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
-echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5
+echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; }
 if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -16054,8 +17000,8 @@
    LDFLAGS="$save_LDFLAGS"
 
 fi
-echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
-echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6
+{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5
+echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6; }
 
 if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then
     :
@@ -16064,8 +17010,8 @@
 fi
 
 
-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5
+echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
 if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -16085,11 +17031,11 @@
    -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \
    -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
    -e 's:$: $lt_compiler_flag:'`
-   (eval echo "\"\$as_me:16088: $lt_compile\"" >&5)
+   (eval echo "\"\$as_me:17034: $lt_compile\"" >&5)
    (eval "$lt_compile" 2>out/conftest.err)
    ac_status=$?
    cat out/conftest.err >&5
-   echo "$as_me:16092: \$? = $ac_status" >&5
+   echo "$as_me:17038: \$? = $ac_status" >&5
    if (exit $ac_status) && test -s out/conftest2.$ac_objext
    then
      # The compiler can only warn and ignore the option if not recognized
@@ -16111,23 +17057,23 @@
    $rm conftest*
 
 fi
-echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
-echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6
+{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
+echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; }
 
 
 hard_links="nottested"
 if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
   # do not overwrite the value of need_locks provided by the user
-  echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6
+  { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5
+echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
   hard_links=yes
   $rm conftest*
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
   touch conftest.a
   ln conftest.a conftest.b 2>&5 || hard_links=no
   ln conftest.a conftest.b 2>/dev/null && hard_links=no
-  echo "$as_me:$LINENO: result: $hard_links" >&5
-echo "${ECHO_T}$hard_links" >&6
+  { echo "$as_me:$LINENO: result: $hard_links" >&5
+echo "${ECHO_T}$hard_links" >&6; }
   if test "$hard_links" = no; then
     { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
 echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
@@ -16137,8 +17083,8 @@
   need_locks=no
 fi
 
-echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
-echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5
+echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
 
   runpath_var=
   allow_undefined_flag_GCJ=
@@ -16314,7 +17260,7 @@
       archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib'
       ;;
 
-    linux*)
+    linux* | k*bsd*-gnu)
       if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
 	tmp_addflag=
 	case $cc_basename,$host_cpu in
@@ -16340,12 +17286,13 @@
   $echo "local: *; };" >> $output_objdir/$libname.ver~
 	  $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
 	fi
+	link_all_deplibs_GCJ=no
       else
 	ld_shlibs_GCJ=no
       fi
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
 	wlarc=
@@ -16553,24 +17500,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -16584,8 +17543,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
@@ -16614,24 +17575,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>conftest.er1
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -16645,8 +17618,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext \
+
+rm -f core conftest.err conftest.$ac_objext \
       conftest$ac_exeext conftest.$ac_ext
 if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
 
@@ -16777,7 +17752,7 @@
       ;;
 
     # FreeBSD 3 and greater uses gcc -shared to do shared libraries.
-    freebsd* | kfreebsd*-gnu | dragonfly*)
+    freebsd* | dragonfly*)
       archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags'
       hardcode_libdir_flag_spec_GCJ='-R$libdir'
       hardcode_direct_GCJ=yes
@@ -16879,7 +17854,7 @@
       link_all_deplibs_GCJ=yes
       ;;
 
-    netbsd*)
+    netbsd* | netbsdelf*-gnu)
       if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
 	archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'  # a.out
       else
@@ -17095,8 +18070,8 @@
     esac
   fi
 
-echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
-echo "${ECHO_T}$ld_shlibs_GCJ" >&6
+{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5
+echo "${ECHO_T}$ld_shlibs_GCJ" >&6; }
 test "$ld_shlibs_GCJ" = no && can_build_shared=no
 
 #
@@ -17116,8 +18091,8 @@
       # Test whether the compiler implicitly links with -lc since on some
       # systems, -lgcc has to come before -lc. If gcc already passes -lc
       # to ld, don't add -lc before -lgcc.
-      echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6
+      { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5
+echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
       $rm conftest*
       printf "$lt_simple_compile_test_code" > conftest.$ac_ext
 
@@ -17154,16 +18129,16 @@
         cat conftest.err 1>&5
       fi
       $rm conftest*
-      echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
-echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6
+      { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5
+echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; }
       ;;
     esac
   fi
   ;;
 esac
 
-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5
+echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
 library_names_spec=
 libname_spec='lib$name'
 soname_spec=
@@ -17328,30 +18303,6 @@
     esac
     ;;
 
-  linux*)
-    if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then
-      archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib'
-      supports_anon_versioning=no
-      case `$LD -v 2>/dev/null` in
-        *\ 01.* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11
-        *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ...
-        *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ...
-        *\ 2.11.*) ;; # other 2.11 versions
-        *) supports_anon_versioning=yes ;;
-      esac
-      if test $supports_anon_versioning = yes; then
-        archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~
-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~
-$echo "local: *; };" >> $output_objdir/$libname.ver~
-        $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib'
-      else
-        $archive_expsym_cmds="$archive_cmds"
-      fi
-    else
-      ld_shlibs=no
-    fi
-    ;;
-
   *)
     library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
     ;;
@@ -17393,18 +18344,6 @@
   dynamic_linker=no
   ;;
 
-kfreebsd*-gnu)
-  version_type=linux
-  need_lib_prefix=no
-  need_version=no
-  library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-  soname_spec='${libname}${release}${shared_ext}$major'
-  shlibpath_var=LD_LIBRARY_PATH
-  shlibpath_overrides_runpath=no
-  hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -17416,14 +18355,7 @@
     *) objformat=elf ;;
     esac
   fi
-  # Handle Gentoo/FreeBSD as it was Linux
-  case $host_vendor in
-    gentoo)
-      version_type=linux ;;
-    *)
-      version_type=freebsd-$objformat ;;
-  esac
-
+  version_type=freebsd-$objformat
   case $version_type in
     freebsd-elf*)
       library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
@@ -17434,12 +18366,6 @@
       library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
       need_version=yes
       ;;
-    linux)
-      library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
-      soname_spec='${libname}${release}${shared_ext}$major'
-      need_lib_prefix=no
-      need_version=no
-      ;;
   esac
   shlibpath_var=LD_LIBRARY_PATH
   case $host_os in
@@ -17573,7 +18499,7 @@
   ;;
 
 # This must be Linux ELF.
-linux*)
+linux* | k*bsd*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -17602,7 +18528,7 @@
   dynamic_linker='GNU/Linux ld.so'
   ;;
 
-knetbsd*-gnu)
+netbsdelf*-gnu)
   version_type=linux
   need_lib_prefix=no
   need_version=no
@@ -17611,7 +18537,7 @@
   shlibpath_var=LD_LIBRARY_PATH
   shlibpath_overrides_runpath=no
   hardcode_into_libs=yes
-  dynamic_linker='GNU ld.so'
+  dynamic_linker='NetBSD ld.elf_so'
   ;;
 
 netbsd*)
@@ -17787,8 +18713,8 @@
   dynamic_linker=no
   ;;
 esac
-echo "$as_me:$LINENO: result: $dynamic_linker" >&5
-echo "${ECHO_T}$dynamic_linker" >&6
+{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5
+echo "${ECHO_T}$dynamic_linker" >&6; }
 test "$dynamic_linker" = no && can_build_shared=no
 
 variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
@@ -17796,8 +18722,8 @@
   variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
 fi
 
-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5
+echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
 hardcode_action_GCJ=
 if test -n "$hardcode_libdir_flag_spec_GCJ" || \
    test -n "$runpath_var_GCJ" || \
@@ -17821,8 +18747,8 @@
   # directories.
   hardcode_action_GCJ=unsupported
 fi
-echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
-echo "${ECHO_T}$hardcode_action_GCJ" >&6
+{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5
+echo "${ECHO_T}$hardcode_action_GCJ" >&6; }
 
 if test "$hardcode_action_GCJ" = relink; then
   # Fast installation is not supported
@@ -18258,7 +19184,6 @@
       RC)
 
 
-
 # Source file extension for RC test sources.
 ac_ext=rc
 
@@ -18797,8 +19722,8 @@
 if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -18811,32 +19736,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_prog_CC"; then
   ac_ct_CC=$CC
   # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -18849,36 +19776,51 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="gcc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 else
   CC="$ac_cv_prog_CC"
 fi
 
 if test -z "$CC"; then
-  if test -n "$ac_tool_prefix"; then
-  # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
+          if test -n "$ac_tool_prefix"; then
+    # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
 set dummy ${ac_tool_prefix}cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -18891,74 +19833,34 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="${ac_tool_prefix}cc"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
-else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
-fi
-
-fi
-if test -z "$ac_cv_prog_CC"; then
-  ac_ct_CC=$CC
-  # Extract the first word of "cc", so it can be a program name with args.
-set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -n "$ac_ct_CC"; then
-  ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
-    ac_cv_prog_ac_ct_CC="cc"
-    echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
-    break 2
-  fi
-done
-done
-
-fi
-fi
-ac_ct_CC=$ac_cv_prog_ac_ct_CC
-if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  CC=$ac_ct_CC
-else
-  CC="$ac_cv_prog_CC"
-fi
 
+  fi
 fi
 if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -18972,7 +19874,7 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
        ac_prog_rejected=yes
        continue
@@ -18983,6 +19885,7 @@
   fi
 done
 done
+IFS=$as_save_IFS
 
 if test $ac_prog_rejected = yes; then
   # We found a bogon in the path, so make sure we never use it.
@@ -19000,22 +19903,23 @@
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$CC"; then
   if test -n "$ac_tool_prefix"; then
-  for ac_prog in cl
+  for ac_prog in cl.exe
   do
     # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
 set dummy $ac_tool_prefix$ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -19028,36 +19932,38 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 CC=$ac_cv_prog_CC
 if test -n "$CC"; then
-  echo "$as_me:$LINENO: result: $CC" >&5
-echo "${ECHO_T}$CC" >&6
+  { echo "$as_me:$LINENO: result: $CC" >&5
+echo "${ECHO_T}$CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
     test -n "$CC" && break
   done
 fi
 if test -z "$CC"; then
   ac_ct_CC=$CC
-  for ac_prog in cl
+  for ac_prog in cl.exe
 do
   # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -19070,29 +19976,45 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_prog_ac_ct_CC="$ac_prog"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
 fi
 fi
 ac_ct_CC=$ac_cv_prog_ac_ct_CC
 if test -n "$ac_ct_CC"; then
-  echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
-echo "${ECHO_T}$ac_ct_CC" >&6
+  { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5
+echo "${ECHO_T}$ac_ct_CC" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
   test -n "$ac_ct_CC" && break
 done
 
-  CC=$ac_ct_CC
+  if test "x$ac_ct_CC" = x; then
+    CC=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    CC=$ac_ct_CC
+  fi
 fi
 
 fi
@@ -19105,27 +20027,41 @@
    { (exit 1); exit 1; }; }
 
 # Provide some information about the compiler.
-echo "$as_me:$LINENO:" \
-     "checking for C compiler version" >&5
+echo "$as_me:$LINENO: checking for C compiler version" >&5
 ac_compiler=`set X $ac_compile; echo $2`
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version </dev/null >&5\"") >&5
-  (eval $ac_compiler --version </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler --version >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler --version >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v </dev/null >&5\"") >&5
-  (eval $ac_compiler -v </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -v >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -v >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V </dev/null >&5\"") >&5
-  (eval $ac_compiler -V </dev/null >&5) 2>&5
+{ (ac_try="$ac_compiler -V >&5"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compiler -V >&5") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }
 
-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5
+echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
 if test "${ac_cv_c_compiler_gnu+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -19148,24 +20084,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -19174,24 +20122,28 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_compiler_gnu=no
+	ac_compiler_gnu=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 ac_cv_c_compiler_gnu=$ac_compiler_gnu
 
 fi
-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5
+echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
 GCC=`test $ac_compiler_gnu = yes && echo yes`
 ac_test_CFLAGS=${CFLAGS+set}
 ac_save_CFLAGS=$CFLAGS
-CFLAGS="-g"
-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5
+echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
 if test "${ac_cv_prog_cc_g+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  cat >conftest.$ac_ext <<_ACEOF
+  ac_save_c_werror_flag=$ac_c_werror_flag
+   ac_c_werror_flag=yes
+   ac_cv_prog_cc_g=no
+   CFLAGS="-g"
+   cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
 _ACEOF
 cat confdefs.h >>conftest.$ac_ext
@@ -19207,24 +20159,147 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  ac_cv_prog_cc_g=yes
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	CFLAGS=""
+      cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
+  ac_status=$?
+  grep -v '^ *+' conftest.er1 >conftest.err
+  rm -f conftest.er1
+  cat conftest.err >&5
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); } &&
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; } &&
+	 { ac_try='test -s conftest.$ac_objext'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
+  ac_status=$?
+  echo "$as_me:$LINENO: \$? = $ac_status" >&5
+  (exit $ac_status); }; }; then
+  :
+else
+  echo "$as_me: failed program was:" >&5
+sed 's/^/| /' conftest.$ac_ext >&5
+
+	ac_c_werror_flag=$ac_save_c_werror_flag
+	 CFLAGS="-g"
+	 cat >conftest.$ac_ext <<_ACEOF
+/* confdefs.h.  */
+_ACEOF
+cat confdefs.h >>conftest.$ac_ext
+cat >>conftest.$ac_ext <<_ACEOF
+/* end confdefs.h.  */
+
+int
+main ()
+{
+
+  ;
+  return 0;
+}
+_ACEOF
+rm -f conftest.$ac_objext
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -19233,12 +20308,20 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_prog_cc_g=no
+
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+fi
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
+   ac_c_werror_flag=$ac_save_c_werror_flag
 fi
-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
 if test "$ac_test_CFLAGS" = set; then
   CFLAGS=$ac_save_CFLAGS
 elif test $ac_cv_prog_cc_g = yes; then
@@ -19254,12 +20337,12 @@
     CFLAGS=
   fi
 fi
-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5
-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6
-if test "${ac_cv_prog_cc_stdc+set}" = set; then
+{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5
+echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
+if test "${ac_cv_prog_cc_c89+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  ac_cv_prog_cc_stdc=no
+  ac_cv_prog_cc_c89=no
 ac_save_CC=$CC
 cat >conftest.$ac_ext <<_ACEOF
 /* confdefs.h.  */
@@ -19293,12 +20376,17 @@
 /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default.  It has
    function prototypes and stuff, but not '\xHH' hex character constants.
    These don't provoke an error unfortunately, instead are silently treated
-   as 'x'.  The following induces an error, until -std1 is added to get
+   as 'x'.  The following induces an error, until -std is added to get
    proper ANSI mode.  Curiously '\x00'!='x' always comes out true, for an
    array size at least.  It's necessary to write '\x00'==0 to get something
-   that's true only with -std1.  */
+   that's true only with -std.  */
 int osf4_cc_array ['\x00' == 0 ? 1 : -1];
 
+/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
+   inside strings and character constants.  */
+#define FOO(x) 'x'
+int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
+
 int test (int i, double x);
 struct s1 {int (*f) (int a);};
 struct s2 {int (*f) (double a);};
@@ -19313,236 +20401,105 @@
   return 0;
 }
 _ACEOF
-# Don't try gcc -ansi; that turns off useful extensions and
-# breaks some systems' header files.
-# AIX			-qlanglvl=ansi
-# Ultrix and OSF/1	-std1
-# HP-UX 10.20 and later	-Ae
-# HP-UX older versions	-Aa -D_HPUX_SOURCE
-# SVR4			-Xc -D__EXTENSIONS__
-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
+for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
+	-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
 do
   CC="$ac_save_CC $ac_arg"
   rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
-  ac_cv_prog_cc_stdc=$ac_arg
-break
+  ac_cv_prog_cc_c89=$ac_arg
 else
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
+
 fi
-rm -f conftest.err conftest.$ac_objext
+
+rm -f core conftest.err conftest.$ac_objext
+  test "x$ac_cv_prog_cc_c89" != "xno" && break
 done
-rm -f conftest.$ac_ext conftest.$ac_objext
+rm -f conftest.$ac_ext
 CC=$ac_save_CC
 
 fi
-
-case "x$ac_cv_prog_cc_stdc" in
-  x|xno)
-    echo "$as_me:$LINENO: result: none needed" >&5
-echo "${ECHO_T}none needed" >&6 ;;
+# AC_CACHE_VAL
+case "x$ac_cv_prog_cc_c89" in
+  x)
+    { echo "$as_me:$LINENO: result: none needed" >&5
+echo "${ECHO_T}none needed" >&6; } ;;
+  xno)
+    { echo "$as_me:$LINENO: result: unsupported" >&5
+echo "${ECHO_T}unsupported" >&6; } ;;
   *)
-    echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5
-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6
-    CC="$CC $ac_cv_prog_cc_stdc" ;;
+    CC="$CC $ac_cv_prog_cc_c89"
+    { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5
+echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
 esac
 
-# Some people use a C++ compiler to compile C.  Since we use `exit',
-# in C++ we need to declare it.  In case someone uses the same compiler
-# for both compiling C and C++ we need to have the C++ compiler decide
-# the declaration of exit, since it's the most demanding environment.
-cat >conftest.$ac_ext <<_ACEOF
-#ifndef __cplusplus
-  choke me
-#endif
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  for ac_declaration in \
-   '' \
-   'extern "C" void std::exit (int) throw (); using std::exit;' \
-   'extern "C" void std::exit (int); using std::exit;' \
-   'extern "C" void exit (int) throw ();' \
-   'extern "C" void exit (int);' \
-   'void exit (int);'
-do
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-#include <stdlib.h>
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  :
+
+ac_ext=c
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
+ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
+ac_compiler_gnu=$ac_cv_c_compiler_gnu
+
+depcc="$CC"   am_compiler_list=
+
+{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
+echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
+if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
+  echo $ECHO_N "(cached) $ECHO_C" >&6
 else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-continue
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-  cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h.  */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h.  */
-$ac_declaration
-int
-main ()
-{
-exit (42);
-  ;
-  return 0;
-}
-_ACEOF
-rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
-  ac_status=$?
-  grep -v '^ *+' conftest.er1 >conftest.err
-  rm -f conftest.er1
-  cat conftest.err >&5
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; } &&
-	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
-  ac_status=$?
-  echo "$as_me:$LINENO: \$? = $ac_status" >&5
-  (exit $ac_status); }; }; then
-  break
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-done
-rm -f conftest*
-if test -n "$ac_declaration"; then
-  echo '#ifdef __cplusplus' >>confdefs.h
-  echo $ac_declaration      >>confdefs.h
-  echo '#endif'             >>confdefs.h
-fi
-
-else
-  echo "$as_me: failed program was:" >&5
-sed 's/^/| /' conftest.$ac_ext >&5
-
-fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
-ac_ext=c
-ac_cpp='$CPP $CPPFLAGS'
-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
-ac_compiler_gnu=$ac_cv_c_compiler_gnu
-
-depcc="$CC"   am_compiler_list=
-
-echo "$as_me:$LINENO: checking dependency style of $depcc" >&5
-echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6
-if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
-  echo $ECHO_N "(cached) $ECHO_C" >&6
-else
-  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named `D' -- because `-MD' means `put the output
-  # in D'.
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
+  if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
+  # We make a subdir and do the tests there.  Otherwise we can end up
+  # making bogus files that we don't know about and never remove.  For
+  # instance it was reported that on HP-UX the gcc test will end up
+  # making a dummy file named `D' -- because `-MD' means `put the output
+  # in D'.
+  mkdir conftest.dir
+  # Copy depcomp to subdir because otherwise we won't find it if we're
+  # using a relative directory.
+  cp "$am_depcomp" conftest.dir
+  cd conftest.dir
+  # We will build objects and dependencies in a subdirectory because
+  # it helps to detect inapplicable dependency modes.  For instance
+  # both Tru64's cc and ICC support -MD to output dependencies as a
+  # side effect of compilation, but ICC will put the dependencies in
+  # the current directory while Tru64 will put them in the object
+  # directory.
+  mkdir sub
 
   am_cv_CC_dependencies_compiler_type=none
   if test "$am_compiler_list" = ""; then
@@ -19610,8 +20567,8 @@
 fi
 
 fi
-echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
-echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6
+{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5
+echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
 CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
 
 
@@ -19632,13 +20589,13 @@
 
 
 
-# Check whether --with-xorg-module-dir or --without-xorg-module-dir was given.
+# Check whether --with-xorg-module-dir was given.
 if test "${with_xorg_module_dir+set}" = set; then
-  withval="$with_xorg_module_dir"
-  moduledir="$withval"
+  withval=$with_xorg_module_dir; moduledir="$withval"
 else
   moduledir="$libdir/xorg/modules"
-fi;
+fi
+
 
 # Checks for extensions
 
@@ -19665,24 +20622,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -19691,14 +20660,15 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-_EXT_CHECK=no
+	_EXT_CHECK=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 	CFLAGS="$SAVE_CFLAGS"
-	echo "$as_me:$LINENO: checking if RANDR is defined" >&5
-echo $ECHO_N "checking if RANDR is defined... $ECHO_C" >&6
-	echo "$as_me:$LINENO: result: $_EXT_CHECK" >&5
-echo "${ECHO_T}$_EXT_CHECK" >&6
+	{ echo "$as_me:$LINENO: checking if RANDR is defined" >&5
+echo $ECHO_N "checking if RANDR is defined... $ECHO_C" >&6; }
+	{ echo "$as_me:$LINENO: result: $_EXT_CHECK" >&5
+echo "${ECHO_T}$_EXT_CHECK" >&6; }
 	if test "$_EXT_CHECK" != no; then
 		REQUIRED_MODULES="$REQUIRED_MODULES randrproto"
 	fi
@@ -19727,24 +20697,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -19753,14 +20735,15 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-_EXT_CHECK=no
+	_EXT_CHECK=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 	CFLAGS="$SAVE_CFLAGS"
-	echo "$as_me:$LINENO: checking if RENDER is defined" >&5
-echo $ECHO_N "checking if RENDER is defined... $ECHO_C" >&6
-	echo "$as_me:$LINENO: result: $_EXT_CHECK" >&5
-echo "${ECHO_T}$_EXT_CHECK" >&6
+	{ echo "$as_me:$LINENO: checking if RENDER is defined" >&5
+echo $ECHO_N "checking if RENDER is defined... $ECHO_C" >&6; }
+	{ echo "$as_me:$LINENO: result: $_EXT_CHECK" >&5
+echo "${ECHO_T}$_EXT_CHECK" >&6; }
 	if test "$_EXT_CHECK" != no; then
 		REQUIRED_MODULES="$REQUIRED_MODULES renderproto"
 	fi
@@ -19789,24 +20772,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -19815,14 +20810,15 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-_EXT_CHECK=no
+	_EXT_CHECK=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 	CFLAGS="$SAVE_CFLAGS"
-	echo "$as_me:$LINENO: checking if XV is defined" >&5
-echo $ECHO_N "checking if XV is defined... $ECHO_C" >&6
-	echo "$as_me:$LINENO: result: $_EXT_CHECK" >&5
-echo "${ECHO_T}$_EXT_CHECK" >&6
+	{ echo "$as_me:$LINENO: checking if XV is defined" >&5
+echo $ECHO_N "checking if XV is defined... $ECHO_C" >&6; }
+	{ echo "$as_me:$LINENO: result: $_EXT_CHECK" >&5
+echo "${ECHO_T}$_EXT_CHECK" >&6; }
 	if test "$_EXT_CHECK" != no; then
 		REQUIRED_MODULES="$REQUIRED_MODULES videoproto"
 	fi
@@ -19851,24 +20847,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -19877,14 +20885,15 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-_EXT_CHECK=no
+	_EXT_CHECK=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 	CFLAGS="$SAVE_CFLAGS"
-	echo "$as_me:$LINENO: checking if DPMSExtension is defined" >&5
-echo $ECHO_N "checking if DPMSExtension is defined... $ECHO_C" >&6
-	echo "$as_me:$LINENO: result: $_EXT_CHECK" >&5
-echo "${ECHO_T}$_EXT_CHECK" >&6
+	{ echo "$as_me:$LINENO: checking if DPMSExtension is defined" >&5
+echo $ECHO_N "checking if DPMSExtension is defined... $ECHO_C" >&6; }
+	{ echo "$as_me:$LINENO: result: $_EXT_CHECK" >&5
+echo "${ECHO_T}$_EXT_CHECK" >&6; }
 	if test "$_EXT_CHECK" != no; then
 		REQUIRED_MODULES="$REQUIRED_MODULES xextproto"
 	fi
@@ -19898,8 +20907,8 @@
 	if test -n "$ac_tool_prefix"; then
   # Extract the first word of "${ac_tool_prefix}pkg-config", so it can be a program name with args.
 set dummy ${ac_tool_prefix}pkg-config; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_path_PKG_CONFIG+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -19914,34 +20923,35 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
   ;;
 esac
 fi
 PKG_CONFIG=$ac_cv_path_PKG_CONFIG
-
 if test -n "$PKG_CONFIG"; then
-  echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
-echo "${ECHO_T}$PKG_CONFIG" >&6
+  { echo "$as_me:$LINENO: result: $PKG_CONFIG" >&5
+echo "${ECHO_T}$PKG_CONFIG" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
+
 fi
 if test -z "$ac_cv_path_PKG_CONFIG"; then
   ac_pt_PKG_CONFIG=$PKG_CONFIG
   # Extract the first word of "pkg-config", so it can be a program name with args.
 set dummy pkg-config; ac_word=$2
-echo "$as_me:$LINENO: checking for $ac_word" >&5
-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for $ac_word" >&5
+echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
 if test "${ac_cv_path_ac_pt_PKG_CONFIG+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -19956,28 +20966,42 @@
   IFS=$as_save_IFS
   test -z "$as_dir" && as_dir=.
   for ac_exec_ext in '' $ac_executable_extensions; do
-  if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
+  if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; }; then
     ac_cv_path_ac_pt_PKG_CONFIG="$as_dir/$ac_word$ac_exec_ext"
     echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5
     break 2
   fi
 done
 done
+IFS=$as_save_IFS
 
   ;;
 esac
 fi
 ac_pt_PKG_CONFIG=$ac_cv_path_ac_pt_PKG_CONFIG
-
 if test -n "$ac_pt_PKG_CONFIG"; then
-  echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
-echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6
+  { echo "$as_me:$LINENO: result: $ac_pt_PKG_CONFIG" >&5
+echo "${ECHO_T}$ac_pt_PKG_CONFIG" >&6; }
 else
-  echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+  { echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 fi
 
-  PKG_CONFIG=$ac_pt_PKG_CONFIG
+  if test "x$ac_pt_PKG_CONFIG" = x; then
+    PKG_CONFIG=""
+  else
+    case $cross_compiling:$ac_tool_warned in
+yes:)
+{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&5
+echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
+whose name does not start with the host triplet.  If you think this
+configuration is useful to you, please write to autoconf@gnu.org." >&2;}
+ac_tool_warned=yes ;;
+esac
+    PKG_CONFIG=$ac_pt_PKG_CONFIG
+  fi
 else
   PKG_CONFIG="$ac_cv_path_PKG_CONFIG"
 fi
@@ -19985,14 +21009,14 @@
 fi
 if test -n "$PKG_CONFIG"; then
 	_pkg_min_version=0.9.0
-	echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
-echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6
+	{ echo "$as_me:$LINENO: checking pkg-config is at least version $_pkg_min_version" >&5
+echo $ECHO_N "checking pkg-config is at least version $_pkg_min_version... $ECHO_C" >&6; }
 	if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then
-		echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+		{ echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 	else
-		echo "$as_me:$LINENO: result: no" >&5
-echo "${ECHO_T}no" >&6
+		{ echo "$as_me:$LINENO: result: no" >&5
+echo "${ECHO_T}no" >&6; }
 		PKG_CONFIG=""
 	fi
 
@@ -20019,8 +21043,8 @@
 # Checks for pkg-config packages
 
 pkg_failed=no
-echo "$as_me:$LINENO: checking for XORG" >&5
-echo $ECHO_N "checking for XORG... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for XORG" >&5
+echo $ECHO_N "checking for XORG... $ECHO_C" >&6; }
 
 if test -n "$PKG_CONFIG"; then
     if test -n "$XORG_CFLAGS"; then
@@ -20124,8 +21148,8 @@
 else
 	XORG_CFLAGS=$pkg_cv_XORG_CFLAGS
 	XORG_LIBS=$pkg_cv_XORG_LIBS
-        echo "$as_me:$LINENO: result: yes" >&5
-echo "${ECHO_T}yes" >&6
+        { echo "$as_me:$LINENO: result: yes" >&5
+echo "${ECHO_T}yes" >&6; }
 	:
 fi
 sdkdir=$(pkg-config --variable=sdkdir xorg-server)
@@ -20133,8 +21157,8 @@
 # Checks for libraries.
 
 # Checks for header files.
-echo "$as_me:$LINENO: checking for ANSI C header files" >&5
-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6
+{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5
+echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
 if test "${ac_cv_header_stdc+set}" = set; then
   echo $ECHO_N "(cached) $ECHO_C" >&6
 else
@@ -20158,24 +21182,36 @@
 }
 _ACEOF
 rm -f conftest.$ac_objext
-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5
-  (eval $ac_compile) 2>conftest.er1
+if { (ac_try="$ac_compile"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_compile") 2>conftest.er1
   ac_status=$?
   grep -v '^ *+' conftest.er1 >conftest.err
   rm -f conftest.er1
   cat conftest.err >&5
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } &&
-	 { ac_try='test -z "$ac_c_werror_flag"
-			 || test ! -s conftest.err'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+	 { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err'
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; } &&
 	 { ac_try='test -s conftest.$ac_objext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -20184,9 +21220,10 @@
   echo "$as_me: failed program was:" >&5
 sed 's/^/| /' conftest.$ac_ext >&5
 
-ac_cv_header_stdc=no
+	ac_cv_header_stdc=no
 fi
-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext
+
+rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
 
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
@@ -20242,6 +21279,7 @@
 cat >>conftest.$ac_ext <<_ACEOF
 /* end confdefs.h.  */
 #include <ctype.h>
+#include <stdlib.h>
 #if ((' ' & 0x0FF) == 0x020)
 # define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
 # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
@@ -20261,18 +21299,27 @@
   for (i = 0; i < 256; i++)
     if (XOR (islower (i), ISLOWER (i))
 	|| toupper (i) != TOUPPER (i))
-      exit(2);
-  exit (0);
+      return 2;
+  return 0;
 }
 _ACEOF
 rm -f conftest$ac_exeext
-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5
-  (eval $ac_link) 2>&5
+if { (ac_try="$ac_link"
+case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_link") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } && { ac_try='./conftest$ac_exeext'
-  { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5
-  (eval $ac_try) 2>&5
+  { (case "(($ac_try" in
+  *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
+  *) ac_try_echo=$ac_try;;
+esac
+eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5
+  (eval "$ac_try") 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); }; }; then
@@ -20285,12 +21332,14 @@
 ( exit $ac_status )
 ac_cv_header_stdc=no
 fi
-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
+rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
 fi
+
+
 fi
 fi
-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
-echo "${ECHO_T}$ac_cv_header_stdc" >&6
+{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5
+echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
 if test $ac_cv_header_stdc = yes; then
 
 cat >>confdefs.h <<\_ACEOF
@@ -20311,40 +21360,37 @@
 
 if test x$APP_MAN_SUFFIX = x    ; then
     case $host_os in
-	linux* | k*bsd*-gnu)	APP_MAN_SUFFIX=1x ;;
+	gnu* | k*bsd*-gnu)	APP_MAN_SUFFIX=1x ;;
 	*)	APP_MAN_SUFFIX=1  ;;
     esac
 fi
 if test x$APP_MAN_DIR = x    ; then
     case $host_os in
-	linux* | k*bsd*-gnu)	APP_MAN_DIR='$(mandir)/man1' ;;
+	gnu* | k*bsd*-gnu)	APP_MAN_DIR='$(mandir)/man1' ;;
 	*)	APP_MAN_DIR='$(mandir)/man$(APP_MAN_SUFFIX)' ;;
     esac
 fi
 
 if test x$LIB_MAN_SUFFIX = x    ; then
     case $host_os in
-	linux* | k*bsd*-gnu)	LIB_MAN_SUFFIX=3x ;;
 	*)	LIB_MAN_SUFFIX=3  ;;
     esac
 fi
 if test x$LIB_MAN_DIR = x    ; then
     case $host_os in
-	linux* | k*bsd*-gnu)	LIB_MAN_DIR='$(mandir)/man3' ;;
 	*)	LIB_MAN_DIR='$(mandir)/man$(LIB_MAN_SUFFIX)' ;;
     esac
 fi
 
 if test x$FILE_MAN_SUFFIX = x    ; then
     case $host_os in
-	linux* | k*bsd*-gnu)		FILE_MAN_SUFFIX=5x ;;
 	solaris*)	FILE_MAN_SUFFIX=4  ;;
 	*)		FILE_MAN_SUFFIX=5  ;;
     esac
 fi
 if test x$FILE_MAN_DIR = x    ; then
     case $host_os in
-	linux* | k*bsd*-gnu)	FILE_MAN_DIR='$(mandir)/man5' ;;
+	gnu* | k*bsd*-gnu)	FILE_MAN_DIR='$(mandir)/man5' ;;
 	*)	FILE_MAN_DIR='$(mandir)/man$(FILE_MAN_SUFFIX)' ;;
     esac
 fi
@@ -20353,14 +21399,12 @@
 # LinuxDebian, not other Linuxes, so we leave it unchanged here
 if test x$MISC_MAN_SUFFIX = x    ; then
     case $host_os in
-#	linux* | k*bsd*-gnu)		MISC_MAN_SUFFIX=7x ;;
 	solaris*)	MISC_MAN_SUFFIX=5  ;;
 	*)		MISC_MAN_SUFFIX=7  ;;
     esac
 fi
 if test x$MISC_MAN_DIR = x    ; then
     case $host_os in
-#	linux* | k*bsd*-gnu)	MISC_MAN_DIR='$(mandir)/man7' ;;
 	*)	MISC_MAN_DIR='$(mandir)/man$(MISC_MAN_SUFFIX)' ;;
     esac
 fi
@@ -20369,14 +21413,14 @@
 # LinuxDebian, not other Linuxes, so we leave it unchanged here
 if test x$DRIVER_MAN_SUFFIX = x    ; then
     case $host_os in
-#	linux* | k*bsd*-gnu)		DRIVER_MAN_SUFFIX=4x ;;
+#	gnu* | k*bsd*-gnu)		DRIVER_MAN_SUFFIX=4x ;;
 	solaris*)	DRIVER_MAN_SUFFIX=7  ;;
 	*)		DRIVER_MAN_SUFFIX=4  ;;
     esac
 fi
 if test x$DRIVER_MAN_DIR = x    ; then
     case $host_os in
-#	linux* | k*bsd*-gnu)	DRIVER_MAN_DIR='$(mandir)/man4' ;;
+#	gnu* | k*bsd*-gnu)	DRIVER_MAN_DIR='$(mandir)/man4' ;;
 	*)	DRIVER_MAN_DIR='$(mandir)/man$(DRIVER_MAN_SUFFIX)' ;;
     esac
 fi
@@ -20407,13 +21451,13 @@
 
 
 
-# Check whether --with-release-version or --without-release-version was given.
+# Check whether --with-release-version was given.
 if test "${with_release_version+set}" = set; then
-  withval="$with_release_version"
-  RELEASE_VERSION="$withval"
+  withval=$with_release_version; RELEASE_VERSION="$withval"
 else
   RELEASE_VERSION=""
-fi;
+fi
+
 	if test "x$RELEASE_VERSION" != "x"; then
 		PACKAGE="$PACKAGE-$RELEASE_VERSION"
 		PACKAGE_TARNAME="$PACKAGE_TARNAME-$RELEASE_VERSION"
@@ -20422,7 +21466,8 @@
 	fi
 
 
-                              ac_config_files="$ac_config_files Makefile src/Makefile man/Makefile"
+ac_config_files="$ac_config_files Makefile src/Makefile man/Makefile"
+
 cat >confcache <<\_ACEOF
 # This file is a shell script that caches the results of configure
 # tests run on this system so they can be shared between configure
@@ -20441,39 +21486,58 @@
 
 # The following way of writing the cache mishandles newlines in values,
 # but we know of no workaround that is simple, portable, and efficient.
-# So, don't put newlines in cache variables' values.
+# So, we kill variables containing newlines.
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
-{
+(
+  for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
+    eval ac_val=\$$ac_var
+    case $ac_val in #(
+    *${as_nl}*)
+      case $ac_var in #(
+      *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5
+echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
+      esac
+      case $ac_var in #(
+      _ | IFS | as_nl) ;; #(
+      *) $as_unset $ac_var ;;
+      esac ;;
+    esac
+  done
+
   (set) 2>&1 |
-    case `(ac_space=' '; set | grep ac_space) 2>&1` in
-    *ac_space=\ *)
+    case $as_nl`(ac_space=' '; set) 2>&1` in #(
+    *${as_nl}ac_space=\ *)
       # `set' does not quote correctly, so add quotes (double-quote
       # substitution turns \\\\ into \\, and sed turns \\ into \).
       sed -n \
 	"s/'/'\\\\''/g;
 	  s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
-      ;;
+      ;; #(
     *)
       # `set' quotes correctly as required by POSIX, so do not add quotes.
-      sed -n \
-	"s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p"
+      sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
       ;;
-    esac;
-} |
+    esac |
+    sort
+) |
   sed '
+     /^ac_cv_env_/b end
      t clear
-     : clear
+     :clear
      s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
      t end
-     /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
-     : end' >>confcache
-if diff $cache_file confcache >/dev/null 2>&1; then :; else
-  if test -w $cache_file; then
-    test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file"
+     s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
+     :end' >>confcache
+if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
+  if test -w "$cache_file"; then
+    test "x$cache_file" != "x/dev/null" &&
+      { echo "$as_me:$LINENO: updating cache $cache_file" >&5
+echo "$as_me: updating cache $cache_file" >&6;}
     cat confcache >$cache_file
   else
-    echo "not updating unwritable cache $cache_file"
+    { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5
+echo "$as_me: not updating unwritable cache $cache_file" >&6;}
   fi
 fi
 rm -f confcache
@@ -20482,32 +21546,18 @@
 # Let make expand exec_prefix.
 test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
 
-# VPATH may cause trouble with some makes, so we remove $(srcdir),
-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
-# trailing colons and then remove the whole line if VPATH becomes empty
-# (actually we leave an empty line to preserve line numbers).
-if test "x$srcdir" = x.; then
-  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
-s/:*\$(srcdir):*/:/;
-s/:*\${srcdir}:*/:/;
-s/:*@srcdir@:*/:/;
-s/^\([^=]*=[	 ]*\):*/\1/;
-s/:*$//;
-s/^[^=]*=[	 ]*$//;
-}'
-fi
-
 DEFS=-DHAVE_CONFIG_H
 
 ac_libobjs=
 ac_ltlibobjs=
 for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
   # 1. Remove the extension, and $U if already installed.
-  ac_i=`echo "$ac_i" |
-	 sed 's/\$U\././;s/\.o$//;s/\.obj$//'`
-  # 2. Add them.
-  ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext"
-  ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo'
+  ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
+  ac_i=`echo "$ac_i" | sed "$ac_script"`
+  # 2. Prepend LIBOBJDIR.  When used with automake>=1.10 LIBOBJDIR
+  #    will be set to the directory where LIBOBJS objects are built.
+  ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
+  ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
 done
 LIBOBJS=$ac_libobjs
 
@@ -20580,11 +21630,35 @@
   # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
   # is contrary to our usage.  Disable this feature.
   alias -g '${1+"$@"}'='"$@"'
-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then
-  set -o posix
+  setopt NO_GLOB_SUBST
+else
+  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
 fi
+BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
+
+# PATH needs CR
+# Avoid depending upon Character Ranges.
+as_cr_letters='abcdefghijklmnopqrstuvwxyz'
+as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
+as_cr_Letters=$as_cr_letters$as_cr_LETTERS
+as_cr_digits='0123456789'
+as_cr_alnum=$as_cr_Letters$as_cr_digits
+
+# The user is always right.
+if test "${PATH_SEPARATOR+set}" != set; then
+  echo "#! /bin/sh" >conf$$.sh
+  echo  "exit 0"   >>conf$$.sh
+  chmod +x conf$$.sh
+  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
+    PATH_SEPARATOR=';'
+  else
+    PATH_SEPARATOR=:
+  fi
+  rm -f conf$$.sh
+fi
+
 # Support unset when possible.
 if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
   as_unset=unset
@@ -20593,8 +21667,43 @@
 fi
 
 
+# IFS
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent editors from complaining about space-tab.
+# (If _AS_PATH_WALK were called with IFS unset, it would disable word
+# splitting by setting IFS to empty value.)
+as_nl='
+'
+IFS=" ""	$as_nl"
+
+# Find who we are.  Look in the path if we contain no directory separator.
+case $0 in
+  *[\\/]* ) as_myself=$0 ;;
+  *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
+for as_dir in $PATH
+do
+  IFS=$as_save_IFS
+  test -z "$as_dir" && as_dir=.
+  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
+done
+IFS=$as_save_IFS
+
+     ;;
+esac
+# We did not find ourselves, most probably we were run as `sh COMMAND'
+# in which case we are not to be found in the path.
+if test "x$as_myself" = x; then
+  as_myself=$0
+fi
+if test ! -f "$as_myself"; then
+  echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
+  { (exit 1); exit 1; }
+fi
+
 # Work around bugs in pre-3.0 UWIN ksh.
-$as_unset ENV MAIL MAILPATH
+for as_var in ENV MAIL MAILPATH
+do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
+done
 PS1='$ '
 PS2='> '
 PS4='+ '
@@ -20608,18 +21717,19 @@
   if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
     eval $as_var=C; export $as_var
   else
-    $as_unset $as_var
+    ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
   fi
 done
 
 # Required to use basename.
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then
+if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
   as_basename=basename
 else
   as_basename=false
@@ -20627,159 +21737,120 @@
 
 
 # Name of the executable.
-as_me=`$as_basename "$0" ||
+as_me=`$as_basename -- "$0" ||
 $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
 	 X"$0" : 'X\(//\)$' \| \
-	 X"$0" : 'X\(/\)$' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$0" : 'X\(/\)' \| . 2>/dev/null ||
 echo X/"$0" |
-    sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; }
-  	  /^X\/\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\/\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-
+    sed '/^.*\/\([^/][^/]*\)\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\/\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
 
-# PATH needs CR, and LINENO needs CR and PATH.
-# Avoid depending upon Character Ranges.
-as_cr_letters='abcdefghijklmnopqrstuvwxyz'
-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
-as_cr_Letters=$as_cr_letters$as_cr_LETTERS
-as_cr_digits='0123456789'
-as_cr_alnum=$as_cr_Letters$as_cr_digits
-
-# The user is always right.
-if test "${PATH_SEPARATOR+set}" != set; then
-  echo "#! /bin/sh" >conf$$.sh
-  echo  "exit 0"   >>conf$$.sh
-  chmod +x conf$$.sh
-  if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
-    PATH_SEPARATOR=';'
-  else
-    PATH_SEPARATOR=:
-  fi
-  rm -f conf$$.sh
-fi
+# CDPATH.
+$as_unset CDPATH
 
 
-  as_lineno_1=$LINENO
-  as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
-  test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2"  || {
-  # Find who we are.  Look in the path if we contain no path at all
-  # relative or not.
-  case $0 in
-    *[\\/]* ) as_myself=$0 ;;
-    *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
-done
 
-       ;;
-  esac
-  # We did not find ourselves, most probably we were run as `sh COMMAND'
-  # in which case we are not to be found in the path.
-  if test "x$as_myself" = x; then
-    as_myself=$0
-  fi
-  if test ! -f "$as_myself"; then
-    { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5
-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;}
-   { (exit 1); exit 1; }; }
-  fi
-  case $CONFIG_SHELL in
-  '')
-    as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
-do
-  IFS=$as_save_IFS
-  test -z "$as_dir" && as_dir=.
-  for as_base in sh bash ksh sh5; do
-	 case $as_dir in
-	 /*)
-	   if ("$as_dir/$as_base" -c '
   as_lineno_1=$LINENO
   as_lineno_2=$LINENO
-  as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null`
   test "x$as_lineno_1" != "x$as_lineno_2" &&
-  test "x$as_lineno_3"  = "x$as_lineno_2" ') 2>/dev/null; then
-	     $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; }
-	     $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; }
-	     CONFIG_SHELL=$as_dir/$as_base
-	     export CONFIG_SHELL
-	     exec "$CONFIG_SHELL" "$0" ${1+"$@"}
-	   fi;;
-	 esac
-       done
-done
-;;
-  esac
+  test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
 
   # Create $as_me.lineno as a copy of $as_myself, but with $LINENO
   # uniformly replaced by the line number.  The first 'sed' inserts a
-  # line-number line before each line; the second 'sed' does the real
-  # work.  The second script uses 'N' to pair each line-number line
-  # with the numbered line, and appends trailing '-' during
-  # substitution so that $LINENO is not a special case at line end.
+  # line-number line after each line using $LINENO; the second 'sed'
+  # does the real work.  The second script uses 'N' to pair each
+  # line-number line with the line containing $LINENO, and appends
+  # trailing '-' during substitution so that $LINENO is not a special
+  # case at line end.
   # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
-  # second 'sed' script.  Blame Lee E. McMahon for sed's syntax.  :-)
-  sed '=' <$as_myself |
+  # scripts with optimization help from Paolo Bonzini.  Blame Lee
+  # E. McMahon (1931-1989) for sed's syntax.  :-)
+  sed -n '
+    p
+    /[$]LINENO/=
+  ' <$as_myself |
     sed '
+      s/[$]LINENO.*/&-/
+      t lineno
+      b
+      :lineno
       N
-      s,$,-,
-      : loop
-      s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3,
+      :loop
+      s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
       t loop
-      s,-$,,
-      s,^['$as_cr_digits']*\n,,
+      s/-\n.*//
     ' >$as_me.lineno &&
-  chmod +x $as_me.lineno ||
-    { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5
-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;}
+  chmod +x "$as_me.lineno" ||
+    { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
    { (exit 1); exit 1; }; }
 
   # Don't try to exec as it changes $[0], causing all sort of problems
   # (the dirname of $[0] is not the place where we might find the
-  # original and so on.  Autoconf is especially sensible to this).
-  . ./$as_me.lineno
+  # original and so on.  Autoconf is especially sensitive to this).
+  . "./$as_me.lineno"
   # Exit status is that of the last command.
   exit
 }
 
 
-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in
-  *c*,-n*) ECHO_N= ECHO_C='
-' ECHO_T='	' ;;
-  *c*,*  ) ECHO_N=-n ECHO_C= ECHO_T= ;;
-  *)       ECHO_N= ECHO_C='\c' ECHO_T= ;;
+if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
+  as_dirname=dirname
+else
+  as_dirname=false
+fi
+
+ECHO_C= ECHO_N= ECHO_T=
+case `echo -n x` in
+-n*)
+  case `echo 'x\c'` in
+  *c*) ECHO_T='	';;	# ECHO_T is single tab character.
+  *)   ECHO_C='\c';;
+  esac;;
+*)
+  ECHO_N='-n';;
 esac
 
-if expr a : '\(a\)' >/dev/null 2>&1; then
+if expr a : '\(a\)' >/dev/null 2>&1 &&
+   test "X`expr 00001 : '.*\(...\)'`" = X001; then
   as_expr=expr
 else
   as_expr=false
 fi
 
 rm -f conf$$ conf$$.exe conf$$.file
+if test -d conf$$.dir; then
+  rm -f conf$$.dir/conf$$.file
+else
+  rm -f conf$$.dir
+  mkdir conf$$.dir
+fi
 echo >conf$$.file
 if ln -s conf$$.file conf$$ 2>/dev/null; then
-  # We could just check for DJGPP; but this test a) works b) is more generic
-  # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04).
-  if test -f conf$$.exe; then
-    # Don't use ln at all; we don't have any links
+  as_ln_s='ln -s'
+  # ... but there are two gotchas:
+  # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
+  # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
+  # In both cases, we have to default to `cp -p'.
+  ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
     as_ln_s='cp -p'
-  else
-    as_ln_s='ln -s'
-  fi
 elif ln conf$$.file conf$$ 2>/dev/null; then
   as_ln_s=ln
 else
   as_ln_s='cp -p'
 fi
-rm -f conf$$ conf$$.exe conf$$.file
+rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
+rmdir conf$$.dir 2>/dev/null
 
 if mkdir -p . 2>/dev/null; then
   as_mkdir_p=:
@@ -20788,7 +21859,19 @@
   as_mkdir_p=false
 fi
 
-as_executable_p="test -f"
+# Find out whether ``test -x'' works.  Don't use a zero-byte file, as
+# systems may use methods other than mode bits to determine executability.
+cat >conf$$.file <<_ASEOF
+#! /bin/sh
+exit 0
+_ASEOF
+chmod +x conf$$.file
+if test -x conf$$.file >/dev/null 2>&1; then
+  as_executable_p="test -x"
+else
+  as_executable_p=:
+fi
+rm -f conf$$.file
 
 # Sed expression to map a string onto a valid CPP name.
 as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
@@ -20797,31 +21880,14 @@
 as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
 
 
-# IFS
-# We need space, tab and new line, in precisely that order.
-as_nl='
-'
-IFS=" 	$as_nl"
-
-# CDPATH.
-$as_unset CDPATH
-
 exec 6>&1
 
-# Open the log real soon, to keep \$[0] and so on meaningful, and to
+# Save the log message, to keep $[0] and so on meaningful, and to
 # report actual input values of CONFIG_FILES etc. instead of their
-# values after options handling.  Logging --version etc. is OK.
-exec 5>>config.log
-{
-  echo
-  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
-## Running $as_me. ##
-_ASBOX
-} >&5
-cat >&5 <<_CSEOF
-
+# values after options handling.
+ac_log="
 This file was extended by xf86-video-nv $as_me 1.2.0, which was
-generated by GNU Autoconf 2.59.  Invocation command line was
+generated by GNU Autoconf 2.60.  Invocation command line was
 
   CONFIG_FILES    = $CONFIG_FILES
   CONFIG_HEADERS  = $CONFIG_HEADERS
@@ -20829,30 +21895,20 @@
   CONFIG_COMMANDS = $CONFIG_COMMANDS
   $ $0 $@
 
-_CSEOF
-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5
-echo >&5
+on `(hostname || uname -n) 2>/dev/null | sed 1q`
+"
+
 _ACEOF
 
+cat >>$CONFIG_STATUS <<_ACEOF
 # Files that config.status was made for.
-if test -n "$ac_config_files"; then
-  echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_headers"; then
-  echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS
-fi
+config_files="$ac_config_files"
+config_headers="$ac_config_headers"
+config_commands="$ac_config_commands"
 
-if test -n "$ac_config_links"; then
-  echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS
-fi
-
-if test -n "$ac_config_commands"; then
-  echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS
-fi
+_ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
-
 ac_cs_usage="\
 \`$as_me' instantiates files from templates according to the
 current configuration.
@@ -20879,19 +21935,21 @@
 $config_commands
 
 Report bugs to <bug-autoconf@gnu.org>."
-_ACEOF
 
+_ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 ac_cs_version="\\
 xf86-video-nv config.status 1.2.0
-configured by $0, generated by GNU Autoconf 2.59,
-  with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\"
+configured by $0, generated by GNU Autoconf 2.60,
+  with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
 
-Copyright (C) 2003 Free Software Foundation, Inc.
+Copyright (C) 2006 Free Software Foundation, Inc.
 This config.status script is free software; the Free Software Foundation
 gives unlimited permission to copy, distribute and modify it."
-srcdir=$srcdir
-INSTALL="$INSTALL"
+
+ac_pwd='$ac_pwd'
+srcdir='$srcdir'
+INSTALL='$INSTALL'
 _ACEOF
 
 cat >>$CONFIG_STATUS <<\_ACEOF
@@ -20902,39 +21960,24 @@
 do
   case $1 in
   --*=*)
-    ac_option=`expr "x$1" : 'x\([^=]*\)='`
-    ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'`
+    ac_option=`expr "X$1" : 'X\([^=]*\)='`
+    ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
     ac_shift=:
     ;;
-  -*)
+  *)
     ac_option=$1
     ac_optarg=$2
     ac_shift=shift
     ;;
-  *) # This is not an option, so the user has probably given explicit
-     # arguments.
-     ac_option=$1
-     ac_need_defaults=false;;
   esac
 
   case $ac_option in
   # Handling of the options.
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
   -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
     ac_cs_recheck=: ;;
-  --version | --vers* | -V )
-    echo "$ac_cs_version"; exit 0 ;;
-  --he | --h)
-    # Conflict between --help and --header
-    { { echo "$as_me:$LINENO: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: ambiguous option: $1
-Try \`$0 --help' for more information." >&2;}
-   { (exit 1); exit 1; }; };;
-  --help | --hel | -h )
-    echo "$ac_cs_usage"; exit 0 ;;
-  --debug | --d* | -d )
+  --version | --versio | --versi | --vers | --ver | --ve | --v | -V )
+    echo "$ac_cs_version"; exit ;;
+  --debug | --debu | --deb | --de | --d | -d )
     debug=: ;;
   --file | --fil | --fi | --f )
     $ac_shift
@@ -20944,18 +21987,24 @@
     $ac_shift
     CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
     ac_need_defaults=false;;
+  --he | --h)
+    # Conflict between --help and --header
+    { echo "$as_me: error: ambiguous option: $1
+Try \`$0 --help' for more information." >&2
+   { (exit 1); exit 1; }; };;
+  --help | --hel | -h )
+    echo "$ac_cs_usage"; exit ;;
   -q | -quiet | --quiet | --quie | --qui | --qu | --q \
   | -silent | --silent | --silen | --sile | --sil | --si | --s)
     ac_cs_silent=: ;;
 
   # This is an error.
-  -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&5
-echo "$as_me: error: unrecognized option: $1
-Try \`$0 --help' for more information." >&2;}
+  -*) { echo "$as_me: error: unrecognized option: $1
+Try \`$0 --help' for more information." >&2
    { (exit 1); exit 1; }; } ;;
 
-  *) ac_config_targets="$ac_config_targets $1" ;;
+  *) ac_config_targets="$ac_config_targets $1"
+     ac_need_defaults=false ;;
 
   esac
   shift
@@ -20971,39 +22020,51 @@
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 if \$ac_cs_recheck; then
-  echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
-  exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
+  echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
+  CONFIG_SHELL=$SHELL
+  export CONFIG_SHELL
+  exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
 fi
 
 _ACEOF
+cat >>$CONFIG_STATUS <<\_ACEOF
+exec 5>>config.log
+{
+  echo
+  sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
+## Running $as_me. ##
+_ASBOX
+  echo "$ac_log"
+} >&5
 
+_ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
 #
-# INIT-COMMANDS section.
+# INIT-COMMANDS
 #
-
 AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
 
 _ACEOF
 
-
-
 cat >>$CONFIG_STATUS <<\_ACEOF
+
+# Handling of arguments.
 for ac_config_target in $ac_config_targets
 do
-  case "$ac_config_target" in
-  # Handling of arguments.
-  "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;;
-  "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
-  "man/Makefile" ) CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
-  "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
-  "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+  case $ac_config_target in
+    "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
+    "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
+    "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
+    "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
+    "man/Makefile") CONFIG_FILES="$CONFIG_FILES man/Makefile" ;;
+
   *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5
 echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
    { (exit 1); exit 1; }; };;
   esac
 done
 
+
 # If the user did not use the arguments to specify the items to instantiate,
 # then the envvar interface is used.  Set only those that are not.
 # We use the long form for the default assignment because of an extremely
@@ -21015,621 +22076,608 @@
 fi
 
 # Have a temporary directory for convenience.  Make it in the build tree
-# simply because there is no reason to put it here, and in addition,
+# simply because there is no reason against having it here, and in addition,
 # creating and moving files from /tmp can sometimes cause problems.
-# Create a temporary directory, and hook for its removal unless debugging.
+# Hook for its removal unless debugging.
+# Note that there is a small window in which the directory will not be cleaned:
+# after its creation but before its name has been assigned to `$tmp'.
 $debug ||
 {
-  trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0
+  tmp=
+  trap 'exit_status=$?
+  { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
+' 0
   trap '{ (exit 1); exit 1; }' 1 2 13 15
 }
-
 # Create a (secure) tmp directory for tmp files.
 
 {
-  tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` &&
+  tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
   test -n "$tmp" && test -d "$tmp"
 }  ||
 {
-  tmp=./confstat$$-$RANDOM
-  (umask 077 && mkdir $tmp)
+  tmp=./conf$$-$RANDOM
+  (umask 077 && mkdir "$tmp")
 } ||
 {
    echo "$me: cannot create a temporary directory in ." >&2
    { (exit 1); exit 1; }
 }
 
-_ACEOF
-
-cat >>$CONFIG_STATUS <<_ACEOF
-
 #
-# CONFIG_FILES section.
+# Set up the sed scripts for CONFIG_FILES section.
 #
 
 # No need to generate the scripts if there are no CONFIG_FILES.
 # This happens for instance when ./config.status config.h
-if test -n "\$CONFIG_FILES"; then
-  # Protect against being on the right side of a sed subst in config.status.
-  sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g;
-   s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF
-s,@SHELL@,$SHELL,;t t
-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t
-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t
-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t
-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t
-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t
-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t
-s,@exec_prefix@,$exec_prefix,;t t
-s,@prefix@,$prefix,;t t
-s,@program_transform_name@,$program_transform_name,;t t
-s,@bindir@,$bindir,;t t
-s,@sbindir@,$sbindir,;t t
-s,@libexecdir@,$libexecdir,;t t
-s,@datadir@,$datadir,;t t
-s,@sysconfdir@,$sysconfdir,;t t
-s,@sharedstatedir@,$sharedstatedir,;t t
-s,@localstatedir@,$localstatedir,;t t
-s,@libdir@,$libdir,;t t
-s,@includedir@,$includedir,;t t
-s,@oldincludedir@,$oldincludedir,;t t
-s,@infodir@,$infodir,;t t
-s,@mandir@,$mandir,;t t
-s,@build_alias@,$build_alias,;t t
-s,@host_alias@,$host_alias,;t t
-s,@target_alias@,$target_alias,;t t
-s,@DEFS@,$DEFS,;t t
-s,@ECHO_C@,$ECHO_C,;t t
-s,@ECHO_N@,$ECHO_N,;t t
-s,@ECHO_T@,$ECHO_T,;t t
-s,@LIBS@,$LIBS,;t t
-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t
-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t
-s,@INSTALL_DATA@,$INSTALL_DATA,;t t
-s,@CYGPATH_W@,$CYGPATH_W,;t t
-s,@PACKAGE@,$PACKAGE,;t t
-s,@VERSION@,$VERSION,;t t
-s,@ACLOCAL@,$ACLOCAL,;t t
-s,@AUTOCONF@,$AUTOCONF,;t t
-s,@AUTOMAKE@,$AUTOMAKE,;t t
-s,@AUTOHEADER@,$AUTOHEADER,;t t
-s,@MAKEINFO@,$MAKEINFO,;t t
-s,@install_sh@,$install_sh,;t t
-s,@STRIP@,$STRIP,;t t
-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t
-s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t
-s,@mkdir_p@,$mkdir_p,;t t
-s,@AWK@,$AWK,;t t
-s,@SET_MAKE@,$SET_MAKE,;t t
-s,@am__leading_dot@,$am__leading_dot,;t t
-s,@AMTAR@,$AMTAR,;t t
-s,@am__tar@,$am__tar,;t t
-s,@am__untar@,$am__untar,;t t
-s,@MAINTAINER_MODE_TRUE@,$MAINTAINER_MODE_TRUE,;t t
-s,@MAINTAINER_MODE_FALSE@,$MAINTAINER_MODE_FALSE,;t t
-s,@MAINT@,$MAINT,;t t
-s,@build@,$build,;t t
-s,@build_cpu@,$build_cpu,;t t
-s,@build_vendor@,$build_vendor,;t t
-s,@build_os@,$build_os,;t t
-s,@host@,$host,;t t
-s,@host_cpu@,$host_cpu,;t t
-s,@host_vendor@,$host_vendor,;t t
-s,@host_os@,$host_os,;t t
-s,@CC@,$CC,;t t
-s,@CFLAGS@,$CFLAGS,;t t
-s,@LDFLAGS@,$LDFLAGS,;t t
-s,@CPPFLAGS@,$CPPFLAGS,;t t
-s,@ac_ct_CC@,$ac_ct_CC,;t t
-s,@EXEEXT@,$EXEEXT,;t t
-s,@OBJEXT@,$OBJEXT,;t t
-s,@DEPDIR@,$DEPDIR,;t t
-s,@am__include@,$am__include,;t t
-s,@am__quote@,$am__quote,;t t
-s,@AMDEP_TRUE@,$AMDEP_TRUE,;t t
-s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t
-s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t
-s,@CCDEPMODE@,$CCDEPMODE,;t t
-s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t
-s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t
-s,@EGREP@,$EGREP,;t t
-s,@LN_S@,$LN_S,;t t
-s,@ECHO@,$ECHO,;t t
-s,@AR@,$AR,;t t
-s,@ac_ct_AR@,$ac_ct_AR,;t t
-s,@RANLIB@,$RANLIB,;t t
-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t
-s,@CPP@,$CPP,;t t
-s,@CXX@,$CXX,;t t
-s,@CXXFLAGS@,$CXXFLAGS,;t t
-s,@ac_ct_CXX@,$ac_ct_CXX,;t t
-s,@CXXDEPMODE@,$CXXDEPMODE,;t t
-s,@am__fastdepCXX_TRUE@,$am__fastdepCXX_TRUE,;t t
-s,@am__fastdepCXX_FALSE@,$am__fastdepCXX_FALSE,;t t
-s,@CXXCPP@,$CXXCPP,;t t
-s,@F77@,$F77,;t t
-s,@FFLAGS@,$FFLAGS,;t t
-s,@ac_ct_F77@,$ac_ct_F77,;t t
-s,@LIBTOOL@,$LIBTOOL,;t t
-s,@PKG_CONFIG@,$PKG_CONFIG,;t t
-s,@ac_pt_PKG_CONFIG@,$ac_pt_PKG_CONFIG,;t t
-s,@XORG_CFLAGS@,$XORG_CFLAGS,;t t
-s,@XORG_LIBS@,$XORG_LIBS,;t t
-s,@moduledir@,$moduledir,;t t
-s,@DRIVER_NAME@,$DRIVER_NAME,;t t
-s,@APP_MAN_SUFFIX@,$APP_MAN_SUFFIX,;t t
-s,@LIB_MAN_SUFFIX@,$LIB_MAN_SUFFIX,;t t
-s,@FILE_MAN_SUFFIX@,$FILE_MAN_SUFFIX,;t t
-s,@MISC_MAN_SUFFIX@,$MISC_MAN_SUFFIX,;t t
-s,@DRIVER_MAN_SUFFIX@,$DRIVER_MAN_SUFFIX,;t t
-s,@ADMIN_MAN_SUFFIX@,$ADMIN_MAN_SUFFIX,;t t
-s,@APP_MAN_DIR@,$APP_MAN_DIR,;t t
-s,@LIB_MAN_DIR@,$LIB_MAN_DIR,;t t
-s,@FILE_MAN_DIR@,$FILE_MAN_DIR,;t t
-s,@MISC_MAN_DIR@,$MISC_MAN_DIR,;t t
-s,@DRIVER_MAN_DIR@,$DRIVER_MAN_DIR,;t t
-s,@ADMIN_MAN_DIR@,$ADMIN_MAN_DIR,;t t
-s,@LIBOBJS@,$LIBOBJS,;t t
-s,@LTLIBOBJS@,$LTLIBOBJS,;t t
-CEOF
-
-_ACEOF
-
-  cat >>$CONFIG_STATUS <<\_ACEOF
-  # Split the substitutions into bite-sized pieces for seds with
-  # small command number limits, like on Digital OSF/1 and HP-UX.
-  ac_max_sed_lines=48
-  ac_sed_frag=1 # Number of current file.
-  ac_beg=1 # First line for current file.
-  ac_end=$ac_max_sed_lines # Line after last line for current file.
-  ac_more_lines=:
-  ac_sed_cmds=
-  while $ac_more_lines; do
-    if test $ac_beg -gt 1; then
-      sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    else
-      sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag
-    fi
-    if test ! -s $tmp/subs.frag; then
-      ac_more_lines=false
-    else
-      # The purpose of the label and of the branching condition is to
-      # speed up the sed processing (if there are no `@' at all, there
-      # is no need to browse any of the substitutions).
-      # These are the two extra sed commands mentioned above.
-      (echo ':t
-  /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed
-      if test -z "$ac_sed_cmds"; then
-	ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed"
-      else
-	ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed"
-      fi
-      ac_sed_frag=`expr $ac_sed_frag + 1`
-      ac_beg=$ac_end
-      ac_end=`expr $ac_end + $ac_max_sed_lines`
-    fi
-  done
-  if test -z "$ac_sed_cmds"; then
-    ac_sed_cmds=cat
+if test -n "$CONFIG_FILES"; then
+
+_ACEOF
+
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  cat >conf$$subs.sed <<_ACEOF
+SHELL!$SHELL$ac_delim
+PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
+PACKAGE_NAME!$PACKAGE_NAME$ac_delim
+PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
+PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
+PACKAGE_STRING!$PACKAGE_STRING$ac_delim
+PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
+exec_prefix!$exec_prefix$ac_delim
+prefix!$prefix$ac_delim
+program_transform_name!$program_transform_name$ac_delim
+bindir!$bindir$ac_delim
+sbindir!$sbindir$ac_delim
+libexecdir!$libexecdir$ac_delim
+datarootdir!$datarootdir$ac_delim
+datadir!$datadir$ac_delim
+sysconfdir!$sysconfdir$ac_delim
+sharedstatedir!$sharedstatedir$ac_delim
+localstatedir!$localstatedir$ac_delim
+includedir!$includedir$ac_delim
+oldincludedir!$oldincludedir$ac_delim
+docdir!$docdir$ac_delim
+infodir!$infodir$ac_delim
+htmldir!$htmldir$ac_delim
+dvidir!$dvidir$ac_delim
+pdfdir!$pdfdir$ac_delim
+psdir!$psdir$ac_delim
+libdir!$libdir$ac_delim
+localedir!$localedir$ac_delim
+mandir!$mandir$ac_delim
+DEFS!$DEFS$ac_delim
+ECHO_C!$ECHO_C$ac_delim
+ECHO_N!$ECHO_N$ac_delim
+ECHO_T!$ECHO_T$ac_delim
+LIBS!$LIBS$ac_delim
+build_alias!$build_alias$ac_delim
+host_alias!$host_alias$ac_delim
+target_alias!$target_alias$ac_delim
+INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
+INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
+INSTALL_DATA!$INSTALL_DATA$ac_delim
+CYGPATH_W!$CYGPATH_W$ac_delim
+PACKAGE!$PACKAGE$ac_delim
+VERSION!$VERSION$ac_delim
+ACLOCAL!$ACLOCAL$ac_delim
+AUTOCONF!$AUTOCONF$ac_delim
+AUTOMAKE!$AUTOMAKE$ac_delim
+AUTOHEADER!$AUTOHEADER$ac_delim
+MAKEINFO!$MAKEINFO$ac_delim
+install_sh!$install_sh$ac_delim
+STRIP!$STRIP$ac_delim
+INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
+mkdir_p!$mkdir_p$ac_delim
+AWK!$AWK$ac_delim
+SET_MAKE!$SET_MAKE$ac_delim
+am__leading_dot!$am__leading_dot$ac_delim
+AMTAR!$AMTAR$ac_delim
+am__tar!$am__tar$ac_delim
+am__untar!$am__untar$ac_delim
+MAINTAINER_MODE_TRUE!$MAINTAINER_MODE_TRUE$ac_delim
+MAINTAINER_MODE_FALSE!$MAINTAINER_MODE_FALSE$ac_delim
+MAINT!$MAINT$ac_delim
+build!$build$ac_delim
+build_cpu!$build_cpu$ac_delim
+build_vendor!$build_vendor$ac_delim
+build_os!$build_os$ac_delim
+host!$host$ac_delim
+host_cpu!$host_cpu$ac_delim
+host_vendor!$host_vendor$ac_delim
+host_os!$host_os$ac_delim
+CC!$CC$ac_delim
+CFLAGS!$CFLAGS$ac_delim
+LDFLAGS!$LDFLAGS$ac_delim
+CPPFLAGS!$CPPFLAGS$ac_delim
+ac_ct_CC!$ac_ct_CC$ac_delim
+EXEEXT!$EXEEXT$ac_delim
+OBJEXT!$OBJEXT$ac_delim
+DEPDIR!$DEPDIR$ac_delim
+am__include!$am__include$ac_delim
+am__quote!$am__quote$ac_delim
+AMDEP_TRUE!$AMDEP_TRUE$ac_delim
+AMDEP_FALSE!$AMDEP_FALSE$ac_delim
+AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
+CCDEPMODE!$CCDEPMODE$ac_delim
+am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
+am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
+GREP!$GREP$ac_delim
+EGREP!$EGREP$ac_delim
+LN_S!$LN_S$ac_delim
+ECHO!$ECHO$ac_delim
+AR!$AR$ac_delim
+RANLIB!$RANLIB$ac_delim
+CPP!$CPP$ac_delim
+CXX!$CXX$ac_delim
+CXXFLAGS!$CXXFLAGS$ac_delim
+ac_ct_CXX!$ac_ct_CXX$ac_delim
+CXXDEPMODE!$CXXDEPMODE$ac_delim
+am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
+_ACEOF
+
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
+    break
+  elif $ac_last_try; then
+    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
   fi
-fi # test -n "$CONFIG_FILES"
+done
 
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+  ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
 _ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+CEOF$ac_eof
+_ACEOF
+
+
+ac_delim='%!_!# '
+for ac_last_try in false false false false false :; do
+  cat >conf$$subs.sed <<_ACEOF
+am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
+CXXCPP!$CXXCPP$ac_delim
+F77!$F77$ac_delim
+FFLAGS!$FFLAGS$ac_delim
+ac_ct_F77!$ac_ct_F77$ac_delim
+LIBTOOL!$LIBTOOL$ac_delim
+PKG_CONFIG!$PKG_CONFIG$ac_delim
+XORG_CFLAGS!$XORG_CFLAGS$ac_delim
+XORG_LIBS!$XORG_LIBS$ac_delim
+moduledir!$moduledir$ac_delim
+DRIVER_NAME!$DRIVER_NAME$ac_delim
+APP_MAN_SUFFIX!$APP_MAN_SUFFIX$ac_delim
+LIB_MAN_SUFFIX!$LIB_MAN_SUFFIX$ac_delim
+FILE_MAN_SUFFIX!$FILE_MAN_SUFFIX$ac_delim
+MISC_MAN_SUFFIX!$MISC_MAN_SUFFIX$ac_delim
+DRIVER_MAN_SUFFIX!$DRIVER_MAN_SUFFIX$ac_delim
+ADMIN_MAN_SUFFIX!$ADMIN_MAN_SUFFIX$ac_delim
+APP_MAN_DIR!$APP_MAN_DIR$ac_delim
+LIB_MAN_DIR!$LIB_MAN_DIR$ac_delim
+FILE_MAN_DIR!$FILE_MAN_DIR$ac_delim
+MISC_MAN_DIR!$MISC_MAN_DIR$ac_delim
+DRIVER_MAN_DIR!$DRIVER_MAN_DIR$ac_delim
+ADMIN_MAN_DIR!$ADMIN_MAN_DIR$ac_delim
+LIBOBJS!$LIBOBJS$ac_delim
+LTLIBOBJS!$LTLIBOBJS$ac_delim
+_ACEOF
+
+  if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 25; then
+    break
+  elif $ac_last_try; then
+    { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5
+echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
+   { (exit 1); exit 1; }; }
+  else
+    ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
+  fi
+done
+
+ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
+if test -n "$ac_eof"; then
+  ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
+  ac_eof=`expr $ac_eof + 1`
+fi
+
+cat >>$CONFIG_STATUS <<_ACEOF
+cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
+/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
+_ACEOF
+sed '
+s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
+s/^/s,@/; s/!/@,|#_!!_#|/
+:n
+t n
+s/'"$ac_delim"'$/,g/; t
+s/$/\\/; p
+N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
+' >>$CONFIG_STATUS <conf$$subs.sed
+rm -f conf$$subs.sed
+cat >>$CONFIG_STATUS <<_ACEOF
+:end
+s/|#_!!_#|//g
+CEOF$ac_eof
+_ACEOF
+
+
+# VPATH may cause trouble with some makes, so we remove $(srcdir),
+# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
+# trailing colons and then remove the whole line if VPATH becomes empty
+# (actually we leave an empty line to preserve line numbers).
+if test "x$srcdir" = x.; then
+  ac_vpsub='/^[	 ]*VPATH[	 ]*=/{
+s/:*\$(srcdir):*/:/
+s/:*\${srcdir}:*/:/
+s/:*@srcdir@:*/:/
+s/^\([^=]*=[	 ]*\):*/\1/
+s/:*$//
+s/^[^=]*=[	 ]*$//
+}'
+fi
+
 cat >>$CONFIG_STATUS <<\_ACEOF
-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
-  case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
+fi # test -n "$CONFIG_FILES"
+
+
+for ac_tag in  :F $CONFIG_FILES  :H $CONFIG_HEADERS    :C $CONFIG_COMMANDS
+do
+  case $ac_tag in
+  :[FHLC]) ac_mode=$ac_tag; continue;;
+  esac
+  case $ac_mode$ac_tag in
+  :[FHL]*:*);;
+  :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5
+echo "$as_me: error: Invalid tag $ac_tag." >&2;}
+   { (exit 1); exit 1; }; };;
+  :[FH]-) ac_tag=-:-;;
+  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
+  esac
+  ac_save_IFS=$IFS
+  IFS=:
+  set x $ac_tag
+  IFS=$ac_save_IFS
+  shift
+  ac_file=$1
+  shift
+
+  case $ac_mode in
+  :L) ac_source=$1;;
+  :[FH])
+    ac_file_inputs=
+    for ac_f
+    do
+      case $ac_f in
+      -) ac_f="$tmp/stdin";;
+      *) # Look for the file first in the build tree, then in the source tree
+	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
+	 # because $ac_f cannot contain `:'.
+	 test -f "$ac_f" ||
+	   case $ac_f in
+	   [\\/$]*) false;;
+	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
+	   esac ||
+	   { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5
+echo "$as_me: error: cannot find input file: $ac_f" >&2;}
+   { (exit 1); exit 1; }; };;
+      esac
+      ac_file_inputs="$ac_file_inputs $ac_f"
+    done
+
+    # Let's still pretend it is `configure' which instantiates (i.e., don't
+    # use $as_me), people would be surprised to read:
+    #    /* config.h.  Generated by config.status.  */
+    configure_input="Generated from "`IFS=:
+	  echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
+    if test x"$ac_file" != x-; then
+      configure_input="$ac_file.  $configure_input"
+      { echo "$as_me:$LINENO: creating $ac_file" >&5
+echo "$as_me: creating $ac_file" >&6;}
+    fi
+
+    case $ac_tag in
+    *:-:* | *:-) cat >"$tmp/stdin";;
+    esac
+    ;;
   esac
 
-  # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories.
-  ac_dir=`(dirname "$ac_file") 2>/dev/null ||
+  ac_dir=`$as_dirname -- "$ac_file" ||
 $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$ac_file" : 'X\(//\)[^/]' \| \
 	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+  { as_dir="$ac_dir"
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
     as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
     done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
-
   ac_builddir=.
 
-if test "$ac_dir" != .; then
+case "$ac_dir" in
+.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
+*)
   ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
+  # A ".." for each directory in $ac_dir_suffix.
+  ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
+  case $ac_top_builddir_sub in
+  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
+  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
+  esac ;;
+esac
+ac_abs_top_builddir=$ac_pwd
+ac_abs_builddir=$ac_pwd$ac_dir_suffix
+# for backward compatibility:
+ac_top_builddir=$ac_top_build_prefix
 
 case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
+  .)  # We are building in place.
     ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
+    ac_top_srcdir=$ac_top_builddir_sub
+    ac_abs_top_srcdir=$ac_pwd ;;
+  [\\/]* | ?:[\\/]* )  # Absolute name.
     ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
+    ac_top_srcdir=$srcdir
+    ac_abs_top_srcdir=$srcdir ;;
+  *) # Relative name.
+    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
+    ac_top_srcdir=$ac_top_build_prefix$srcdir
+    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
 esac
+ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
 
+  case $ac_mode in
+  :F)
+  #
+  # CONFIG_FILE
+  #
 
   case $INSTALL in
   [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
-  *) ac_INSTALL=$ac_top_builddir$INSTALL ;;
+  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
   esac
+_ACEOF
 
-  if test x"$ac_file" != x-; then
-    { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-    rm -f "$ac_file"
-  fi
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    configure_input=
-  else
-    configure_input="$ac_file.  "
-  fi
-  configure_input=$configure_input"Generated from `echo $ac_file_in |
-				     sed 's,.*/,,'` by configure."
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
+cat >>$CONFIG_STATUS <<\_ACEOF
+# If the template does not know about datarootdir, expand it.
+# FIXME: This hack should be removed a few years after 2.60.
+ac_datarootdir_hack=; ac_datarootdir_seen=
+
+case `sed -n '/datarootdir/ {
+  p
+  q
+}
+/@datadir@/p
+/@docdir@/p
+/@infodir@/p
+/@localedir@/p
+/@mandir@/p
+' $ac_file_inputs` in
+*datarootdir*) ac_datarootdir_seen=yes;;
+*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
+  { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
+echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
 _ACEOF
 cat >>$CONFIG_STATUS <<_ACEOF
+  ac_datarootdir_hack='
+  s&@datadir@&$datadir&g
+  s&@docdir@&$docdir&g
+  s&@infodir@&$infodir&g
+  s&@localedir@&$localedir&g
+  s&@mandir@&$mandir&g
+    s&\\\${datarootdir}&$datarootdir&g' ;;
+esac
+_ACEOF
+
+# Neutralize VPATH when `$srcdir' = `.'.
+# Shell code in configure.ac might set extrasub.
+# FIXME: do we really want to maintain this feature?
+cat >>$CONFIG_STATUS <<_ACEOF
   sed "$ac_vpsub
 $extrasub
 _ACEOF
 cat >>$CONFIG_STATUS <<\_ACEOF
 :t
 /@[a-zA-Z_][a-zA-Z_0-9]*@/!b
-s,@configure_input@,$configure_input,;t t
-s,@srcdir@,$ac_srcdir,;t t
-s,@abs_srcdir@,$ac_abs_srcdir,;t t
-s,@top_srcdir@,$ac_top_srcdir,;t t
-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t
-s,@builddir@,$ac_builddir,;t t
-s,@abs_builddir@,$ac_abs_builddir,;t t
-s,@top_builddir@,$ac_top_builddir,;t t
-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t
-s,@INSTALL@,$ac_INSTALL,;t t
-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out
-  rm -f $tmp/stdin
-  if test x"$ac_file" != x-; then
-    mv $tmp/out $ac_file
-  else
-    cat $tmp/out
-    rm -f $tmp/out
-  fi
+s&@configure_input@&$configure_input&;t t
+s&@top_builddir@&$ac_top_builddir_sub&;t t
+s&@srcdir@&$ac_srcdir&;t t
+s&@abs_srcdir@&$ac_abs_srcdir&;t t
+s&@top_srcdir@&$ac_top_srcdir&;t t
+s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
+s&@builddir@&$ac_builddir&;t t
+s&@abs_builddir@&$ac_abs_builddir&;t t
+s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
+s&@INSTALL@&$ac_INSTALL&;t t
+$ac_datarootdir_hack
+" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out
+
+test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
+  { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
+  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
+  { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&5
+echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
+which seems to be undefined.  Please make sure it is defined." >&2;}
 
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_HEADER section.
-#
-
-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where
-# NAME is the cpp macro being defined and VALUE is the value it is being given.
-#
-# ac_d sets the value in "#define NAME VALUE" lines.
-ac_dA='s,^\([	 ]*\)#\([	 ]*define[	 ][	 ]*\)'
-ac_dB='[	 ].*$,\1#\2'
-ac_dC=' '
-ac_dD=',;t'
-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE".
-ac_uA='s,^\([	 ]*\)#\([	 ]*\)undef\([	 ][	 ]*\)'
-ac_uB='$,\1#\2define\3'
-ac_uC=' '
-ac_uD=',;t'
-
-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue
-  # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+  rm -f "$tmp/stdin"
   case $ac_file in
-  - | *:- | *:-:* ) # input from stdin
-	cat >$tmp/stdin
-	ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'`
-	ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;;
-  * )   ac_file_in=$ac_file.in ;;
+  -) cat "$tmp/out"; rm -f "$tmp/out";;
+  *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
   esac
-
-  test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5
-echo "$as_me: creating $ac_file" >&6;}
-
-  # First look for the input files in the build tree, otherwise in the
-  # src tree.
-  ac_file_inputs=`IFS=:
-    for f in $ac_file_in; do
-      case $f in
-      -) echo $tmp/stdin ;;
-      [\\/$]*)
-	 # Absolute (can't be DOS-style, as IFS=:)
-	 test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 # Do quote $f, to prevent DOS paths from being IFS'd.
-	 echo "$f";;
-      *) # Relative
-	 if test -f "$f"; then
-	   # Build tree
-	   echo "$f"
-	 elif test -f "$srcdir/$f"; then
-	   # Source tree
-	   echo "$srcdir/$f"
-	 else
-	   # /dev/null tree
-	   { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5
-echo "$as_me: error: cannot find input file: $f" >&2;}
-   { (exit 1); exit 1; }; }
-	 fi;;
-      esac
-    done` || { (exit 1); exit 1; }
-  # Remove the trailing spaces.
-  sed 's/[	 ]*$//' $ac_file_inputs >$tmp/in
-
+ ;;
+  :H)
+  #
+  # CONFIG_HEADER
+  #
 _ACEOF
 
-# Transform confdefs.h into two sed scripts, `conftest.defines' and
-# `conftest.undefs', that substitutes the proper values into
-# config.h.in to produce config.h.  The first handles `#define'
-# templates, and the second `#undef' templates.
-# And first: Protect against being on the right side of a sed subst in
-# config.status.  Protect against being in an unquoted here document
-# in config.status.
-rm -f conftest.defines conftest.undefs
-# Using a here document instead of a string reduces the quoting nightmare.
-# Putting comments in sed scripts is not portable.
-#
-# `end' is used to avoid that the second main sed command (meant for
-# 0-ary CPP macros) applies to n-ary macro definitions.
-# See the Autoconf documentation for `clear'.
-cat >confdef2sed.sed <<\_ACEOF
-s/[\\&,]/\\&/g
-s,[\\$`],\\&,g
-t clear
-: clear
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 (][^	 (]*\)\(([^)]*)\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp
-t end
-s,^[	 ]*#[	 ]*define[	 ][	 ]*\([^	 ][^	 ]*\)[	 ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp
-: end
-_ACEOF
-# If some macros were called several times there might be several times
-# the same #defines, which is useless.  Nevertheless, we may not want to
-# sort them, since we want the *last* AC-DEFINE to be honored.
-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines
-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs
-rm -f confdef2sed.sed
+# Transform confdefs.h into a sed script `conftest.defines', that
+# substitutes the proper values into config.h.in to produce config.h.
+rm -f conftest.defines conftest.tail
+# First, append a space to every undef/define line, to ease matching.
+echo 's/$/ /' >conftest.defines
+# Then, protect against being on the right side of a sed subst, or in
+# an unquoted here document, in config.status.  If some macros were
+# called several times there might be several #defines for the same
+# symbol, which is useless.  But do not sort them, since the last
+# AC_DEFINE must be honored.
+ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
+# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
+# NAME is the cpp macro being defined, VALUE is the value it is being given.
+# PARAMS is the parameter list in the macro definition--in most cases, it's
+# just an empty string.
+ac_dA='s,^\\([	 #]*\\)[^	 ]*\\([	 ]*'
+ac_dB='\\)[	 (].*,\\1define\\2'
+ac_dC=' '
+ac_dD=' ,'
 
-# This sed command replaces #undef with comments.  This is necessary, for
+uniq confdefs.h |
+  sed -n '
+	t rset
+	:rset
+	s/^[	 ]*#[	 ]*define[	 ][	 ]*//
+	t ok
+	d
+	:ok
+	s/[\\&,]/\\&/g
+	s/^\('"$ac_word_re"'\)\(([^()]*)\)[	 ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
+	s/^\('"$ac_word_re"'\)[	 ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
+  ' >>conftest.defines
+
+# Remove the space that was appended to ease matching.
+# Then replace #undef with comments.  This is necessary, for
 # example, in the case of _POSIX_SOURCE, which is predefined and required
 # on some systems where configure will not decide to define it.
-cat >>conftest.undefs <<\_ACEOF
-s,^[	 ]*#[	 ]*undef[	 ][	 ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */,
-_ACEOF
+# (The regexp can be short, since the line contains either #define or #undef.)
+echo 's/ $//
+s,^[	 #]*u.*,/* & */,' >>conftest.defines
+
+# Break up conftest.defines:
+ac_max_sed_lines=50
+
+# First sed command is:	 sed -f defines.sed $ac_file_inputs >"$tmp/out1"
+# Second one is:	 sed -f defines.sed "$tmp/out1" >"$tmp/out2"
+# Third one will be:	 sed -f defines.sed "$tmp/out2" >"$tmp/out1"
+# et cetera.
+ac_in='$ac_file_inputs'
+ac_out='"$tmp/out1"'
+ac_nxt='"$tmp/out2"'
 
-# Break up conftest.defines because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS
-echo '  if grep "^[	 ]*#[	 ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS
-echo '  # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS
-echo '  :' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.defines >/dev/null
+while :
 do
-  # Write a limited-size here document to $tmp/defines.sed.
-  echo '  cat >$tmp/defines.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#define' lines.
-  echo '/^[	 ]*#[	 ]*define/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS
+  # Write a here document:
+    cat >>$CONFIG_STATUS <<_ACEOF
+    # First, check the format of the line:
+    cat >"\$tmp/defines.sed" <<\\CEOF
+/^[	 ]*#[	 ]*undef[	 ][	 ]*$ac_word_re[	 ]*\$/b def
+/^[	 ]*#[	 ]*define[	 ][	 ]*$ac_word_re[(	 ]/b def
+b
+:def
+_ACEOF
+  sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
   echo 'CEOF
-  sed -f $tmp/defines.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail
+    sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
+  ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
+  sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
+  grep . conftest.tail >/dev/null || break
   rm -f conftest.defines
   mv conftest.tail conftest.defines
 done
-rm -f conftest.defines
-echo '  fi # grep' >>$CONFIG_STATUS
-echo >>$CONFIG_STATUS
-
-# Break up conftest.undefs because some shells have a limit on the size
-# of here documents, and old seds have small limits too (100 cmds).
-echo '  # Handle all the #undef templates' >>$CONFIG_STATUS
-rm -f conftest.tail
-while grep . conftest.undefs >/dev/null
-do
-  # Write a limited-size here document to $tmp/undefs.sed.
-  echo '  cat >$tmp/undefs.sed <<CEOF' >>$CONFIG_STATUS
-  # Speed up: don't consider the non `#undef'
-  echo '/^[	 ]*#[	 ]*undef/!b' >>$CONFIG_STATUS
-  # Work around the forget-to-reset-the-flag bug.
-  echo 't clr' >>$CONFIG_STATUS
-  echo ': clr' >>$CONFIG_STATUS
-  sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS
-  echo 'CEOF
-  sed -f $tmp/undefs.sed $tmp/in >$tmp/out
-  rm -f $tmp/in
-  mv $tmp/out $tmp/in
-' >>$CONFIG_STATUS
-  sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail
-  rm -f conftest.undefs
-  mv conftest.tail conftest.undefs
-done
-rm -f conftest.undefs
+rm -f conftest.defines conftest.tail
 
+echo "ac_result=$ac_in" >>$CONFIG_STATUS
 cat >>$CONFIG_STATUS <<\_ACEOF
-  # Let's still pretend it is `configure' which instantiates (i.e., don't
-  # use $as_me), people would be surprised to read:
-  #    /* config.h.  Generated by config.status.  */
-  if test x"$ac_file" = x-; then
-    echo "/* Generated by configure.  */" >$tmp/config.h
-  else
-    echo "/* $ac_file.  Generated by configure.  */" >$tmp/config.h
-  fi
-  cat $tmp/in >>$tmp/config.h
-  rm -f $tmp/in
   if test x"$ac_file" != x-; then
-    if diff $ac_file $tmp/config.h >/dev/null 2>&1; then
+    echo "/* $configure_input  */" >"$tmp/config.h"
+    cat "$ac_result" >>"$tmp/config.h"
+    if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
       { echo "$as_me:$LINENO: $ac_file is unchanged" >&5
 echo "$as_me: $ac_file is unchanged" >&6;}
     else
-      ac_dir=`(dirname "$ac_file") 2>/dev/null ||
-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_file" : 'X\(//\)[^/]' \| \
-	 X"$ac_file" : 'X\(//\)$' \| \
-	 X"$ac_file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-      { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
       rm -f $ac_file
-      mv $tmp/config.h $ac_file
+      mv "$tmp/config.h" $ac_file
     fi
   else
-    cat $tmp/config.h
-    rm -f $tmp/config.h
+    echo "/* $configure_input  */"
+    cat "$ac_result"
   fi
+  rm -f "$tmp/out12"
 # Compute $ac_file's index in $config_headers.
 _am_stamp_count=1
 for _am_header in $config_headers :; do
@@ -21640,135 +22688,39 @@
       _am_stamp_count=`expr $_am_stamp_count + 1` ;;
   esac
 done
-echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null ||
+echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
 $as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X$ac_file : 'X\(//\)[^/]' \| \
 	 X$ac_file : 'X\(//\)$' \| \
-	 X$ac_file : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
 echo X$ac_file |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`/stamp-h$_am_stamp_count
-done
-_ACEOF
-cat >>$CONFIG_STATUS <<\_ACEOF
-
-#
-# CONFIG_COMMANDS section.
-#
-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue
-  ac_dest=`echo "$ac_file" | sed 's,:.*,,'`
-  ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'`
-  ac_dir=`(dirname "$ac_dest") 2>/dev/null ||
-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$ac_dest" : 'X\(//\)[^/]' \| \
-	 X"$ac_dest" : 'X\(//\)$' \| \
-	 X"$ac_dest" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$ac_dest" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-  { if $as_mkdir_p; then
-    mkdir -p "$ac_dir"
-  else
-    as_dir="$ac_dir"
-    as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	 X"$as_dir" : 'X\(//\)[^/]' \| \
-	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
-echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5
-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;}
-   { (exit 1); exit 1; }; }; }
-
-  ac_builddir=.
-
-if test "$ac_dir" != .; then
-  ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
-  # A "../" for each directory in $ac_dir_suffix.
-  ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'`
-else
-  ac_dir_suffix= ac_top_builddir=
-fi
-
-case $srcdir in
-  .)  # No --srcdir option.  We are building in place.
-    ac_srcdir=.
-    if test -z "$ac_top_builddir"; then
-       ac_top_srcdir=.
-    else
-       ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'`
-    fi ;;
-  [\\/]* | ?:[\\/]* )  # Absolute path.
-    ac_srcdir=$srcdir$ac_dir_suffix;
-    ac_top_srcdir=$srcdir ;;
-  *) # Relative path.
-    ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix
-    ac_top_srcdir=$ac_top_builddir$srcdir ;;
-esac
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`/stamp-h$_am_stamp_count
+ ;;
 
-# Do not use `cd foo && pwd` to compute absolute paths, because
-# the directories may not exist.
-case `pwd` in
-.) ac_abs_builddir="$ac_dir";;
-*)
-  case "$ac_dir" in
-  .) ac_abs_builddir=`pwd`;;
-  [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";;
-  *) ac_abs_builddir=`pwd`/"$ac_dir";;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_builddir=${ac_top_builddir}.;;
-*)
-  case ${ac_top_builddir}. in
-  .) ac_abs_top_builddir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;;
-  *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_srcdir=$ac_srcdir;;
-*)
-  case $ac_srcdir in
-  .) ac_abs_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;;
-  *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;;
-  esac;;
-esac
-case $ac_abs_builddir in
-.) ac_abs_top_srcdir=$ac_top_srcdir;;
-*)
-  case $ac_top_srcdir in
-  .) ac_abs_top_srcdir=$ac_abs_builddir;;
-  [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;;
-  *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;;
-  esac;;
-esac
+  :C)  { echo "$as_me:$LINENO: executing $ac_file commands" >&5
+echo "$as_me: executing $ac_file commands" >&6;}
+ ;;
+  esac
 
 
-  { echo "$as_me:$LINENO: executing $ac_dest commands" >&5
-echo "$as_me: executing $ac_dest commands" >&6;}
-  case $ac_dest in
-    depfiles ) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
+  case $ac_file$ac_mode in
+    "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
   # Strip MF so we end up with the name of the file.
   mf=`echo "$mf" | sed -e 's/:.*$//'`
   # Check whether this is an Automake generated Makefile or not.
@@ -21778,18 +22730,29 @@
   # each Makefile.in and add a new line on top of each file to say so.
   # So let's grep whole file.
   if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
-    dirpart=`(dirname "$mf") 2>/dev/null ||
+    dirpart=`$as_dirname -- "$mf" ||
 $as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$mf" : 'X\(//\)[^/]' \| \
 	 X"$mf" : 'X\(//\)$' \| \
-	 X"$mf" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$mf" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
   else
     continue
   fi
@@ -21811,53 +22774,79 @@
        sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
     # Make sure the directory exists.
     test -f "$dirpart/$file" && continue
-    fdir=`(dirname "$file") 2>/dev/null ||
+    fdir=`$as_dirname -- "$file" ||
 $as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$file" : 'X\(//\)[^/]' \| \
 	 X"$file" : 'X\(//\)$' \| \
-	 X"$file" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$file" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$file" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
-    { if $as_mkdir_p; then
-    mkdir -p $dirpart/$fdir
-  else
-    as_dir=$dirpart/$fdir
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+    { as_dir=$dirpart/$fdir
+  case $as_dir in #(
+  -*) as_dir=./$as_dir;;
+  esac
+  test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
     as_dirs=
-    while test ! -d "$as_dir"; do
-      as_dirs="$as_dir $as_dirs"
-      as_dir=`(dirname "$as_dir") 2>/dev/null ||
+    while :; do
+      case $as_dir in #(
+      *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
+      *) as_qdir=$as_dir;;
+      esac
+      as_dirs="'$as_qdir' $as_dirs"
+      as_dir=`$as_dirname -- "$as_dir" ||
 $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
 	 X"$as_dir" : 'X\(//\)[^/]' \| \
 	 X"$as_dir" : 'X\(//\)$' \| \
-	 X"$as_dir" : 'X\(/\)' \| \
-	 .     : '\(.\)' 2>/dev/null ||
+	 X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
 echo X"$as_dir" |
-    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; }
-  	  /^X\(\/\/\)[^/].*/{ s//\1/; q; }
-  	  /^X\(\/\/\)$/{ s//\1/; q; }
-  	  /^X\(\/\).*/{ s//\1/; q; }
-  	  s/.*/./; q'`
+    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)[^/].*/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\/\)$/{
+	    s//\1/
+	    q
+	  }
+	  /^X\(\/\).*/{
+	    s//\1/
+	    q
+	  }
+	  s/.*/./; q'`
+      test -d "$as_dir" && break
     done
-    test ! -n "$as_dirs" || mkdir $as_dirs
-  fi || { { echo "$as_me:$LINENO: error: cannot create directory $dirpart/$fdir" >&5
-echo "$as_me: error: cannot create directory $dirpart/$fdir" >&2;}
+    test -z "$as_dirs" || eval "mkdir $as_dirs"
+  } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5
+echo "$as_me: error: cannot create directory $as_dir" >&2;}
    { (exit 1); exit 1; }; }; }
-
     # echo "creating $dirpart/$file"
     echo '# dummy' > "$dirpart/$file"
   done
 done
  ;;
+
   esac
-done
-_ACEOF
+done # for ac_tag
 
-cat >>$CONFIG_STATUS <<\_ACEOF
 
 { (exit 0); exit 0; }
 _ACEOF
--- xserver-xorg-video-nv-1.2.0.orig/src/Makefile.in
+++ xserver-xorg-video-nv-1.2.0/src/Makefile.in
@@ -62,7 +62,7 @@
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
@@ -139,6 +139,7 @@
 FFLAGS = @FFLAGS@
 FILE_MAN_DIR = @FILE_MAN_DIR@
 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+GREP = @GREP@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -173,13 +174,9 @@
 VERSION = @VERSION@
 XORG_CFLAGS = @XORG_CFLAGS@
 XORG_LIBS = @XORG_LIBS@
-ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-ac_pt_PKG_CONFIG = @ac_pt_PKG_CONFIG@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
@@ -196,24 +193,31 @@
 build_os = @build_os@
 build_vendor = @build_vendor@
 datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
+htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moduledir = @moduledir@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
--- xserver-xorg-video-nv-1.2.0.orig/src/nv_driver.c
+++ xserver-xorg-video-nv-1.2.0/src/nv_driver.c
@@ -178,6 +178,8 @@
   { 0x10DE0288, "Quadro4 980 XGL" },
   { 0x10DE0289, "Quadro4 780 XGL" },
 
+  { 0x10DE02A0, "GeForce3 MX for XBox" },
+
   { 0x10DE0301, "GeForce FX 5800 Ultra" },
   { 0x10DE0302, "GeForce FX 5800" },
   { 0x10DE0308, "Quadro FX 2000" },
@@ -1737,7 +1739,8 @@
     /* Program the registers */
     vgaHWProtect(pScrn, TRUE);
 
-    NVDACRestore(pScrn, vgaReg, nvReg, FALSE);
+    if (pNv->Chipset != NV_CHIP_XBOX)
+        NVDACRestore(pScrn, vgaReg, nvReg, FALSE);
 
 #if X_BYTE_ORDER == X_BIG_ENDIAN
     /* turn on LFB swapping */
@@ -1781,7 +1784,8 @@
 
     /* Only restore text mode fonts/text for the primary card */
     vgaHWProtect(pScrn, TRUE);
-    NVDACRestore(pScrn, vgaReg, nvReg, pNv->Primary);
+    if (pNv->Chipset != NV_CHIP_XBOX)
+        NVDACRestore(pScrn, vgaReg, nvReg, pNv->Primary);
     if(pNv->twoHeads) {
         VGA_WR08(pNv->PCIO, 0x03D4, 0x44);
         VGA_WR08(pNv->PCIO, 0x03D5, nvReg->crtcOwner);
@@ -1919,6 +1923,11 @@
          }
     }
 
+    if (pNv->Chipset == NV_CHIP_XBOX)
+    {
+    	pNv->CURSOR = (U032 *)(pNv->FbStart + pNv->FbUsableSize);
+    }    
+    
     /* Map the VGA memory when the primary video */
     if (pNv->Primary && !pNv->FBDev) {
 	hwp->MapSize = 0x10000;
--- xserver-xorg-video-nv-1.2.0.orig/src/nv_setup.c
+++ xserver-xorg-video-nv-1.2.0/src/nv_setup.c
@@ -464,6 +464,11 @@
 
     NVLockUnlock(pNv, 0);
 
+    if (pNv->Chipset == NV_CHIP_XBOX)
+    {
+        pNv->PMC[0x200/4] |= 0x10001100;
+    }
+
     NVI2CInit(pScrn);
 
     pNv->Television = FALSE;
--- xserver-xorg-video-nv-1.2.0.orig/src/nv_type.h
+++ xserver-xorg-video-nv-1.2.0/src/nv_type.h
@@ -15,6 +15,8 @@
 #define NV_ARCH_30  0x30
 #define NV_ARCH_40  0x40
 
+#define PCI_CHIP_XBOX   0x02A0
+#define NV_CHIP_XBOX    ((PCI_VENDOR_NVIDIA  << 16) | PCI_CHIP_XBOX)
 
 #define BITMASK(t,b) (((unsigned)(1U << (((t)-(b)+1)))-1)  << (b))
 #define MASKEXPAND(mask) BITMASK(1?mask,0?mask)
--- xserver-xorg-video-nv-1.2.0.orig/src/nv_video.c
+++ xserver-xorg-video-nv-1.2.0/src/nv_video.c
@@ -522,6 +522,14 @@
         drw_h <<= 1;
     }
 
+    if (pNv->Chipset == NV_CHIP_XBOX)
+    {
+        pNv->PMC[(0x8900/4) + buffer] = pNv->PCRTC[0x800/4] + offset;
+    }
+    else
+    {
+    	pNv->PMC[(0x8900/4) + buffer] = offset;
+    }
     pNv->PMC[(0x8900/4) + buffer] = offset;
     pNv->PMC[(0x8928/4) + buffer] = (height << 16) | width;
     pNv->PMC[(0x8930/4) + buffer] = ((y1 << 4) & 0xffff0000) | (x1 >> 12);
--- xserver-xorg-video-nv-1.2.0.orig/src/riva_hw.c
+++ xserver-xorg-video-nv-1.2.0/src/riva_hw.c
@@ -48,6 +48,8 @@
 #include "riva_hw.h"
 #include "riva_tbl.h"
 
+#define XBOX
+
 /*
  * This file is an OS-agnostic file used to make RIVA 128 and RIVA TNT
  * operate identically (except TNT has more memory and better 3D quality.
@@ -775,6 +777,7 @@
     /*
      * Load HW mode state.
      */
+#ifndef XBOX
     VGA_WR08(chip->PCIO, 0x03D4, 0x19);
     VGA_WR08(chip->PCIO, 0x03D5, state->repaint0);
     VGA_WR08(chip->PCIO, 0x03D4, 0x1A);
@@ -785,6 +788,7 @@
     VGA_WR08(chip->PCIO, 0x03D5, state->pixel);
     VGA_WR08(chip->PCIO, 0x03D4, 0x2D);
     VGA_WR08(chip->PCIO, 0x03D5, state->horiz);
+#endif
     VGA_WR08(chip->PCIO, 0x03D4, 0x1B);
     VGA_WR08(chip->PCIO, 0x03D5, state->arbitration0);
     VGA_WR08(chip->PCIO, 0x03D4, 0x20);
@@ -795,13 +799,14 @@
     VGA_WR08(chip->PCIO, 0x03D5, state->cursor1);
     VGA_WR08(chip->PCIO, 0x03D4, 0x2F);
     VGA_WR08(chip->PCIO, 0x03D5, state->cursor2);
+#ifndef XBOX
     VGA_WR08(chip->PCIO, 0x03D4, 0x39);
     VGA_WR08(chip->PCIO, 0x03D5, state->interlace);
 
     chip->PRAMDAC[0x00000508/4] = state->vpll;
     chip->PRAMDAC[0x0000050C/4] = state->pllsel;
     chip->PRAMDAC[0x00000600/4]  = state->general;
-
+#endif
     /*
      * Turn off VBlank enable and reset.
      */
--- xserver-xorg-video-nv-1.2.0.orig/man/Makefile.in
+++ xserver-xorg-video-nv-1.2.0/man/Makefile.in
@@ -69,7 +69,7 @@
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
 CONFIG_HEADER = $(top_builddir)/config.h
 CONFIG_CLEAN_FILES =
 SOURCES =
@@ -122,6 +122,7 @@
 FFLAGS = @FFLAGS@
 FILE_MAN_DIR = @FILE_MAN_DIR@
 FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
+GREP = @GREP@
 INSTALL_DATA = @INSTALL_DATA@
 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 INSTALL_SCRIPT = @INSTALL_SCRIPT@
@@ -156,13 +157,9 @@
 VERSION = @VERSION@
 XORG_CFLAGS = @XORG_CFLAGS@
 XORG_LIBS = @XORG_LIBS@
-ac_ct_AR = @ac_ct_AR@
 ac_ct_CC = @ac_ct_CC@
 ac_ct_CXX = @ac_ct_CXX@
 ac_ct_F77 = @ac_ct_F77@
-ac_ct_RANLIB = @ac_ct_RANLIB@
-ac_ct_STRIP = @ac_ct_STRIP@
-ac_pt_PKG_CONFIG = @ac_pt_PKG_CONFIG@
 am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
 am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
 am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
@@ -179,24 +176,31 @@
 build_os = @build_os@
 build_vendor = @build_vendor@
 datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
 exec_prefix = @exec_prefix@
 host = @host@
 host_alias = @host_alias@
 host_cpu = @host_cpu@
 host_os = @host_os@
 host_vendor = @host_vendor@
+htmldir = @htmldir@
 includedir = @includedir@
 infodir = @infodir@
 install_sh = @install_sh@
 libdir = @libdir@
 libexecdir = @libexecdir@
+localedir = @localedir@
 localstatedir = @localstatedir@
 mandir = @mandir@
 mkdir_p = @mkdir_p@
 moduledir = @moduledir@
 oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
 prefix = @prefix@
 program_transform_name = @program_transform_name@
+psdir = @psdir@
 sbindir = @sbindir@
 sharedstatedir = @sharedstatedir@
 sysconfdir = @sysconfdir@
--- xserver-xorg-video-nv-1.2.0.orig/debian/control
+++ xserver-xorg-video-nv-1.2.0/debian/control
@@ -0,0 +1,27 @@
+Source: xserver-xorg-video-nv
+Section: x11
+Priority: optional
+Maintainer: Debian X Strike Force <debian-x@lists.debian.org>
+Uploaders: David Nusinow <dnusinow@debian.org>, Branden Robinson <branden@debian.org>, Fabio M. Di Nitto <fabbione@fabbione.net>
+Build-Depends: debhelper (>= 5.0.0), pkg-config, xserver-xorg-dev (>= 2:1.1.1), x11proto-video-dev, x11proto-core-dev, x11proto-fonts-dev, x11proto-randr-dev, x11proto-render-dev, x11proto-xext-dev
+Standards-Version: 3.6.1
+
+Package: xserver-xorg-video-nv
+Architecture: any
+Depends: ${shlibs:Depends}, ${misc:Depends}, xserver-xorg-core (>= 2:1.1.1)
+Provides: xserver-xorg-video-1.0, xf86-video-driver-riva128
+Conflicts: xserver-xorg-video-riva128
+Replaces: xserver-xorg (<< 6.8.2-35), xserver-xorg-video-riva128
+Description: X.Org X server -- NV display driver
+ This driver for the X.Org X server (see xserver-xorg for a further description)
+ provides support for NVIDIA Riva, TNT, GeForce, and Quadro cards.
+ .
+ Note that this is not the same as the binary-only 'nvidia' driver, which
+ adds 3D support, but is binary-only and not supported.
+ .
+ More information about X.Org can be found at:
+ <URL:http://xorg.freedesktop.org>
+ <URL:http://lists.freedesktop.org/mailman/listinfo/xorg>
+ .
+ This module can be found as the module 'driver/xf86-video-nv' at
+ :pserver:anoncvs@cvs.freedesktop.org:/cvs/xorg
--- xserver-xorg-video-nv-1.2.0.orig/debian/compat
+++ xserver-xorg-video-nv-1.2.0/debian/compat
@@ -0,0 +1 @@
+5
--- xserver-xorg-video-nv-1.2.0.orig/debian/xserver-xorg-video-nv.install
+++ xserver-xorg-video-nv-1.2.0/debian/xserver-xorg-video-nv.install
@@ -0,0 +1,2 @@
+usr/lib/xorg/modules/drivers/*.so
+usr/share/man/man4/*
--- xserver-xorg-video-nv-1.2.0.orig/debian/changelog
+++ xserver-xorg-video-nv-1.2.0/debian/changelog
@@ -0,0 +1,99 @@
+xserver-xorg-video-nv (1:1.2.0-3xbox) unstable; urgency=low
+
+  * Merge xf86-video-nvxbox changes from xbox-linux.org
+  * Acceleration causes a segfault; set "NoAccel" to "true" in xorg.conf
+
+ -- Russ W. Knize <rknize@yahoo.com>  Wed, 11 Apr 2007 16:43:21 -0500
+
+xserver-xorg-video-nv (1:1.2.0-3) unstable; urgency=low
+
+  [ Steve Langasek ]
+  * Upload to unstable
+
+ -- David Nusinow <dnusinow@debian.org>  Mon, 18 Sep 2006 19:57:45 -0400
+
+xserver-xorg-video-nv (1:1.2.0-2) experimental; urgency=low
+
+  [ David Nusinow ]
+  * Actually bump debhelper compat to 5 rather than just the build-depends
+  * Bump xserver (build-)depends epochs to 2: to deal with botched
+    server upload
+
+  [ Drew Parsons ]
+  *  Provides: xserver-xorg-video-1.0 not xserver-xorg-video.
+
+ -- David Nusinow <dnusinow@debian.org>  Tue, 22 Aug 2006 23:46:36 +0000
+
+xserver-xorg-video-nv (1:1.2.0-1) experimental; urgency=low
+
+  [ Andres Salomon ]
+  * Test for obj-$(DEB_BUILD_GNU_TYPE) before creating it during build;
+    idempotency fix.
+  * Run dh_install w/ --list-missing.
+
+  [ David Nusinow ]
+  * New upstream release
+  * Bump dependency on xserver-xorg-core to >= 1:1.1.1. Do the same thing for
+    the build-dep on xserver-xorg-dev.
+  * Bump debhelper compat to 5
+
+ -- David Nusinow <dnusinow@debian.org>  Tue, 15 Aug 2006 00:00:03 +0000
+
+xserver-xorg-video-nv (1:1.0.1.5-2) unstable; urgency=low
+
+  * Upload to modular
+
+ -- David Nusinow <dnusinow@debian.org>  Sun, 26 Mar 2006 20:25:48 -0500
+
+xserver-xorg-video-nv (1:1.0.1.5-1) experimental; urgency=low
+
+  * First upload to Debian
+  * Add copyright info
+  * Change source package, package, and provides names to denote the
+    type of driver and that they are for xserver-xorg
+
+ -- David Nusinow <dnusinow@debian.org>  Thu, 19 Jan 2006 20:29:12 -0500
+
+xserver-xorg-driver-nv (1:1.0.1.5-0ubuntu1) dapper; urgency=low
+
+  * New upstream release.
+  * Add provides on xserver-xorg-driver.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com>  Wed,  4 Jan 2006 20:00:36 +1100
+
+xserver-xorg-driver-nv (1:1.0.1.4-0ubuntu1) dapper; urgency=low
+
+  * New upstream release.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com>  Mon, 19 Dec 2005 09:09:26 +1100
+
+xserver-xorg-driver-nv (1:1.0.1.3-0ubuntu1) dapper; urgency=low
+
+  * New upstream release.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com>  Mon, 12 Dec 2005 13:05:27 +1100
+
+xserver-xorg-driver-nv (1:1.0.1.2-0ubuntu2) dapper; urgency=low
+
+  * Add missing Build-Depends (x11proto-core-dev, x11proto-fonts-dev,
+    x11proto-randr-dev, x11proto-render-dev, x11proto-xext-dev).
+
+ -- Daniel Stone <daniel.stone@ubuntu.com>  Mon,  5 Dec 2005 12:56:00 +1100
+
+xserver-xorg-driver-nv (1:1.0.1.2-0ubuntu1) dapper; urgency=low
+
+  * New upstream release.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com>  Tue, 22 Nov 2005 13:33:44 +1100
+
+xserver-xorg-driver-nv (1:1.0.1.1-1) dapper; urgency=low
+
+  * New upstream release.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com>  Tue, 25 Oct 2005 17:08:20 +1000
+
+xserver-xorg-driver-nv (1:1.0.1-1) breezy; urgency=low
+
+  * First xserver-xorg-driver-nv release.
+
+ -- Daniel Stone <daniel.stone@ubuntu.com>  Wed,  6 Jul 2005 15:48:17 +1000
--- xserver-xorg-video-nv-1.2.0.orig/debian/copyright
+++ xserver-xorg-video-nv-1.2.0/debian/copyright
@@ -0,0 +1,56 @@
+Copyright 1993-2003 NVIDIA, Corporation.  All rights reserved.
+Copyright 1996-1997  David J. McKay
+
+NOTICE TO USER:   The source code  is copyrighted under  U.S. and
+international laws.  Users and possessors of this source code are
+hereby granted a nonexclusive,  royalty-free copyright license to
+use this code in individual and commercial software.
+
+Any use of this source code must include,  in the user documenta-
+tion and  internal comments to the code,  notices to the end user
+as follows:
+
+Copyright 2003 NVIDIA, Corporation.  All rights reserved.
+
+NVIDIA, CORPORATION MAKES NO REPRESENTATION ABOUT THE SUITABILITY
+OF  THIS SOURCE  CODE  FOR ANY PURPOSE.  IT IS  PROVIDED  "AS IS"
+WITHOUT EXPRESS OR IMPLIED WARRANTY OF ANY KIND.  NVIDIA, CORPOR-
+ATION DISCLAIMS ALL WARRANTIES  WITH REGARD  TO THIS SOURCE CODE,
+INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGE-
+MENT,  AND FITNESS  FOR A PARTICULAR PURPOSE.   IN NO EVENT SHALL
+NVIDIA, CORPORATION  BE LIABLE FOR ANY SPECIAL,  INDIRECT,  INCI-
+DENTAL, OR CONSEQUENTIAL DAMAGES,  OR ANY DAMAGES  WHATSOEVER RE-
+SULTING FROM LOSS OF USE,  DATA OR PROFITS,  WHETHER IN AN ACTION
+OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,  ARISING OUT OF
+OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOURCE CODE.
+
+U.S. Government  End  Users.   This source code  is a "commercial
+item,"  as that  term is  defined at  48 C.F.R. 2.101 (OCT 1995),
+consisting  of "commercial  computer  software"  and  "commercial
+computer  software  documentation,"  as such  terms  are  used in
+48 C.F.R. 12.212 (SEPT 1995)  and is provided to the U.S. Govern-
+ment only as  a commercial end item.   Consistent with  48 C.F.R.
+12.212 and  48 C.F.R. 227.7202-1 through  227.7202-4 (JUNE 1995),
+all U.S. Government End Users  acquire the source code  with only
+those rights set forth herein.
+
+
+Copyright 1996-1997  David J. McKay
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+DAVID J. MCKAY BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
+OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+SOFTWARE.
--- xserver-xorg-video-nv-1.2.0.orig/debian/rules
+++ xserver-xorg-video-nv-1.2.0/debian/rules
@@ -0,0 +1,91 @@
+#!/usr/bin/make -f
+# debian/rules for the Debian xserver-xorg-driver-nv package.
+# Copyright © 2004 Scott James Remnant <scott@netsplit.com>
+# Copyright © 2005 Daniel Stone <daniel@fooishbar.org>
+# Copyright © 2005 David Nusinow <dnusinow@debian.org>
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+include debian/xsfbs/xsfbs.mk
+
+CFLAGS = -Wall -g
+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS)))
+	CFLAGS += -O0
+else
+	CFLAGS += -O2
+endif
+ifeq (,$(findstring nostrip,$(DEB_BUILD_OPTIONS)))
+	INSTALL_PROGRAM += -s
+endif
+
+DEB_HOST_ARCH      ?= $(shell dpkg-architecture -qDEB_HOST_ARCH)
+DEB_HOST_GNU_TYPE  ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
+DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE)
+ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE))
+	confflags += --build=$(DEB_HOST_GNU_TYPE)
+else
+	confflags += --build=$(DEB_BUILD_GNU_TYPE) --host=$(DEB_HOST_GNU_TYPE)
+endif
+
+# kbd_drv.a isn't phenomenally useful; kbd_drv.so more so
+confflags += --disable-static
+
+build: build-stamp
+build-stamp:
+	dh_testdir
+
+	test -d obj-$(DEB_BUILD_GNU_TYPE) || mkdir obj-$(DEB_BUILD_GNU_TYPE)
+	cd obj-$(DEB_BUILD_GNU_TYPE) && \
+	../configure --prefix=/usr --mandir=\$${prefix}/share/man \
+	             --infodir=\$${prefix}/share/info $(confflags) \
+	             CFLAGS="$(CFLAGS)" 
+	cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE)
+
+	touch build-stamp
+
+clean:
+	dh_testdir
+	dh_testroot
+	rm -f build-stamp
+
+	rm -f config.cache config.log config.status
+	rm -f */config.cache */config.log */config.status
+	rm -f conftest* */conftest*
+	rm -rf autom4te.cache */autom4te.cache
+	rm -rf obj-*
+
+	dh_clean
+
+install: build
+	dh_testdir
+	dh_testroot
+	dh_clean -k
+	dh_installdirs
+
+	cd obj-$(DEB_BUILD_GNU_TYPE) && $(MAKE) DESTDIR=$(CURDIR)/debian/tmp install
+
+# Build architecture-dependent files here.
+binary-arch: build install
+	dh_testdir
+	dh_testroot
+
+	dh_installdocs
+	dh_installchangelogs
+	dh_install --sourcedir=debian/tmp --list-missing
+	dh_link
+	dh_strip
+	dh_compress
+	dh_fixperms
+	dh_installdeb
+	dh_shlibdeps
+	dh_gencontrol
+	dh_md5sums
+	dh_builddeb
+
+# Build architecture-independent files here.
+binary-indep: build install
+# Nothing to do
+
+binary: binary-indep binary-arch
+.PHONY: build clean binary-indep binary-arch binary install
--- xserver-xorg-video-nv-1.2.0.orig/debian/xsfbs/xsfbs.mk
+++ xserver-xorg-video-nv-1.2.0/debian/xsfbs/xsfbs.mk
@@ -0,0 +1,359 @@
+#!/usr/bin/make -f
+# $Id: xsfbs.mk 2284 2006-06-06 18:02:50Z branden $
+
+# Debian rules file for xorg-x11 source package
+
+# Copyright 1996 Stephen Early
+# Copyright 1997 Mark Eichin
+# Copyright 1998-2005 Branden Robinson
+# Copyright 2005 David Nusinow
+#
+# Licensed under the GNU General Public License, version 2.  See the file
+# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
+
+# Originally by Stephen Early <sde1000@debian.org>
+# Modified by Mark W. Eichin <eichin@kitten.gen.ma.us>
+# Modified by Adam Heath <doogie@debian.org>
+# Modified by Branden Robinson <branden@debian.org>
+# Modified by Fabio Massimo Di Nitto <fabbione@fabbione.net>
+# Modified by David Nusinow <dnusinow@debian.org>
+# Acknowledgements to Manoj Srivastava.
+
+# Pass $(DH_OPTIONS) into the environment for debhelper's benefit.
+export DH_OPTIONS
+
+# Set up parameters for the upstream build environment.
+
+# Determine (source) package name from Debian changelog.
+SOURCE_NAME:=$(shell dpkg-parsechangelog -ldebian/changelog \
+                        | grep '^Source:' | awk '{print $$2}')
+
+# Determine package version from Debian changelog.
+SOURCE_VERSION:=$(shell dpkg-parsechangelog -ldebian/changelog \
+                        | grep '^Version:' | awk '{print $$2}')
+
+# Determine upstream version number.
+UPSTREAM_VERSION:=$(shell echo $(SOURCE_VERSION) | sed 's/-.*//')
+
+# Determine the source version without the epoch for make-orig-tar-gz
+NO_EPOCH_VER:=$(shell echo $(UPSTREAM_VERSION) | sed 's/^.://')
+
+# Figure out who's building this package.
+BUILDER:=$(shell echo $${DEBEMAIL:-$${EMAIL:-$$(echo $$LOGNAME@$$(cat /etc/mailname 2>/dev/null))}})
+
+# Find out if this is an official build; an official build has nothing but
+# digits, dots, and/or the strings "woody" or "sarge" in the Debian part of the
+# version number.  Anything else indicates an unofficial build.
+OFFICIAL_BUILD:=$(shell VERSION=$(SOURCE_VERSION); if ! expr "$$(echo $${VERSION\#\#*-} | sed 's/\(woody\|sarge\)//g')" : ".*[^0-9.].*" >/dev/null 2>&1; then echo yes; fi)
+
+# Set up parameters for the Debian build environment.
+
+# Determine our architecture.
+BUILD_ARCH:=$(shell dpkg-architecture -qDEB_BUILD_ARCH)
+# Work around some old-time dpkg braindamage.
+BUILD_ARCH:=$(subst i486,i386,$(BUILD_ARCH))
+# The DEB_HOST_ARCH variable may be set per the Debian cross-compilation policy.
+ifdef DEB_HOST_ARCH
+ ARCH:=$(DEB_HOST_ARCH)
+else
+ # dpkg-cross sets the ARCH environment variable; if set, use it.
+ ifdef ARCH
+  ARCH:=$(ARCH)
+ else
+  ARCH:=$(BUILD_ARCH)
+ endif
+endif
+
+# $(STAMP_DIR) houses stamp files for complex targets.
+STAMP_DIR:=stampdir
+
+# $(SOURCE_DIR) houses one or more source trees.
+SOURCE_DIR:=build-tree
+
+# $(SOURCE_TREE) is the location of the source tree to be compiled.  If there
+# is more than one, others are found using this name plus a suffix to indicate
+# the purpose of the additional tree (e.g., $(SOURCE_TREE)-custom).  The
+# "setup" target is responsible for creating such trees.
+#SOURCE_TREE:=$(SOURCE_DIR)/xc
+#FIXME We need to define this in our debian/rules file
+
+# $(DEBTREEDIR) is where all install rules are told (via $(DESTDIR)) to place
+# their files.
+DEBTREEDIR:=$(CURDIR)/debian/tmp
+
+# All "important" targets have four lines:
+#   1) A target name that is invoked by a package-building tool or the user.
+#      This consists of a dependency on a "$(STAMP_DIR)/"-prefixed counterpart.
+#   2) A line delcaring 1) as a phony target (".PHONY:").
+#   3) A "$(STAMP_DIR)/"-prefixed target which does the actual work, and may
+#   depend on other targets.
+#   4) A line declaring 3) as a member of the $(stampdir_targets) variable; the
+#   "$(STAMP_DIR)/" prefix is omitted.
+#
+# This indirection is needed so that the "stamp" files that signify when a rule
+# is done can be located in a separate "stampdir".  Recall that make has no way
+# to know when a goal has been met for a phony target (like "build" or
+# "install").
+#
+# At the end of each "$(STAMP_DIR)/" target, be sure to run the command ">$@"
+# so that the target will not be run again.  Removing the file will make Make
+# run the target over.
+
+# All phony targets should be declared as dependencies of .PHONY, even if they
+# do not have "($STAMP_DIR)/"-prefixed counterparts.
+
+# Define a harmless default rule to keep things from going nuts by accident.
+.PHONY: default
+default:
+
+# Set up the $(STAMP_DIR) directory.
+.PHONY: stampdir
+stampdir_targets+=stampdir
+stampdir: $(STAMP_DIR)/stampdir
+$(STAMP_DIR)/stampdir:
+	mkdir $(STAMP_DIR)
+	>$@
+
+# Set up the package build directory as quilt expects to find it.
+.PHONY: prepare
+stampdir_targets+=prepare
+prepare: $(STAMP_DIR)/genscripts $(STAMP_DIR)/prepare $(STAMP_DIR)/patches $(STAMP_DIR)/log
+$(STAMP_DIR)/prepare: $(STAMP_DIR)/stampdir
+	if [ ! -e $(STAMP_DIR)/patches ]; then \
+		mkdir $(STAMP_DIR)/patches; \
+		ln -s $(STAMP_DIR)/patches .pc; \
+		echo 2 >$(STAMP_DIR)/patches/.version; \
+	fi; \
+	if [ ! -e $(STAMP_DIR)/log ]; then \
+		mkdir $(STAMP_DIR)/log; \
+	fi; \
+	if [ ! -e patches ]; then \
+		ln -s debian/patches patches; \
+	fi; \
+	>$@
+
+# Apply all patches to the upstream source.
+.PHONY: patch
+stampdir_targets+=patch
+patch: $(STAMP_DIR)/patch
+$(STAMP_DIR)/patch: $(STAMP_DIR)/prepare
+	if ! [ `which quilt` ]; then \
+		echo "Couldn't find quilt. Please install it or add it to the build-depends for this package."; \
+		exit 1; \
+	fi; \
+	if quilt next; then \
+	  echo -n "Applying patches..."; \
+	  if quilt push -a -v >$(STAMP_DIR)/log/patch 2>&1; then \
+	    echo "successful."; \
+	  else \
+	    echo "failed! (check $(STAMP_DIR)/log/patch for details)"; \
+	    exit 1; \
+	  fi; \
+	else \
+	  echo "No patches to apply"; \
+	fi; \
+	>$@
+
+# Revert all patches to the upstream source.
+.PHONY: unpatch
+unpatch:
+	rm -f $(STAMP_DIR)/patch
+	@echo -n "Unapplying patches..."; \
+	if [ -e $(STAMP_DIR)/patches/applied-patches ]; then \
+	  if quilt pop -a -v >$(STAMP_DIR)/log/unpatch 2>&1; then \
+	    echo "successful."; \
+	  else \
+	    echo "failed! (check $(STAMP_DIR)/log/unpatch for details)"; \
+	    exit 1; \
+	  fi; \
+	else \
+	  echo "nothing to do."; \
+	fi
+
+# Clean the generated maintainer scripts.
+.PHONY: cleanscripts
+cleanscripts:
+	rm -f $(STAMP_DIR)/genscripts
+	rm -f debian/*.config \
+	      debian/*.postinst \
+	      debian/*.postrm \
+	      debian/*.preinst \
+	      debian/*.prerm
+
+# Clean the package build tree.
+.PHONY: xsfclean
+xsfclean: cleanscripts unpatch
+	dh_testdir
+	rm -f .pc patches
+	rm -rf $(STAMP_DIR) $(SOURCE_DIR)
+	rm -rf imports
+	dh_clean debian/shlibs.local \
+	         debian/MANIFEST.$(ARCH) debian/MANIFEST.$(ARCH).new \
+	         debian/po/pothead
+
+# Generate the debconf templates POT file header.
+debian/po/pothead: debian/po/pothead.in
+	sed -e 's/SOURCE_VERSION/$(SOURCE_VERSION)/' \
+	  -e 's/DATE/$(shell date "+%F %X%z"/)' <$< >$@
+
+# Update POT and PO files.
+.PHONY: updatepo
+updatepo: debian/po/pothead
+	debian/scripts/debconf-updatepo --pot-header=pothead --verbose
+
+# Use the MANIFEST files to determine whether we're shipping everything we
+# expect to ship, and not shipping anything we don't expect to ship.
+.PHONY: check-manifest
+stampdir_targets+=check-manifest
+check-manifest: $(STAMP_DIR)/check-manifest
+$(STAMP_DIR)/check-manifest: $(STAMP_DIR)/install
+	# Compare manifests.
+	(cd debian/tmp && find -type f | LC_ALL=C sort | cut -c3-) \
+	  >debian/MANIFEST.$(ARCH).new
+	# Construct MANIFEST files from MANIFEST.$(ARCH).in and
+	# MANIFEST.$(ARCH).all or MANIFEST.all.
+	if expr "$(findstring -DBuildFonts=NO,$(IMAKE_DEFINES))" \
+	  : "-DBuildFonts=NO" >/dev/null 2>&1; then \
+	  LC_ALL=C sort -u debian/MANIFEST.$(ARCH).in >debian/MANIFEST.$(ARCH); \
+	else \
+	  if [ -e debian/MANIFEST.$(ARCH).all ]; then \
+	    LC_ALL=C sort -u debian/MANIFEST.$(ARCH).in debian/MANIFEST.$(ARCH).all >debian/MANIFEST.$(ARCH); \
+	  else \
+	    LC_ALL=C sort -u debian/MANIFEST.$(ARCH).in debian/MANIFEST.all >debian/MANIFEST.$(ARCH); \
+	  fi; \
+	fi
+	# Confirm that the installed file list has not changed.
+	if [ -e debian/MANIFEST.$(ARCH) ]; then \
+	  if ! cmp -s debian/MANIFEST.$(ARCH) debian/MANIFEST.$(ARCH).new; then \
+	    diff -U 0 debian/MANIFEST.$(ARCH) debian/MANIFEST.$(ARCH).new || DIFFSTATUS=$$?; \
+	    case $${DIFFSTATUS:-0} in \
+	      0) ;; \
+	      1) if [ -n "$$IGNORE_MANIFEST_CHANGES" ]; then \
+	           echo 'MANIFEST check failed; ignoring problem because \$$IGNORE_MANIFEST_CHANGES set' >&2; \
+	           echo 'Please ensure that the package maintainer has an up-to-date version of the' >&2; \
+	           echo 'MANIFEST.$(ARCH).in file.' >&2; \
+	         else \
+	           echo 'MANIFEST check failed; please see debian/README' >&2; \
+	           exit 1; \
+	         fi; \
+	         ;; \
+	      *) echo "diff reported unexpected exit status $$DIFFSTATUS when performing MANIFEST check" >&2; \
+	         exit 1; \
+	         ;; \
+	    esac; \
+	  fi; \
+	fi
+	>$@
+
+# Because we build (and install) different files depending on whether or not
+# any architecture-independent packages are being created, the list of files we
+# expect to see will differ; see the discussion of the "build" target above.
+.PHONY: check-manifest-arch check-manifest-indep
+check-manifest-arch: IMAKE_DEFINES+= -DBuildSpecsDocs=NO -DBuildFonts=NO -DInstallHardcopyDocs=NO
+check-manifest-arch: check-manifest
+check-manifest-indep: check-manifest
+
+# Remove files from the upstream source tree that we don't need, or which have
+# licensing problems.  It must be run before creating the .orig.tar.gz.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: prune-upstream-tree
+prune-upstream-tree:
+	# Ensure we're in the correct directory.
+	dh_testdir
+	grep -rvh '^#' debian/prune/ | xargs --no-run-if-empty rm -rf
+
+# Change to what should be the correct directory, ensure it is, and if
+# so, create the .orig.tar.gz file.  Exclude the debian directory and its
+# contents, and any .svn directories and their contents (so that we can safely
+# build an .orig.tar.gz from SVN checkout, not just an export).
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+#
+# This rule *IS* the recommended method for creating a new .orig.tar.gz file,
+# for the rare situations when one is needed.
+.PHONY: make-orig-tar-gz
+make-orig-tar-gz: clean prune-upstream-tree
+	( cd .. \
+	  && if [ $(shell basename $(CURDIR)) != $(SOURCE_NAME)-$(NO_EPOCH_VER) ]; then \
+	    echo "Our current working directory has the wrong name. Renaming..." >&2; \
+		mv $(CURDIR) $(SOURCE_NAME)-$(NO_EPOCH_VER); \
+	  fi; \
+	    tar --exclude=debian --exclude=debian/* \
+	        --exclude=.svn --exclude=.svn/* \
+	        -cf - $(SOURCE_NAME)-$(NO_EPOCH_VER) \
+	    | gzip -9 >$(SOURCE_NAME)_$(NO_EPOCH_VER).orig.tar.gz; \
+	   )
+
+# Verify that there are no offsets or fuzz in the patches we apply.
+#
+# Note: This rule is for Debian package maintainers' convenience, and is not
+# needed for conventional build scenarios.
+.PHONY: patch-audit
+patch-audit: prepare unpatch
+	@echo -n "Auditing patches..."; \
+	>$(STAMP_DIR)/log/patch; \
+	FUZZY=; \
+	while [ -n "$$(quilt next)" ]; do \
+	  RESULT=$$(quilt push -v | tee -a $(STAMP_DIR)/log/patch | grep ^Hunk | sed 's/^Hunk.*\(succeeded\|FAILED\).*/\1/');\
+	  case "$$RESULT" in \
+	    succeeded) \
+	      echo "fuzzy patch: $$(quilt top)" \
+	        | tee -a $(STAMP_DIR)/log/$$(quilt top); \
+	      FUZZY=yes; \
+	      ;; \
+	    FAILED) \
+	      echo "broken patch: $$(quilt next)" \
+	        | tee -a $(STAMP_DIR)/log/$$(quilt next); \
+	      exit 1; \
+	      ;; \
+	  esac; \
+	done; \
+	if [ -n "$$FUZZY" ]; then \
+	  echo "there were fuzzy patches; please fix."; \
+	  exit 1; \
+	else \
+	  echo "done."; \
+	fi
+
+# Generate the maintainer scripts.
+.PHONY: genscripts
+stampdir_targets+=genscripts
+genscripts: $(STAMP_DIR)/genscripts
+$(STAMP_DIR)/genscripts: $(STAMP_DIR)/stampdir
+	for FILE in debian/*.config.in \
+	            debian/*.postinst.in \
+	            debian/*.postrm.in \
+	            debian/*.preinst.in \
+	            debian/*.prerm.in; do \
+	  if [ -e "$$FILE" ]; then \
+	    MAINTSCRIPT=$$(echo $$FILE | sed 's/.in$$//'); \
+	    sed -n '1,/^#INCLUDE_SHELL_LIB#$$/p' <$$FILE \
+	      | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >$$MAINTSCRIPT.tmp; \
+	    cat debian/xsfbs/xsfbs.sh >>$$MAINTSCRIPT.tmp; \
+	    sed -n '/^#INCLUDE_SHELL_LIB#$$/,$$p' <$$FILE \
+	      | sed -e '/^#INCLUDE_SHELL_LIB#$$/d' >>$$MAINTSCRIPT.tmp; \
+	    sed -e 's/@SOURCE_VERSION@/$(SOURCE_VERSION)/' \
+	        -e 's/@OFFICIAL_BUILD@/$(OFFICIAL_BUILD)/' \
+	        -e 's/@DEFAULT_DCRESOLUTIONS@/$(DEFAULT_DCRESOLUTIONS)/' \
+	      <$$MAINTSCRIPT.tmp >$$MAINTSCRIPT; \
+	    rm $$MAINTSCRIPT.tmp; \
+	  fi; \
+	done
+	# Validate syntax of generated shell scripts.
+	#sh debian/scripts/validate-posix-sh debian/*.config \
+	#                                    debian/*.postinst \
+	#                                    debian/*.postrm \
+	#                                    debian/*.preinst \
+	#                                    debian/*.prerm
+	>$@
+
+# Generate the shlibs.local file.
+debian/shlibs.local:
+	cat debian/*.shlibs >$@
+
+include debian/xsfbs/xsfbs-autoreconf.mk
+
+# vim:set noet ai sts=8 sw=8 tw=0:
--- xserver-xorg-video-nv-1.2.0.orig/debian/xsfbs/xsfbs-autoreconf.mk
+++ xserver-xorg-video-nv-1.2.0/debian/xsfbs/xsfbs-autoreconf.mk
@@ -0,0 +1,150 @@
+#!/usr/bin/make -f
+# $Id: xsfbs-autoreconf.mk 2284 2006-06-06 18:02:50Z branden $
+
+# Automagical conversion of autoreconf results into quilt patches.
+
+# Copyright 2006 Eugene Konev
+#
+# Licensed under the GNU General Public License, version 2.  See the file
+# /usr/share/common-licenses/GPL or <http://www.gnu.org/copyleft/gpl.txt>.
+
+# The idea behind this is storing changes produced by autoreconf as a 
+# separate patch on quilt stack (on top of stack actually).
+# The only usable target here is 'autoreconf`. Other targets are not
+# supposed to be called directly. DO NOT invoke them, unless you know what
+# you are doing.
+# The autoreconf target will check if files with names in $(RECONF_CHECKFILES)
+# were changed during patching (from upstream version or from previously
+# autoreconfed version) and call actual autoreconfing if they were.
+# The actual autoreconfing target (doautoreconf) WILL FAIL after 
+# calling autoreconf and pushing changes into quilt stack by design. It
+# should never be invoked by automatic build process.
+# The proposed use is adding autoreconf into clean's prerequisites before
+# xsfclean like:
+# - clean: xsfclean
+# + clean: autoreconf xsfclean
+# This will ensure it is called when you build package with dpkg-buildpackage.
+
+# This dir will be used for producing diff of autoreconfed tree
+RECONF_DIR := xsfautoreconf
+
+# This files will be checked for changes
+RECONF_CHECKFILES += configure.ac Makefile.am
+
+# This files will not be hardlinked but copied
+RECONF_NOLINKFILES += aclocal.m4
+
+# This files/dirs will be pruned after autoreconf run
+RECONF_PRUNEFILES += autom4te.cache config.h.in~ aclocal.m4~
+
+# Internal target. Never invoke directly.
+stampdir_target+=check.md5sum
+$(STAMP_DIR)/check.md5sum:
+	dh_testdir
+	$(MAKE) -f debian/rules prepare
+	for F in $(RECONF_CHECKFILES); do \
+	  find . -wholename ./$(STAMP_DIR) -prune -o -name $$F -print | \
+	    LC_ALL=C sort | xargs --no-run-if-empty md5sum >>$@; \
+	done
+
+# Internal target. Never invoke directly.
+$(STAMP_DIR)/clean.md5sum:
+	dh_testdir
+	$(MAKE) -f debian/rules unpatch
+	rm -f $(STAMP_DIR)/check.md5sum
+	$(MAKE) -f debian/rules $(STAMP_DIR)/check.md5sum
+	mv $(STAMP_DIR)/check.md5sum $@
+
+# Internal target. Never invoke directly.
+debian/patches/patched.md5sum:
+	dh_testdir
+	[ -f $(STAMP_DIR)/clean.md5sum ] || \
+	  $(MAKE) -f debian/rules $(STAMP_DIR)/clean.md5sum
+
+	$(MAKE) -f debian/rules patch
+	rm -f $(STAMP_DIR)/check.md5sum
+	$(MAKE) -f debian/rules $(STAMP_DIR)/check.md5sum
+	if ! diff $(STAMP_DIR)/clean.md5sum \
+	          $(STAMP_DIR)/check.md5sum > /dev/null; then \
+	  $(MAKE) -f debian/rules doautoreconf; \
+	else \
+	  mv $(STAMP_DIR)/check.md5sum $@; \
+	fi
+
+# Internal target. Never invoke directly.
+,PHONY: doautoreconf
+doautoreconf: patch
+	quilt push -a >>$(STAMP_DIR)/log/autoreconf 2>&1 || true
+	if quilt applied | grep ^autoreconf.diff$$ > /dev/null; then \
+	  quilt pop -a >>$(STAMP_DIR)/log/autoreconf 2>&1; \
+	  quilt rename -p autoreconf.diff autoreconf-old.diff \
+	       >>$(STAMP_DIR)/log/autoreconf 2>&1; \
+	  quilt delete autoreconf-old.diff >>$(STAMP_DIR)/log/autoreconf 2>&1; \
+	  quilt push -a >>$(STAMP_DIR)/log/autoreconf 2>&1; \
+	fi
+
+	if [ -e $(RECONF_DIR) ]; then \
+	  echo "ERROR: $(RECONF_DIR) already exists. Cleanup by hand"; \
+	  exit 1; \
+	fi
+
+	mkdir -p $(RECONF_DIR)/before
+	find . -maxdepth 1 -mindepth 1 ! -wholename ./$(RECONF_DIR) \
+	     -a ! -wholename ./debian -a ! -wholename ./patches \
+	     -a ! -wholename ./.pc -a ! -wholename ./$(STAMP_DIR) | \
+	  xargs -i{} cp -al {} $(RECONF_DIR)/before/
+
+	for F in $(RECONF_PRUNEFILES); do \
+	  find $(RECONF_DIR)/before -name $$F -print | \
+	    xargs --no-run-if-empty rm -r; \
+	done
+
+	cp -al $(RECONF_DIR)/before $(RECONF_DIR)/after
+
+	for F in $(RECONF_NOLINKFILES); do \
+	  find . -wholename ./$(RECONF_DIR) -prune -o -wholename ./debian \
+	       -prune -o -wholename ./$(STAMP_DIR) -prune -o -name $$F \
+	       -print | \
+	    xargs --no-run-if-empty -i{} cp --remove-destination {} \
+	      $(RECONF_DIR)/after/{}; \
+	done
+
+	cd $(RECONF_DIR)/after && autoreconf -v --install && \
+	  for F in $(RECONF_PRUNEFILES); do \
+	    find . -name $$F -print | \
+	      xargs --no-run-if-empty rm -r; \
+	  done
+
+	cd $(RECONF_DIR) && diff -Nru before after > autoreconf.diff || true
+
+	quilt import $(RECONF_DIR)/autoreconf.diff \
+	      >>$(STAMP_DIR)/log/autoreconf 2>&1
+
+	mv $(STAMP_DIR)/check.md5sum debian/patches/patched.md5sum
+
+	rm -r $(RECONF_DIR) && rm -f patches/autoreconf-old.diff
+
+	@echo 
+	@echo "****************************************************************"
+	@echo "  This target is made to fail INTENTIONALLY. It should NEVER    "
+	@echo "  be invoked during automatic builds.                           "
+	@echo 
+	@echo "  This target was invoked because you added/removed/changed     "
+	@echo "  patches which modify either configure.ac or Makefile.am and,  "
+	@echo "  thus, require autoreconf run. And all autoreconfing should    "
+	@echo "  happen before uploading.                                      "
+	@echo 
+	@echo "  (See also debian/xsfbs/xsfbs-autoreconf.mk)                   "
+	@echo 
+	@echo "  If you see this message, autoreconfing actually SUCCEEDED,    "
+	@echo "  and your build should finish successfully, when rerun.        "
+	@echo "****************************************************************"
+	@echo 
+	exit 1;
+
+.PHONY: autoreconf
+autoreconf: debian/patches/patched.md5sum patch $(STAMP_DIR)/check.md5sum
+	if ! diff $(STAMP_DIR)/check.md5sum \
+	          debian/patches/patched.md5sum > /dev/null; then \
+	  $(MAKE) -f debian/rules doautoreconf; \
+	fi
--- xserver-xorg-video-nv-1.2.0.orig/debian/xsfbs/xsfbs.sh
+++ xserver-xorg-video-nv-1.2.0/debian/xsfbs/xsfbs.sh
@@ -0,0 +1,907 @@
+# $Id: xsfbs.sh 2888 2006-08-22 03:04:13Z dnusinow $
+
+# This is the X Strike Force shell library for X Window System package
+# maintainer scripts.  It serves to define shell functions commonly used by
+# such packages, and performs some error checking necessary for proper operation
+# of those functions.  By itself, it does not "do" much; the maintainer scripts
+# invoke the functions defined here to accomplish package installation and
+# removal tasks.
+
+# If you are reading this within a Debian package maintainer script (e.g.,
+# /var/lib/dpkg)info/PACKAGE.{config,preinst,postinst,prerm,postrm}), you can
+# skip past this library by scanning forward in this file to the string
+# "GOBSTOPPER".
+
+SOURCE_VERSION=@SOURCE_VERSION@
+OFFICIAL_BUILD=@OFFICIAL_BUILD@
+
+# Use special abnormal exit codes so that problems with this library are more
+# easily tracked down.
+SHELL_LIB_INTERNAL_ERROR=86
+SHELL_LIB_THROWN_ERROR=74
+SHELL_LIB_USAGE_ERROR=99
+
+# old -> new variable names
+if [ -z "$DEBUG_XORG_PACKAGE" ] && [ -n "$DEBUG_XFREE86_PACKAGE" ]; then
+  DEBUG_XORG_PACKAGE="$DEBUG_XFREE86_PACKAGE"
+fi
+if [ -z "$DEBUG_XORG_DEBCONF" ] && [ -n "$DEBUG_XFREE86_DEBCONF" ]; then
+  DEBUG_XORG_DEBCONF="$DEBUG_XFREE86_DEBCONF"
+fi
+
+# initial sanity checks
+if [ -z "$THIS_PACKAGE" ]; then
+  cat >&2 <<EOF
+Error: package maintainer script attempted to use shell library without
+definining \$THIS_PACKAGE shell variable.  Please report the package name,
+version, and the text of this error message to the Debian Bug Tracking System.
+Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of this package.
+EOF
+  exit $SHELL_LIB_USAGE_ERROR
+fi
+
+if [ -z "$THIS_SCRIPT" ]; then
+  cat >&2 <<EOF
+Error: package maintainer script attempted to use shell library without
+definining \$THIS_SCRIPT shell variable.  Please report the package name,
+version, and the text of this error message to the Debian Bug Tracking System.
+Visit <http://www.debian.org/Bugs/Reporting> on the World Wide Web for
+instructions, read the file /usr/share/doc/debian/bug-reporting.txt from the
+"doc-debian" package, or install the "reportbug" package and use the command of
+the same name to file a report against version $SOURCE_VERSION of the
+"$THIS_PACKAGE" package.
+EOF
+  exit $SHELL_LIB_USAGE_ERROR
+fi
+
+ARCHITECTURE="$(dpkg --print-installation-architecture)"
+
+LAPTOP=""
+if [ -n "$(which laptop-detect)" ]; then
+    if laptop-detect >/dev/null; then
+	LAPTOP=true
+    fi
+fi
+
+if [ "$1" = "reconfigure" ] || [ -n "$DEBCONF_RECONFIGURE" ]; then
+  RECONFIGURE="true"
+else
+  RECONFIGURE=
+fi
+
+if ([ "$1" = "install" ] || [ "$1" = "configure" ]) && [ -z "$2" ]; then
+  FIRSTINST="yes"
+fi
+
+if [ -z "$RECONFIGURE" ] && [ -z "$FIRSTINST" ]; then
+  UPGRADE="yes"
+fi
+
+trap "message;\
+      message \"Received signal.  Aborting $THIS_PACKAGE package $THIS_SCRIPT script.\";\
+      message;\
+      exit 1" HUP INT QUIT TERM
+
+reject_nondigits () {
+  # syntax: reject_nondigits [ operand ... ]
+  #
+  # scan operands (typically shell variables whose values cannot be trusted) for
+  # characters other than decimal digits and barf if any are found
+  while [ -n "$1" ]; do
+    # does the operand contain anything but digits?
+    if ! expr "$1" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+      # can't use die(), because it wraps message() which wraps this function
+      echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_nondigits() encountered" \
+           "possibly malicious garbage \"$1\"" >&2
+      exit $SHELL_LIB_THROWN_ERROR
+    fi
+    shift
+  done
+}
+
+reject_whitespace () {
+  # syntax: reject_whitespace [ operand ]
+  #
+  # scan operand (typically a shell variable whose value cannot be trusted) for
+  # whitespace characters and barf if any are found
+  if [ -n "$1" ]; then
+    # does the operand contain any whitespace?
+    if expr "$1" : "[[:space:]]" > /dev/null 2>&1; then
+      # can't use die(), because I want to avoid forward references
+      echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_whitespace() encountered" \
+           "possibly malicious garbage \"$1\"" >&2
+      exit $SHELL_LIB_THROWN_ERROR
+    fi
+  fi
+}
+
+reject_unlikely_path_chars () {
+  # syntax: reject_unlikely_path_chars [ operand ... ]
+  #
+  # scan operands (typically shell variables whose values cannot be trusted) for
+  # characters unlikely to be seen in a path and which the shell might
+  # interpret and barf if any are found
+  while [ -n "$1" ]; do
+    # does the operand contain any funny characters?
+    if expr "$1" : '.*[!$&()*;<>?|].*' > /dev/null 2>&1; then
+      # can't use die(), because I want to avoid forward references
+      echo "$THIS_PACKAGE $THIS_SCRIPT error: reject_unlikely_path_chars()" \
+           "encountered possibly malicious garbage \"$1\"" >&2
+      exit $SHELL_LIB_THROWN_ERROR
+    fi
+    shift
+  done
+}
+
+# Query the terminal to establish a default number of columns to use for
+# displaying messages to the user.  This is used only as a fallback in the
+# event the COLUMNS variable is not set.  ($COLUMNS can react to SIGWINCH while
+# the script is running, and this cannot, only being calculated once.)
+DEFCOLUMNS=$(stty size 2> /dev/null | awk '{print $2}') || true
+if ! expr "$DEFCOLUMNS" : "[[:digit:]]\+$" > /dev/null 2>&1; then
+  DEFCOLUMNS=80
+fi
+
+message () {
+  # pretty-print messages of arbitrary length
+  reject_nondigits "$COLUMNS"
+  echo "$*" | fmt -t -w ${COLUMNS:-$DEFCOLUMNS} >&2
+}
+
+observe () {
+  # syntax: observe message ...
+  #
+  # issue observational message suitable for logging someday when support for
+  # it exists in dpkg
+  if [ -n "$DEBUG_XORG_PACKAGE" ]; then
+    message "$THIS_PACKAGE $THIS_SCRIPT note: $*"
+  fi
+}
+
+warn () {
+  # syntax: warn message ...
+  #
+  # issue warning message suitable for logging someday when support for
+  # it exists in dpkg; also send to standard error
+  message "$THIS_PACKAGE $THIS_SCRIPT warning: $*"
+}
+
+die () {
+  # syntax: die message ...
+  #
+  # exit script with error message
+  message "$THIS_PACKAGE $THIS_SCRIPT error: $*"
+  exit $SHELL_LIB_THROWN_ERROR
+}
+
+internal_error () {
+  # exit script with error; essentially a "THIS SHOULD NEVER HAPPEN" message
+  message "internal error: $*"
+  if [ -n "$OFFICIAL_BUILD" ]; then
+    message "Please report a bug in the $THIS_SCRIPT script of the" \
+            "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+            "Tracking System.  Include all messages above that mention the" \
+            "$THIS_PACKAGE package.  Visit " \
+            "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
+            "instructions, read the file" \
+            "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+            "package, or install the reportbug package and use the command of" \
+            "the same name to file a report."
+  fi
+  exit $SHELL_LIB_INTERNAL_ERROR
+}
+
+usage_error () {
+  message "usage error: $*"
+  message "Please report a bug in the $THIS_SCRIPT script of the" \
+          "$THIS_PACKAGE package, version $SOURCE_VERSION to the Debian Bug" \
+          "Tracking System.  Include all messages above that mention the" \
+          "$THIS_PACKAGE package.  Visit " \
+          "<http://www.debian.org/Bugs/Reporting> on the World Wide Web for" \
+          "instructions, read the file" \
+          "/usr/share/doc/debian/bug-reporting.txt from the doc-debian" \
+          "package, or install the reportbug package and use the command of" \
+          "the same name to file a report."
+  exit $SHELL_LIB_USAGE_ERROR
+}
+
+
+maplink () {
+  # returns what symlink should point to; i.e., what the "sane" answer is
+  # Keep this in sync with the debian/*.links files.
+  # This is only needed for symlinks to directories.
+  #
+  # XXX: Most of these look wrong in the X11R7 world and need to be fixed.
+  # If we've stopped using this function, fixing it might enable us to re-enable
+  # it again and catch more errors.
+  case "$1" in
+    /etc/X11/xkb/compiled) echo /var/lib/xkb ;;
+    /etc/X11/xkb/xkbcomp) echo /usr/X11R6/bin/xkbcomp ;;
+    /usr/X11R6/lib/X11/app-defaults) echo /etc/X11/app-defaults ;;
+    /usr/X11R6/lib/X11/fs) echo /etc/X11/fs ;;
+    /usr/X11R6/lib/X11/lbxproxy) echo /etc/X11/lbxproxy ;;
+    /usr/X11R6/lib/X11/proxymngr) echo /etc/X11/proxymngr ;;
+    /usr/X11R6/lib/X11/rstart) echo /etc/X11/rstart ;;
+    /usr/X11R6/lib/X11/twm) echo /etc/X11/twm ;;
+    /usr/X11R6/lib/X11/xdm) echo /etc/X11/xdm ;;
+    /usr/X11R6/lib/X11/xinit) echo /etc/X11/xinit ;;
+    /usr/X11R6/lib/X11/xkb) echo /etc/X11/xkb ;;
+    /usr/X11R6/lib/X11/xserver) echo /etc/X11/xserver ;;
+    /usr/X11R6/lib/X11/xsm) echo /etc/X11/xsm ;;
+    /usr/bin/X11) echo ../X11R6/bin ;;
+    /usr/bin/rstartd) echo ../X11R6/bin/rstartd ;;
+    /usr/include/X11) echo ../X11R6/include/X11 ;;
+    /usr/lib/X11) echo ../X11R6/lib/X11 ;;
+    *) internal_error "maplink() called with unknown path \"$1\"" ;;
+  esac
+}
+
+analyze_path () {
+  # given a supplied set of pathnames, break each one up by directory and do an
+  # ls -dl on each component, cumulatively; i.e.
+  # analyze_path /usr/X11R6/bin -> ls -dl /usr /usr/X11R6 /usr/X11R6/bin
+  # Thanks to Randolph Chung for this clever hack.
+
+  #local f g
+
+  while [ -n "$1" ]; do
+    reject_whitespace "$1"
+    _g=
+    message "Analyzing $1:"
+    for _f in $(echo "$1" | tr / \  ); do
+      if [ -e /$_g$_f ]; then
+        ls -dl /$_g$_f /$_g$_f.dpkg-* 2> /dev/null || true
+        _g=$_g$_f/
+      else
+        message "/$_g$_f: nonexistent; directory contents of /$_g:"
+        ls -l /$_g
+        break
+      fi
+    done
+    shift
+  done
+}
+
+find_culprits () {
+  #local f p dpkg_info_dir possible_culprits smoking_guns bad_packages package \
+  #  msg
+
+  reject_whitespace "$1"
+  message "Searching for overlapping packages..."
+  _dpkg_info_dir=/var/lib/dpkg/info
+  if [ -d $_dpkg_info_dir ]; then
+    if [ "$(echo $_dpkg_info_dir/*.list)" != "$_dpkg_info_dir/*.list" ]; then
+      _possible_culprits=$(ls -1 $_dpkg_info_dir/*.list | egrep -v \
+        "(xbase-clients|x11-common|xfs|xlibs)")
+      if [ -n "$_possible_culprits" ]; then
+        _smoking_guns=$(grep -l "$1" $_possible_culprits || true)
+        if [ -n "$_smoking_guns" ]; then
+          _bad_packages=$(printf "\\n")
+          for f in $_smoking_guns; do
+            # too bad you can't nest parameter expansion voodoo
+            p=${f%*.list}      # strip off the trailing ".list"
+            _package=${p##*/}   # strip off the directories
+            _bad_packages=$(printf "%s\n%s" "$_bad_packages" "$_package")
+          done
+          _msg=$(cat <<EOF
+The following packages appear to have file overlaps with the X.Org packages;
+these packages are either very old, or in violation of Debian Policy.  Try
+upgrading each of these packages to the latest available version if possible:
+for example, with the command "apt-get install".  If no newer version of a
+package is available, you will have to remove it; for example, with the command
+"apt-get remove".  If even the latest available version of the package has
+this file overlap, please file a bug against that package with the Debian Bug
+Tracking System.  You may want to refer the package maintainer to section 12.8
+of the Debian Policy manual.
+EOF
+)
+          message "$_msg"
+          message "The overlapping packages are: $_bad_packages"
+        else
+          message "no overlaps found."
+        fi
+      fi
+    else
+      message "cannot search; no matches for $_dpkg_info_dir/*.list."
+    fi
+  else
+    message "cannot search; $_dpkg_info_dir does not exist."
+  fi
+}
+
+# we require a readlink command or shell function
+if ! which readlink > /dev/null 2>&1; then
+  message "The readlink command was not found.  Please install version" \
+          "1.13.1 or later of the debianutils package."
+  readlink () {
+    # returns what symlink in $1 actually points to
+    perl -e '$l = shift; exit 1 unless -l $l; $r = readlink $l; exit 1 unless $r; print "$r\n"' "$1"
+  }
+fi
+
+check_symlink () {
+  # syntax: check_symlink symlink
+  #
+  # See if specified symlink points where it is supposed to.  Return 0 if it
+  # does, and 1 if it does not.
+  #
+  # Primarily used by check_symlinks_and_warn() and check_symlinks_and_bomb().
+
+  #local symlink
+
+  # validate arguments
+  if [ $# -ne 1 ]; then
+    usage_error "check_symlink() called with wrong number of arguments;" \
+                "expected 1, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  _symlink="$1"
+
+  if [ "$(maplink "$_symlink")" = "$(readlink "$_symlink")" ]; then
+    return 0
+  else
+    return 1
+  fi
+}
+
+check_symlinks_and_warn () {
+  # syntax: check_symlinks_and_warn symlink ...
+  #
+  # For each argument, check for symlink sanity, and warn if it isn't sane.
+  #
+  # Call this function from a preinst script in the event $1 is "upgrade" or
+  # "install".
+
+  #local errmsg symlink
+
+  # validate arguments
+  if [ $# -lt 1 ]; then
+    usage_error "check_symlinks_and_warn() called with wrong number of" \
+                "arguments; expected at least 1, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  while [ -n "$1" ]; do
+    _symlink="$1"
+    if [ -L "$_symlink" ]; then
+      if ! check_symlink "$_symlink"; then
+        observe "$_symlink symbolic link points to wrong location" \
+                "$(readlink "$_symlink"); removing"
+        rm "$_symlink"
+      fi
+    elif [ -e "$_symlink" ]; then
+      _errmsg="$_symlink exists and is not a symbolic link; this package cannot"
+      _errmsg="$_errmsg be installed until this"
+      if [ -f "$_symlink" ]; then
+        _errmsg="$_errmsg file"
+      elif [ -d "$_symlink" ]; then
+        _errmsg="$_errmsg directory"
+      else
+        _errmsg="$_errmsg thing"
+      fi
+      _errmsg="$_errmsg is removed"
+      die "$_errmsg"
+    fi
+    shift
+  done
+}
+
+check_symlinks_and_bomb () {
+  # syntax: check_symlinks_and_bomb symlink ...
+  #
+  # For each argument, check for symlink sanity, and bomb if it isn't sane.
+  #
+  # Call this function from a postinst script.
+
+  #local problem symlink
+
+  # validate arguments
+  if [ $# -lt 1 ]; then
+    usage_error "check_symlinks_and_bomb() called with wrong number of"
+                "arguments; expected at least 1, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  while [ -n "$1" ]; do
+    _problem=
+    _symlink="$1"
+    if [ -L "$_symlink" ]; then
+      if ! check_symlink "$_symlink"; then
+        _problem=yes
+        warn "$_symlink symbolic link points to wrong location" \
+             "$(readlink "$_symlink")"
+      fi
+    elif [ -e "$_symlink" ]; then
+      _problem=yes
+      warn "$_symlink is not a symbolic link"
+    else
+      _problem=yes
+      warn "$_symlink symbolic link does not exist"
+    fi
+    if [ -n "$_problem" ]; then
+      analyze_path "$_symlink" "$(readlink "$_symlink")"
+      find_culprits "$_symlink"
+      die "bad symbolic links on system"
+    fi
+    shift
+  done
+}
+
+font_update () {
+  # run $UPDATECMDS in $FONTDIRS
+
+  #local dir cmd shortcmd x_font_dir_prefix
+
+  _x_font_dir_prefix="/usr/share/fonts/X11"
+
+  if [ -z "$UPDATECMDS" ]; then
+    usage_error "font_update() called but \$UPDATECMDS not set"
+  fi
+  if [ -z "$FONTDIRS" ]; then
+    usage_error "font_update() called but \$FONTDIRS not set"
+  fi
+
+  reject_unlikely_path_chars "$UPDATECMDS"
+  reject_unlikely_path_chars "$FONTDIRS"
+
+  for _dir in $FONTDIRS; do
+    if [ -d "$_x_font_dir_prefix/$_dir" ]; then
+      for _cmd in $UPDATECMDS; do
+        if which "$_cmd" > /dev/null 2>&1; then
+          _shortcmd=${_cmd##*/}
+          observe "running $_shortcmd in $_dir font directory"
+	  _cmd_opts=
+          if [ "$_shortcmd" = "update-fonts-alias" ]; then
+            _cmd_opts=--x11r7-layout
+          fi
+          if [ "$_shortcmd" = "update-fonts-dir" ]; then
+            _cmd_opts=--x11r7-layout
+          fi
+          if [ "$_shortcmd" = "update-fonts-scale" ]; then
+            _cmd_opts=--x11r7-layout
+          fi
+          $_cmd $_cmd_opts $_dir || warn "$_cmd $_cmd_opts $_dir" \
+                              "failed; font directory data may not" \
+                              "be up to date"
+        else
+          warn "$_cmd not found; not updating corresponding $_dir font" \
+               "directory data"
+        fi
+      done
+    else
+      warn "$_dir is not a directory; not updating font directory data"
+    fi
+  done
+}
+
+remove_conffile_prepare () {
+  # syntax: remove_conffile_prepare filename official_md5sum ...
+  #
+  # Check a conffile "filename" against a list of canonical MD5 checksums.
+  # If the file's current MD5 checksum matches one of the "official_md5sum"
+  # operands provided, then prepare the conffile for removal from the system.
+  # We defer actual deletion until the package is configured so that we can
+  # roll this operation back if package installation fails.
+  #
+  # Call this function from a preinst script in the event $1 is "upgrade" or
+  # "install" and verify $2 to ensure the package is being upgraded from a
+  # version (or installed over a version removed-but-not-purged) prior to the
+  # one in which the conffile was obsoleted.
+
+  #local conffile current_checksum
+
+  # validate arguments
+  if [ $# -lt 2 ]; then
+    usage_error "remove_conffile_prepare() called with wrong number of" \
+                "arguments; expected at least 2, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  _conffile="$1"
+  shift
+
+  # does the _conffile even exist?
+  if [ -e "$_conffile" ]; then
+    # calculate its checksum
+    _current_checksum=$(md5sum < "$_conffile" | sed 's/[[:space:]].*//')
+    # compare it to each supplied checksum
+    while [ -n "$1" ]; do
+      if [ "$_current_checksum" = "$1" ]; then
+        # we found a match; move the confffile and stop looking
+        observe "preparing obsolete conffile $_conffile for removal"
+        mv "$_conffile" "$_conffile.$THIS_PACKAGE-tmp"
+        break
+      fi
+      shift
+    done
+  fi
+}
+
+remove_conffile_commit () {
+  # syntax: remove_conffile_commit filename
+  #
+  # Complete the removal of a conffile "filename" that has become obsolete.
+  #
+  # Call this function from a postinst script after having used
+  # remove_conffile_prepare() in the preinst.
+
+  #local conffile
+
+  # validate arguments
+  if [ $# -ne 1 ]; then
+    usage_error "remove_conffile_commit() called with wrong number of" \
+                "arguments; expected 1, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  _conffile="$1"
+
+  # if the temporary file created by remove_conffile_prepare() exists, remove it
+  if [ -e "$_conffile.$THIS_PACKAGE-tmp" ]; then
+    observe "committing removal of obsolete conffile $_conffile"
+    rm "$_conffile.$THIS_PACKAGE-tmp"
+  fi
+}
+
+remove_conffile_rollback () {
+  # syntax: remove_conffile_rollback filename
+  #
+  # Roll back the removal of a conffile "filename".
+  #
+  # Call this function from a postrm script in the event $1 is "abort-upgrade"
+  # or "abort-install" is  after having used remove_conffile_prepare() in the
+  # preinst.
+
+  #local conffile
+
+  # validate arguments
+  if [ $# -ne 1 ]; then
+    usage_error "remove_conffile_rollback() called with wrong number of" \
+                "arguments; expected 1, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  _conffile="$1"
+
+  # if the temporary file created by remove_conffile_prepare() exists, move it
+  # back
+  if [ -e "$_conffile.$THIS_PACKAGE-tmp" ]; then
+    observe "rolling back removal of obsolete conffile $_conffile"
+    mv "$_conffile.$THIS_PACKAGE-tmp" "$_conffile"
+  fi
+}
+
+replace_conffile_with_symlink_prepare () {
+  # syntax: replace_conffile_with_symlink_prepare oldfilename newfilename \
+  # official_md5sum ...
+  #
+  # Check a conffile "oldfilename" against a list of canonical MD5 checksums.
+  # If the file's current MD5 checksum matches one of the "official_md5sum"
+  # operands provided, then prepare the conffile for removal from the system.
+  # We defer actual deletion until the package is configured so that we can
+  # roll this operation back if package installation fails. Otherwise copy it
+  # to newfilename and let dpkg handle it through conffiles mechanism.
+  #
+  # Call this function from a preinst script in the event $1 is "upgrade" or
+  # "install" and verify $2 to ensure the package is being upgraded from a
+  # version (or installed over a version removed-but-not-purged) prior to the
+  # one in which the conffile was obsoleted.
+
+  #local conffile current_checksum
+
+  # validate arguments
+  if [ $# -lt 3 ]; then
+    usage_error "replace_conffile_with_symlink_prepare() called with wrong" \
+                " number of arguments; expected at least 3, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  _oldconffile="$1"
+  shift
+  _newconffile="$1"
+  shift
+
+  remove_conffile_prepare "$_oldconffile" "$@"
+  # If $_oldconffile still exists, then md5sums didn't match.
+  # Copy it to new one.
+  if [ -f "$_oldconffile" ]; then
+    cp "$_oldconffile" "$_newconffile"
+  fi
+
+}
+
+replace_conffile_with_symlink_commit () {
+  # syntax: replace_conffile_with_symlink_commit oldfilename
+  #
+  # Complete the removal of a conffile "oldfilename" that has been
+  # replaced by a symlink.
+  #
+  # Call this function from a postinst script after having used
+  # replace_conffile_with_symlink_prepare() in the preinst.
+
+  #local conffile
+
+  # validate arguments
+  if [ $# -ne 1 ]; then
+    usage_error "replace_conffile_with_symlink_commit() called with wrong" \
+                "number of arguments; expected 1, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  _conffile="$1"
+
+  remove_conffile_commit "$_conffile"
+}
+
+replace_conffile_with_symlink_rollback () {
+  # syntax: replace_conffile_with_symlink_rollback oldfilename newfilename
+  #
+  # Roll back the replacing of a conffile "oldfilename" with symlink to
+  # "newfilename".
+  #
+  # Call this function from a postrm script in the event $1 is "abort-upgrade"
+  # or "abort-install" and verify $2 to ensure the package failed to upgrade
+  # from a version (or install over a version removed-but-not-purged) prior
+  # to the one in which the conffile was obsoleted.
+  # You should have  used replace_conffile_with_symlink_prepare() in the
+  # preinst.
+
+  #local conffile
+
+  # validate arguments
+  if [ $# -ne 2 ]; then
+    usage_error "replace_conffile_with_symlink_rollback() called with wrong" \
+                "number of arguments; expected 2, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  _oldconffile="$1"
+  _newconffile="$2"
+
+  remove_conffile_rollback "$_oldconffile"
+  if [ -f "$_newconffile" ]; then
+    rm "$_newconffile"
+  fi
+}
+
+run () {
+  # syntax: run command [ argument ... ]
+  #
+  # Run specified command with optional arguments and report its exit status.
+  # Useful for commands whose exit status may be nonzero, but still acceptable,
+  # or commands whose failure is not fatal to us.
+  #
+  # NOTE: Do *not* use this function with db_get or db_metaget commands; in
+  # those cases the return value of the debconf command *must* be checked
+  # before the string returned by debconf is used for anything.
+
+  #local retval
+
+  # validate arguments
+  if [ $# -lt 1 ]; then
+    usage_error "run() called with wrong number of arguments; expected at" \
+                "least 1, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  "$@" || _retval=$?
+
+  if [ ${_retval:-0} -ne 0 ]; then
+    observe "command \"$*\" exited with status $_retval"
+  fi
+}
+
+register_x_lib_dir_with_ld_so () {
+  # syntax: register_x_lib_dir_with_ld_so
+  #
+  # Configure the dynamic loader ld.so to search /usr/X11R6/lib for shared
+  # libraries.
+  #
+  # Call this function from the postinst script of a package that places a
+  # shared library in /usr/X11R6/lib, before invoking ldconfig.
+
+  #local dir ldsoconf
+
+  _dir="/usr/X11R6/lib"
+  _ldsoconf="/etc/ld.so.conf"
+
+  # is the line not already present?
+  if ! fgrep -qsx "$_dir" "$_ldsoconf"; then
+    observe "adding $_dir directory to $_ldsoconf"
+    echo "$_dir" >> "$_ldsoconf"
+  fi
+}
+
+deregister_x_lib_dir_with_ld_so () {
+  # syntax: deregister_x_lib_dir_with_ld_so
+  #
+  # Configure dynamic loader ld.so to not search /usr/X11R6/lib for shared
+  # libraries, if and only if no shared libaries remain there.
+  #
+  # Call this function from the postrm script of a package that places a shared
+  # library in /usr/X11R6/lib, in the event "$1" is "remove", and before
+  # invoking ldconfig.
+
+  #local dir ldsoconf fgrep_status cmp_status
+
+  _dir="/usr/X11R6/lib"
+  _ldsoconf="/etc/ld.so.conf"
+
+  # is the line present?
+  if fgrep -qsx "$_dir" "$_ldsoconf"; then
+    # are there any shared objects in the directory?
+    if [ "$(echo "$_dir"/lib*.so.*.*)" = "$_dir/lib*.so.*.*" ]; then
+      # glob expansion produced nothing, so no shared libraries are present
+      observe "removing $_dir directory from $_ldsoconf"
+      # rewrite the file (very carefully)
+      set +e
+      fgrep -svx "$_dir" "$_ldsoconf" > "$_ldsoconf.dpkg-tmp"
+      _fgrep_status=$?
+      set -e
+      case $_fgrep_status in
+        0|1) ;; # we don't actually care if any lines matched or not
+        *) die "error reading \"$_ldsoconf\"; fgrep exited with status" \
+          "$_fgrep_status" ;;
+      esac
+      set +e
+      cmp -s "$_ldsoconf.dpkg-tmp" "$_ldsoconf"
+      _cmp_status=$?
+      set -e
+      case $_cmp_status in
+        0) rm "$_ldsoconf.dpkg-tmp" ;; # files are identical
+        1) mv "$_ldsoconf.dpkg-tmp" "$_ldsoconf" ;; # files differ
+        *) die "error comparing \"$_ldsoconf.dpkg-tmp\" to \"$_ldsoconf\";" \
+          "cmp exited with status $_cmp_status" ;;
+      esac
+    fi
+  fi
+}
+
+make_symlink_sane () {
+  # syntax: make_symlink_sane symlink target
+  #
+  # Ensure that the symbolic link symlink exists, and points to target.
+  #
+  # If symlink does not exist, create it and point it at target.
+  #
+  # If symlink exists but is not a symbolic link, back it up.
+  #
+  # If symlink exists, is a symbolic link, but points to the wrong location, fix
+  # it.
+  #
+  # If symlink exists, is a symbolic link, and already points to target, do
+  # nothing.
+  #
+  # This function wouldn't be needed if ln had an -I, --idempotent option.
+
+  # Validate arguments.
+  if [ $# -ne 2 ]; then
+    usage_error "make_symlink_sane() called with wrong number of arguments;" \
+      "expected 2, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  # We could just use the positional parameters as-is, but that makes things
+  # harder to follow.
+  #local symlink target
+
+  _symlink="$1"
+  _target="$2"
+
+  if [ -L "$_symlink" ] && [ "$(readlink "$_symlink")" = "$_target" ]; then
+      observe "link from $_symlink to $_target already exists"
+  else
+    observe "creating symbolic link from $_symlink to $_target"
+    mkdir -p "${_target%/*}" "${_symlink%/*}"
+    ln -s -b -S ".dpkg-old" "$_target" "$_symlink"
+  fi
+}
+
+migrate_dir_to_symlink () {
+  # syntax: migrate_dir_to_symlink old_location new_location
+  #
+  # Per Debian Policy section 6.5.4, "A directory will never be replaced by a
+  # symbolic link to a directory or vice versa; instead, the existing state
+  # (symlink or not) will be left alone and dpkg will follow the symlink if
+  # there is one."
+  #
+  # We have to do it ourselves.
+  #
+  # This function moves the contents of old_location, a directory, into
+  # new_location, a directory, then makes old_location a symbolic link to
+  # new_location.
+  #
+  # old_location need not exist, but if it does, it must be a directory (or a
+  # symlink to a directory).  If it is not, it is backed up.  If new_location
+  # exists already and is not a directory, it is backed up.
+  #
+  # This function should be called from a package's preinst so that other
+  # packages unpacked after this one --- but before this package's postinst runs
+  # --- are unpacked into new_location even if their payloads contain
+  # old_location filespecs.
+
+  # Validate arguments.
+  if [ $# -ne 2 ]; then
+    usage_error "migrate_dir_to_symlink() called with wrong number of"
+                "arguments; expected 2, got $#"
+    exit $SHELL_LIB_USAGE_ERROR
+  fi
+
+  # We could just use the positional parameters as-is, but that makes things
+  # harder to follow.
+  local _new _old
+
+  _old="$1"
+  _new="$2"
+
+  # Is old location a symlink?
+  if [ -L "$_old" ]; then
+    # Does it already point to new location?
+    if [ "$(readlink "$_old")" = "$_new" ]; then
+      # Nothing to do; migration has already been done.
+      observe "migration of $_old to $_new already done"
+      return 0
+    else
+      # Back it up.
+      warn "backing up symbolic link $_old as $_old.dpkg-old"
+      mv -b "$_old" "$_old.dpkg-old"
+    fi
+  fi
+
+  # Does old location exist, but is not a directory?
+  if [ -e "$_old" ] && ! [ -d "$_old" ]; then
+      # Back it up.
+      warn "backing up non-directory $_old as $_old.dpkg-old"
+      mv -b "$_old" "$_old.dpkg-old"
+  fi
+
+  observe "migrating $_old to $_new"
+
+  # Is new location a symlink?
+  if [ -L "$_new" ]; then
+    # Does it point the wrong way, i.e., back to where we're migrating from?
+    if [ "$(readlink "$_new")" = "$_old" ]; then
+      # Get rid of it.
+      observe "removing symbolic link $_new which points to $_old"
+      rm "$_new"
+    else
+      # Back it up.
+      warn "backing up symbolic link $_new as $_new.dpkg-old"
+      mv -b "$_new" "$_new.dpkg-old"
+    fi
+  fi
+
+  # Does new location exist, but is not a directory?
+  if [ -e "$_new" ] && ! [ -d "$_new" ]; then
+    warn "backing up non-directory $_new as $_new.dpkg-old"
+    mv -b "$_new" "$_new.dpkg-old"
+  fi
+
+  # Create new directory if it does not yet exist.
+  if ! [ -e "$_new" ]; then
+    observe "creating $_new"
+    mkdir -p "$_new"
+  fi
+
+  # Copy files in old location to new location.  Back up any filenames that
+  # already exist in the new location with the extension ".dpkg-old".
+  observe "copying files from $_old to $_new"
+  if ! (cd "$_old" && cp -a -b -S ".dpkg-old" . "$_new"); then
+    die "error(s) encountered while copying files from $_old to $_new"
+  fi
+
+  # Remove files at old location.
+  observe "removing $_old"
+  rm -r "$_old"
+
+  # Create symlink from old location to new location.
+  make_symlink_sane "$_old" "$_new"
+}
+
+# vim:set ai et sw=2 ts=2 tw=80:
+
+# GOBSTOPPER: The X Strike Force shell library ends here.
--- xserver-xorg-video-nv-1.2.0.orig/mkinstalldirs
+++ xserver-xorg-video-nv-1.2.0/mkinstalldirs
@@ -0,0 +1,111 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+  case $1 in
+    -h | --help | --h*)         # -h for help
+      echo "$usage" 1>&2
+      exit 0
+      ;;
+    -m)                         # -m PERM arg
+      shift
+      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
+      dirmode=$1
+      shift
+      ;;
+    --)                         # stop option processing
+      shift
+      break
+      ;;
+    -*)                         # unknown option
+      echo "$usage" 1>&2
+      exit 1
+      ;;
+    *)                          # first non-opt arg
+      break
+      ;;
+  esac
+done
+
+for file
+do
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+  0) exit 0 ;;
+esac
+
+case $dirmode in
+  '')
+    if mkdir -p -- . 2>/dev/null; then
+      echo "mkdir -p -- $*"
+      exec mkdir -p -- "$@"
+    fi
+    ;;
+  *)
+    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+      echo "mkdir -m $dirmode -p -- $*"
+      exec mkdir -m "$dirmode" -p -- "$@"
+    fi
+    ;;
+esac
+
+for file
+do
+  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+  shift
+
+  pathcomp=
+  for d
+  do
+    pathcomp="$pathcomp$d"
+    case $pathcomp in
+      -*) pathcomp=./$pathcomp ;;
+    esac
+
+    if test ! -d "$pathcomp"; then
+      echo "mkdir $pathcomp"
+
+      mkdir "$pathcomp" || lasterr=$?
+
+      if test ! -d "$pathcomp"; then
+  	errstatus=$lasterr
+      else
+  	if test ! -z "$dirmode"; then
+	  echo "chmod $dirmode $pathcomp"
+    	  lasterr=""
+  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+  	  if test ! -z "$lasterr"; then
+  	    errstatus=$lasterr
+  	  fi
+  	fi
+      fi
+    fi
+
+    pathcomp="$pathcomp/"
+  done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# End:
+# mkinstalldirs ends here